| Message ID | 20220418205509.1102109-2-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Fix dtbs_check warning(s) for Qualcomm QMP PHY | expand |
On Tue, 19 Apr 2022 02:25:06 +0530, Bhupesh Sharma wrote: > '#clock-cells' is not a required property for qmp-phy(s) in the > '/' node, but it should be is used in 'phy@' subnode (where it is > actually a 'required' property). Fix the same. > > This also fixes the following 'make dtbs_check' warning(s): > > sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000: > '#clock-cells' is a required property > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++----- > 1 file changed, 3 insertions(+), 5 deletions(-) > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ phy@1c07000: 'lanes@1c06000' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm/boot/dts/qcom-sdx55-mtp.dtb arch/arm/boot/dts/qcom-sdx55-t55.dtb arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dtb phy@1c0e000: 'lanes@1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sc7280-crd.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dtb arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dtb arch/arm64/boot/dts/qcom/sc7280-idp2.dtb arch/arm64/boot/dts/qcom/sc7280-idp.dtb phy@1d87000: 'lanes@1d87400', 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8450-hdk.dtb arch/arm64/boot/dts/qcom/sm8450-qrd.dtb phy@1d87000: 'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dtb phy@627000: 'vdda-phy-max-microamp', 'vdda-pll-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dtb arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dtb phy-wrapper@88e9000: 'vdda-phy-supply' is a required property arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dtb arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dtb phy-wrapper@88e9000: 'vdda-pll-supply' is a required property arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dtb arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dtb ssphy@78000: '#clock-cells', 'lane@78200' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb
On Mon 18 Apr 13:55 PDT 2022, Bhupesh Sharma wrote: > '#clock-cells' is not a required property for qmp-phy(s) in the > '/' node, but it should be is used in 'phy@' subnode (where it is > actually a 'required' property). Fix the same. > It's not that #clock-cells is "not a required property", it's that the clock comes out of the phy (the child node), so there is no clocks provided by the parent device. Please rewrite the commit message. > This also fixes the following 'make dtbs_check' warning(s): > > sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000: > '#clock-cells' is a required property > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Vinod Koul <vkoul@kernel.org> > Cc: Rob Herring <robh+dt@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++----- > 1 file changed, 3 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > index 8b850c5ab116..c39ead81ecd7 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > @@ -66,9 +66,6 @@ properties: > - description: Address and length of PHY's common serdes block. > - description: Address and length of PHY's DP_COM control block. > > - "#clock-cells": > - enum: [ 1, 2 ] > - > "#address-cells": > enum: [ 1, 2 ] > > @@ -112,11 +109,13 @@ patternProperties: > description: > Each device node of QMP phy is required to have as many child nodes as > the number of lanes the PHY has. > + properties: > + "#clock-cells": > + enum: [ 0, 1, 2 ] The commit message doesn't mention the fact that 0 is also a valid value. Perhaps just keep it [1, 2] in this patch? Regards, Bjorn > > required: > - compatible > - reg > - - "#clock-cells" > - "#address-cells" > - "#size-cells" > - ranges > @@ -468,7 +467,6 @@ examples: > usb_2_qmpphy: phy-wrapper@88eb000 { > compatible = "qcom,sdm845-qmp-usb3-uni-phy"; > reg = <0x088eb000 0x18c>; > - #clock-cells = <1>; > #address-cells = <1>; > #size-cells = <1>; > ranges = <0x0 0x088eb000 0x2000>; > -- > 2.35.1 >
Hi Bjorn, On Sat, 23 Apr 2022 at 21:14, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Mon 18 Apr 13:55 PDT 2022, Bhupesh Sharma wrote: > > > '#clock-cells' is not a required property for qmp-phy(s) in the > > '/' node, but it should be is used in 'phy@' subnode (where it is > > actually a 'required' property). Fix the same. > > > > It's not that #clock-cells is "not a required property", it's that the > clock comes out of the phy (the child node), so there is no clocks > provided by the parent device. > > > Please rewrite the commit message. Ok. > > This also fixes the following 'make dtbs_check' warning(s): > > > > sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000: > > '#clock-cells' is a required property > > > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Vinod Koul <vkoul@kernel.org> > > Cc: Rob Herring <robh+dt@kernel.org> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++----- > > 1 file changed, 3 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > > index 8b850c5ab116..c39ead81ecd7 100644 > > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > > @@ -66,9 +66,6 @@ properties: > > - description: Address and length of PHY's common serdes block. > > - description: Address and length of PHY's DP_COM control block. > > > > - "#clock-cells": > > - enum: [ 1, 2 ] > > - > > "#address-cells": > > enum: [ 1, 2 ] > > > > @@ -112,11 +109,13 @@ patternProperties: > > description: > > Each device node of QMP phy is required to have as many child nodes as > > the number of lanes the PHY has. > > + properties: > > + "#clock-cells": > > + enum: [ 0, 1, 2 ] > > The commit message doesn't mention the fact that 0 is also a valid > value. Perhaps just keep it [1, 2] in this patch? 0 is a valid value as mentioned in the example inside the dt-binding example itself. For e.g. see the 'sdm845-qmp-pcie-phy' node: pcie0_phy: phy@1c06000 { compatible = "qcom,sdm845-qmp-pcie-phy"; <..snip..> pcie0_lane: phy@1c06200 { <..snip..> #clock-cells = <0>; So, without [ 0, 1, 2 ] in the yaml bindings we get the following error while running '$ make dt_binding_check' : qcom,qmp-phy.example.dtb: phy-wrapper@88eb000: phy@200:#clock-cells:0:0: 0 is not one of [1, 2] Thanks, Bhupesh > > > > required: > > - compatible > > - reg > > - - "#clock-cells" > > - "#address-cells" > > - "#size-cells" > > - ranges > > @@ -468,7 +467,6 @@ examples: > > usb_2_qmpphy: phy-wrapper@88eb000 { > > compatible = "qcom,sdm845-qmp-usb3-uni-phy"; > > reg = <0x088eb000 0x18c>; > > - #clock-cells = <1>; > > #address-cells = <1>; > > #size-cells = <1>; > > ranges = <0x0 0x088eb000 0x2000>; > > -- > > 2.35.1 > >
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml index 8b850c5ab116..c39ead81ecd7 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml @@ -66,9 +66,6 @@ properties: - description: Address and length of PHY's common serdes block. - description: Address and length of PHY's DP_COM control block. - "#clock-cells": - enum: [ 1, 2 ] - "#address-cells": enum: [ 1, 2 ] @@ -112,11 +109,13 @@ patternProperties: description: Each device node of QMP phy is required to have as many child nodes as the number of lanes the PHY has. + properties: + "#clock-cells": + enum: [ 0, 1, 2 ] required: - compatible - reg - - "#clock-cells" - "#address-cells" - "#size-cells" - ranges @@ -468,7 +467,6 @@ examples: usb_2_qmpphy: phy-wrapper@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; reg = <0x088eb000 0x18c>; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x088eb000 0x2000>;
'#clock-cells' is not a required property for qmp-phy(s) in the '/' node, but it should be is used in 'phy@' subnode (where it is actually a 'required' property). Fix the same. This also fixes the following 'make dtbs_check' warning(s): sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000: '#clock-cells' is a required property Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)