Message ID | 20220412125035.40312-9-quic_jinlmao@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Coresight: Add support for TPDM and TPDA | expand |
Hi On Tue, 12 Apr 2022 at 13:51, Mao Jinlong <quic_jinlmao@quicinc.com> wrote: > > Adds new coresight-tpda.yaml file describing the bindings required > to define tpda in the device trees. > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> > --- > .../bindings/arm/coresight-tpda.yaml | 119 ++++++++++++++++++ > 1 file changed, 119 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/coresight-tpda.yaml > > diff --git a/Documentation/devicetree/bindings/arm/coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/coresight-tpda.yaml > new file mode 100644 > index 000000000000..2c79de0a7928 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/coresight-tpda.yaml > @@ -0,0 +1,119 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +# Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/coresight-tpda.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Trace, Profiling and Diagnostics Aggregator - TPDA > + > +description: | > + TPDAs are responsible for packetization and timestamping of data sets > + utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or > + more attached TPDM and pushing the resultant (packetized) data out a > + master ATB interface. Performing an arbitrated ATB interleaving (funneling) > + task for free-flowing data from TPDM (i.e. CMB and DSB data set flows). > + > +maintainers: > + - Suzuki K Poulose <suzuki.poulose@arm.com> > + - Mathieu Poirier <mathieu.poirier@linaro.org> > + as mentioned in patch 03 - these should be bindings maintainers. with the above change Reviewed by: Mike Leach <mike.leach@linaro.org> > +properties: > + $nodename: > + pattern: "^tpda(@[0-9a-f]+)$" > + compatible: > + items: > + - const: qcom,coresight-tpda > + - const: arm,primecell > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: apb_pclk > + > + in-ports: > + type: object > + description: | > + Input connections from TPDM to TPDA > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > + patternProperties: > + "^port@[0-9a-f]+$": > + type: object > + required: > + - reg > + > + required: > + - '#size-cells' > + - '#address-cells' > + > + out-ports: > + type: object > + description: | > + Output connections from the TPDA to legacy CoreSight trace bus. > + $ref: /schemas/graph.yaml#/properties/ports > + > + properties: > + port: > + description: > + Output connection from the TPDA to legacy CoreSight Trace bus. > + $ref: /schemas/graph.yaml#/properties/port > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - in-ports > + - out-ports > + > +additionalProperties: false > + > +examples: > + # minimum tpda definition. > + - | > + tpda@6004000 { > + compatible = "qcom,coresight-tpda", "arm,primecell"; > + reg = <0x6004000 0x1000>; > + > + qcom,tpda-atid = <65>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb_pclk"; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + tpda_qdss_0_in_tpdm_dcc: endpoint { > + remote-endpoint = > + <&tpdm_dcc_out_tpda_qdss_0>; > + }; > + }; > + }; > + > + out-ports { > + port { > + tpda_qdss_out_funnel_in0: endpoint { > + remote-endpoint = > + <&funnel_in0_in_tpda_qdss>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.17.1 > -- Mike Leach Principal Engineer, ARM Ltd. Manchester Design Centre. UK
On 4/19/2022 4:32 PM, Mike Leach wrote: > Hi > > On Tue, 12 Apr 2022 at 13:51, Mao Jinlong <quic_jinlmao@quicinc.com> wrote: >> Adds new coresight-tpda.yaml file describing the bindings required >> to define tpda in the device trees. >> >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> >> --- >> .../bindings/arm/coresight-tpda.yaml | 119 ++++++++++++++++++ >> 1 file changed, 119 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/coresight-tpda.yaml >> >> diff --git a/Documentation/devicetree/bindings/arm/coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/coresight-tpda.yaml >> new file mode 100644 >> index 000000000000..2c79de0a7928 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/coresight-tpda.yaml >> @@ -0,0 +1,119 @@ >> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause >> +# Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/arm/coresight-tpda.