diff mbox series

[16/23] ARM: dts: qcom-msm8974: Convert ADSP to a MMIO device

Message ID 20220415115633.575010-17-konrad.dybcio@somainline.org (mailing list archive)
State Accepted
Headers show
Series [01/23] ARM: dts: qcom-*-sony*: Mention SONY board names in DT filenames | expand

Commit Message

Konrad Dybcio April 15, 2022, 11:56 a.m. UTC
The cx-supply has been removed as it's supposed to be set on a
per-board basis.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 60 ++++++++++++++---------------
 1 file changed, 30 insertions(+), 30 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 3370d48e9ad9..32938cdd5497 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -339,36 +339,6 @@  timer {
 		clock-frequency = <19200000>;
 	};
 
-	remoteproc_adsp: adsp-pil {
-		compatible = "qcom,msm8974-adsp-pil";
-
-		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-		cx-supply = <&pm8841_s2>;
-
-		clocks = <&xo_board>;
-		clock-names = "xo";
-
-		memory-region = <&adsp_region>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		smd-edge {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-			qcom,ipc = <&apcs 8 8>;
-			qcom,smd-edge = <1>;
-
-			label = "lpass";
-		};
-	};
-
 	smem {
 		compatible = "qcom,smem";
 
@@ -1590,6 +1560,36 @@  dsi0_phy: dsi-phy@fd922a00 {
 			};
 		};
 
+		remoteproc_adsp: remoteproc@fe200000 {
+			compatible = "qcom,msm8974-adsp-pil";
+			reg = <0xfe200000 0x100>;
+
+			interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					       <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			memory-region = <&adsp_region>;
+
+			qcom,smem-states = <&adsp_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			smd-edge {
+				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+				qcom,ipc = <&apcs 8 8>;
+				qcom,smd-edge = <1>;
+				label = "lpass";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		imem: imem@fe805000 {
 			status = "disabled";
 			compatible = "syscon", "simple-mfd";