diff mbox series

[v4,2/4] ARM: dts: qcom: mdm9615: Use generic node name for DMA

Message ID 20220421171809.32722-3-singh.kuldeep87k@gmail.com (mailing list archive)
State Superseded
Headers show
Series [v4,1/4] ARM: dts: qcom: apq8064: Use generic node name for DMA | expand

Commit Message

Kuldeep Singh April 21, 2022, 5:18 p.m. UTC 
Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 4d4f37cebf21..8f0752ce1c7b 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -330,7 +330,7 @@  pmicgpio: gpio@150 {
 			};
 		};
 
-		sdcc1bam: dma@12182000{
+		sdcc1bam: dma-controller@12182000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -340,7 +340,7 @@  sdcc1bam: dma@12182000{
 			qcom,ee = <0>;
 		};
 
-		sdcc2bam: dma@12142000{
+		sdcc2bam: dma-controller@12142000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12142000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;