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Trace, Profiling and Diagnostics Aggregator - TPDA >> + >> +description: | >> + TPDAs are responsible for packetization and timestamping of data sets >> + utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or >> + more attached TPDM and pushing the resultant (packetized) data out a >> + master ATB interface. Performing an arbitrated ATB interleaving (funneling) >> + task for free-flowing data from TPDM (i.e. CMB and DSB data set flows). >> + >> +maintainers: >> + - Suzuki K Poulose <suzuki.poulose@arm.com> >> + - Mathieu Poirier <mathieu.poirier@linaro.org> >> + > as mentioned in patch 03 - these should be bindings maintainers. > > with the above change > > Reviewed by: Mike Leach <mike.leach@linaro.org> > > Thank you Mike. I will address the comments in next version. > >> +properties: >> + $nodename: >> + pattern: "^tpda(@[0-9a-f]+)$" >> + compatible: >> + items: >> + - const: qcom,coresight-tpda >> + - const: arm,primecell >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + items: >> + - const: apb_pclk >> + >> + in-ports: >> + type: object >> + description: | >> + Input connections from TPDM to TPDA >> + $ref: /schemas/graph.yaml#/properties/ports >> + >> + properties: >> + '#address-cells': >> + const: 1 >> + >> + '#size-cells': >> + const: 0 >> + >> + patternProperties: >> + "^port@[0-9a-f]+$": >> + type: object >> + required: >> + - reg >> + >> + required: >> + - '#size-cells' >> + - '#address-cells' >> + >> + out-ports: >> + type: object >> + description: | >> + Output connections from the TPDA to legacy CoreSight trace bus. >> + $ref: /schemas/graph.yaml#/properties/ports >> + >> + properties: >> + port: >> + description: >> + Output connection from the TPDA to legacy CoreSight Trace bus. >> + $ref: /schemas/graph.yaml#/properties/port >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - in-ports >> + - out-ports >> + >> +additionalProperties: false >> + >> +examples: >> + # minimum tpda definition. >> + - | >> + tpda@6004000 { >> + compatible = "qcom,coresight-tpda", "arm,primecell"; >> + reg = <0x6004000 0x1000>; >> + >> + qcom,tpda-atid = <65>; >> + >> + clocks = <&aoss_qmp>; >> + clock-names = "apb_pclk"; >> + >> + in-ports { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + port@0 { >> + reg = <0>; >> + tpda_qdss_0_in_tpdm_dcc: endpoint { >> + remote-endpoint = >> + <&tpdm_dcc_out_tpda_qdss_0>; >> + }; >> + }; >> + }; >> + >> + out-ports { >> + port { >> + tpda_qdss_out_funnel_in0: endpoint { >> + remote-endpoint = >> + <&funnel_in0_in_tpda_qdss>; >> + }; >> + }; >> + }; >> + }; >> + >> +... >> -- >> 2.17.1 >> > > -- > Mike Leach > Principal Engineer, ARM Ltd. > Manchester Design Centre. UK
diff --git a/Documentation/devicetree/bindings/arm/coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/coresight-tpda.yaml new file mode 100644 index 000000000000..2c79de0a7928 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/coresight-tpda.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/coresight-tpda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trace, Profiling and Diagnostics Aggregator - TPDA + +description: | + TPDAs are responsible for packetization and timestamping of data sets + utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or + more attached TPDM and pushing the resultant (packetized) data out a + master ATB interface. Performing an arbitrated ATB interleaving (funneling) + task for free-flowing data from TPDM (i.e. CMB and DSB data set flows). + +maintainers: + - Suzuki K Poulose <suzuki.poulose@arm.com> + - Mathieu Poirier <mathieu.poirier@linaro.org> + +properties: + $nodename: + pattern: "^tpda(@[0-9a-f]+)$" + compatible: + items: + - const: qcom,coresight-tpda + - const: arm,primecell + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + in-ports: + type: object + description: | + Input connections from TPDM to TPDA + $ref: /schemas/graph.yaml#/properties/ports + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^port@[0-9a-f]+$": + type: object + required: + - reg + + required: + - '#size-cells' + - '#address-cells' + + out-ports: + type: object + description: | + Output connections from the TPDA to legacy CoreSight trace bus. + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port: + description: + Output connection from the TPDA to legacy CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - clocks + - clock-names + - in-ports + - out-ports + +additionalProperties: false + +examples: + # minimum tpda definition. + - | + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x6004000 0x1000>; + + qcom,tpda-atid = <65>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tpda_qdss_0_in_tpdm_dcc: endpoint { + remote-endpoint = + <&tpdm_dcc_out_tpda_qdss_0>; + }; + }; + }; + + out-ports { + port { + tpda_qdss_out_funnel_in0: endpoint { + remote-endpoint = + <&funnel_in0_in_tpda_qdss>; + }; + }; + }; + }; + +...