diff mbox series

[v2,5/6] ARM: dts: qcom: ipq8064: User generic node name for DMA

Message ID 20220410175056.79330-6-singh.kuldeep87k@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v2,1/6] ARM: dts: qcom: apq8064: User generic node name for DMA | expand

Commit Message

Kuldeep Singh April 10, 2022, 5:50 p.m. UTC
Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski April 10, 2022, 7:10 p.m. UTC | #1
On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..8366310ca5e3 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1155,7 +1155,7 @@  vsdcc_fixed: vsdcc-regulator {
 			regulator-always-on;
 		};
 
-		sdcc1bam: dma@12402000 {
+		sdcc1bam: dma-controller@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1165,7 +1165,7 @@  sdcc1bam: dma@12402000 {
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam: dma@12182000 {
+		sdcc3bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;