| Message ID | 20220413231736.991368-2-bryan.odonoghue@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add camss to SM8250 dtsi | expand |
Hi Bryan, On 4/14/22 02:17, Bryan O'Donoghue wrote: > Add the camcc DT node for the Camera Clock Controller on sm8250. > > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index af8f22636436..906bc8ed25b7 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -19,6 +19,7 @@ > #include <dt-bindings/sound/qcom,q6afe.h> > #include <dt-bindings/thermal/thermal.h> > #include <dt-bindings/clock/qcom,videocc-sm8250.h> > +#include <dt-bindings/clock/qcom,camcc-sm8250.h> please swap the two last lines to get a bit better alphanumeric order, it might be a good idea to sort out all the include directives. > / { > interrupt-parent = <&intc>; > @@ -3149,6 +3150,20 @@ videocc: clock-controller@abf0000 { > #power-domain-cells = <1>; > }; > > + camcc: clock-controller@ad00000 { > + compatible = "qcom,sm8250-camcc"; > + reg = <0 0x0ad00000 0 0x10000>; > + clocks = <&gcc GCC_VIDEO_AHB_CLK>, I believe it should be GCC_CAMERA_AHB_CLK. > + <&rpmhcc RPMH_CXO_CLK>, > + <&rpmhcc RPMH_CXO_CLK_A>; > + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; I see that the driver references to "sleep_clk", which won't be found automatically, since it's name is "sleep-clk", so, it might be reasonable to add it to the list. > + power-domains = <&rpmhpd SM8250_MMCX>; > + required-opps = <&rpmhpd_opp_low_svs>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > mdss: mdss@ae00000 { > compatible = "qcom,sm8250-mdss"; > reg = <0 0x0ae00000 0 0x1000>; -- Best wishes, Vladimir
On 14/04/2022 08:41, Vladimir Zapolskiy wrote: >> + clocks = <&gcc GCC_VIDEO_AHB_CLK>, > > I believe it should be GCC_CAMERA_AHB_CLK. > >> + <&rpmhcc RPMH_CXO_CLK>, >> + <&rpmhcc RPMH_CXO_CLK_A>; >> + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; > > I see that the driver references to "sleep_clk", which won't be found > automatically, since it's name is "sleep-clk", so, it might be reasonable > to add it to the list. Yep agreed. --- bod
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index af8f22636436..906bc8ed25b7 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -19,6 +19,7 @@ #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/clock/qcom,videocc-sm8250.h> +#include <dt-bindings/clock/qcom,camcc-sm8250.h> / { interrupt-parent = <&intc>; @@ -3149,6 +3150,20 @@ videocc: clock-controller@abf0000 { #power-domain-cells = <1>; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sm8250-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "iface", "bi_tcxo", "bi_tcxo_ao"; + power-domains = <&rpmhpd SM8250_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss: mdss@ae00000 { compatible = "qcom,sm8250-mdss"; reg = <0 0x0ae00000 0 0x1000>;
Add the camcc DT node for the Camera Clock Controller on sm8250. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+)