diff mbox series

[v4,2/8] dt-bindings: pci/qcom,pcie: resets are not defined for msm8996

Message ID 20220428114113.3411536-3-dmitry.baryshkov@linaro.org (mailing list archive)
State Superseded
Headers show
Series dt-bindings: YAMLify pci/qcom,pcie schema | expand

Commit Message

Dmitry Baryshkov April 28, 2022, 11:41 a.m. UTC
On MSM8996/APQ8096 platforms the PCIe controller doesn't have any
resets. So move the requirement stance under the corresponding if
condition.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie.yaml         | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

Comments

Bjorn Helgaas April 28, 2022, 2:35 p.m. UTC | #1
Unlike the other patches in this series, this subject line mentions a
problem (actually, I don't even know whether it's a *problem* or just
a statement of fact), but doesn't say what this patch does.

Based on the patch, I guess this does something like:

  Require resets except for MSM8996/APQ8096

I don't know whether you're changing the prefix convention for this
file, or just didn't look to see how it was done in the past, but it's
nice to have some consistency:

  $ git log --oneline Documentation/devicetree/bindings/pci/qcom,pcie.txt
  f52d2a0f0d32 dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
  dddb4efa5192 dt-bindings: pci: qcom: Document PCIe bindings for SM8450
  45a3ec891370 PCI: qcom: Add sc8180x compatible
  320e10986ef7 dt-bindings: PCI: update references to Designware schema
  9f7368ff1210 dt-bindings: pci: qcom: Document PCIe bindings for IPQ6018 SoC
  c9f04600026f dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
  458168247ccc dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
  d511580ea9c2 dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant
  b11b8cc161de dt-bindings: PCI: qcom: Add ext reset
  736ae5c91712 dt-bindings: PCI: qcom: Add missing clks
  5d28bee7c91e dt-bindings: PCI: qcom: Add support for SDM845 PCIe
  29a50257a9d6 dt-bindings: PCI: qcom: Add QCS404 to the binding
  f625b1ade245 PCI: qcom: Add missing supplies required for msm8996
  8baf0151cd4b dt-bindings: PCI: qcom: Add support for IPQ8074
  90d52d57ccac PCI: qcom: Add support for IPQ4019 PCIe controller
  d0491fc39bdd PCI: qcom: Add support for MSM8996 PCIe controller
  845d5ca26647 PCI: qcom: Document PCIe devicetree bindings

Including both "pci" and "pcie" in the prefix seems like overkill.

On Thu, Apr 28, 2022 at 02:41:07PM +0300, Dmitry Baryshkov wrote:
> On MSM8996/APQ8096 platforms the PCIe controller doesn't have any
> resets. So move the requirement stance under the corresponding if
> condition.

s/stance/stanza/

> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  .../devicetree/bindings/pci/qcom,pcie.yaml         | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> index 16f765e96128..ce4f53cdaba0 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -114,8 +114,6 @@ required:
>    - interrupt-map
>    - clocks
>    - clock-names
> -  - resets
> -  - reset-names
>  
>  allOf:
>    - $ref: /schemas/pci/pci-bus.yaml#
> @@ -504,6 +502,18 @@ allOf:
>        required:
>          - power-domains
>  
> +  - if:
> +      not:
> +        properties:
> +          compatibles:
> +            contains:
> +              enum:
> +                - qcom,pcie-msm8996
> +    then:
> +      required:
> +        - resets
> +        - reset-names
> +
>  unevaluatedProperties: false
>  
>  examples:
> -- 
> 2.35.1
>
Dmitry Baryshkov April 29, 2022, 8:02 p.m. UTC | #2
On 28/04/2022 17:35, Bjorn Helgaas wrote:
> Unlike the other patches in this series, this subject line mentions a
> problem (actually, I don't even know whether it's a *problem* or just
> a statement of fact), but doesn't say what this patch does.
> 
> Based on the patch, I guess this does something like:
> 
>    Require resets except for MSM8996/APQ8096

Ack

> 
> I don't know whether you're changing the prefix convention for this
> file, or just didn't look to see how it was done in the past, but it's
> nice to have some consistency:


Ack

> 
>    $ git log --oneline Documentation/devicetree/bindings/pci/qcom,pcie.txt
>    f52d2a0f0d32 dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
>    dddb4efa5192 dt-bindings: pci: qcom: Document PCIe bindings for SM8450
>    45a3ec891370 PCI: qcom: Add sc8180x compatible
>    320e10986ef7 dt-bindings: PCI: update references to Designware schema
>    9f7368ff1210 dt-bindings: pci: qcom: Document PCIe bindings for IPQ6018 SoC
>    c9f04600026f dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250
>    458168247ccc dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC
>    d511580ea9c2 dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant
>    b11b8cc161de dt-bindings: PCI: qcom: Add ext reset
>    736ae5c91712 dt-bindings: PCI: qcom: Add missing clks
>    5d28bee7c91e dt-bindings: PCI: qcom: Add support for SDM845 PCIe
>    29a50257a9d6 dt-bindings: PCI: qcom: Add QCS404 to the binding
>    f625b1ade245 PCI: qcom: Add missing supplies required for msm8996
>    8baf0151cd4b dt-bindings: PCI: qcom: Add support for IPQ8074
>    90d52d57ccac PCI: qcom: Add support for IPQ4019 PCIe controller
>    d0491fc39bdd PCI: qcom: Add support for MSM8996 PCIe controller
>    845d5ca26647 PCI: qcom: Document PCIe devicetree bindings
> 
> Including both "pci" and "pcie" in the prefix seems like overkill.
> 
> On Thu, Apr 28, 2022 at 02:41:07PM +0300, Dmitry Baryshkov wrote:
>> On MSM8996/APQ8096 platforms the PCIe controller doesn't have any
>> resets. So move the requirement stance under the corresponding if
>> condition.
> 
> s/stance/stanza/
> 
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>> ---
>>   .../devicetree/bindings/pci/qcom,pcie.yaml         | 14 ++++++++++++--
>>   1 file changed, 12 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>> index 16f765e96128..ce4f53cdaba0 100644
>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
>> @@ -114,8 +114,6 @@ required:
>>     - interrupt-map
>>     - clocks
>>     - clock-names
>> -  - resets
>> -  - reset-names
>>   
>>   allOf:
>>     - $ref: /schemas/pci/pci-bus.yaml#
>> @@ -504,6 +502,18 @@ allOf:
>>         required:
>>           - power-domains
>>   
>> +  - if:
>> +      not:
>> +        properties:
>> +          compatibles:
>> +            contains:
>> +              enum:
>> +                - qcom,pcie-msm8996
>> +    then:
>> +      required:
>> +        - resets
>> +        - reset-names
>> +
>>   unevaluatedProperties: false
>>   
>>   examples:
>> -- 
>> 2.35.1
>>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 16f765e96128..ce4f53cdaba0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -114,8 +114,6 @@  required:
   - interrupt-map
   - clocks
   - clock-names
-  - resets
-  - reset-names
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
@@ -504,6 +502,18 @@  allOf:
       required:
         - power-domains
 
+  - if:
+      not:
+        properties:
+          compatibles:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
 unevaluatedProperties: false
 
 examples: