| Message ID | 20220429214420.854335-3-bhupesh.sharma@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: qcom: Fix 'sdhci' nodes for 'make dtbs_check' | expand |
On Fri 29 Apr 16:44 CDT 2022, Bhupesh Sharma wrote: > Since the Qualcomm sdhci-msm device-tree binding has been converted > to yaml format, 'make dtbs_check' reports a number of issues with > node names for sdhci 'opp-table' nodes, as it doesn't seem to like > any 'preceding text or numbers' before 'opp-table' pattern in the > node names. > > Fix the same. > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > Cc: Rob Herring <robh@kernel.org> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > --- > arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- > arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +- > arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- > 4 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > index 86175d257b1e..b6df3186e94c 100644 > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > @@ -725,7 +725,7 @@ sdhc_1: sdhci@7c4000 { > > status = "disabled"; > > - sdhc1_opp_table: sdhc1-opp-table { > + sdhc1_opp_table: opp-table-sdhc1 { There's only a single opp-table child node of &sdhc_1, so I would prefer that these would just be: sdhc1_opp_table: opp-table { Like what you did in the sm8150 and sm8250 case below. Can you please update this accordingly? Thanks, Bjorn > compatible = "operating-points-v2"; > > opp-100000000 { > @@ -2609,7 +2609,7 @@ sdhc_2: sdhci@8804000 { > > status = "disabled"; > > - sdhc2_opp_table: sdhc2-opp-table { > + sdhc2_opp_table: opp-table-sdhc2 { > compatible = "operating-points-v2"; > > opp-100000000 { > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi > index fb1a0f662575..87a5d72b2ca0 100644 > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi > @@ -497,7 +497,7 @@ sdhc_1: sdhci@7c4000 { > > status = "disabled"; > > - sdhc1_opp_table: sdhc1-opp-table { > + sdhc1_opp_table: opp-table-sdhc1 { > compatible = "operating-points-v2"; > > opp-19200000 { > @@ -941,7 +941,7 @@ sdhc_2: sdhci@8804000 { > > status = "disabled"; > > - sdhc2_opp_table: sdhc2-opp-table { > + sdhc2_opp_table: opp-table-sdhc2 { > compatible = "operating-points-v2"; > > opp-100000000 { > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > index 2700a8145cb9..e265d61f7c05 100644 > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > @@ -3563,7 +3563,7 @@ sdhc_2: sdhci@8804000 { > > status = "disabled"; > > - sdhc2_opp_table: sdhc2-opp-table { > + sdhc2_opp_table: opp-table { > compatible = "operating-points-v2"; > > opp-19200000 { > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > index dc2562070336..5ca16f76ddeb 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > @@ -2937,7 +2937,7 @@ sdhc_2: sdhci@8804000 { > > status = "disabled"; > > - sdhc2_opp_table: sdhc2-opp-table { > + sdhc2_opp_table: opp-table { > compatible = "operating-points-v2"; > > opp-19200000 { > -- > 2.35.1 >
Hi Bjorn, On Fri, 6 May 2022 at 08:46, Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Fri 29 Apr 16:44 CDT 2022, Bhupesh Sharma wrote: > > > Since the Qualcomm sdhci-msm device-tree binding has been converted > > to yaml format, 'make dtbs_check' reports a number of issues with > > node names for sdhci 'opp-table' nodes, as it doesn't seem to like > > any 'preceding text or numbers' before 'opp-table' pattern in the > > node names. > > > > Fix the same. > > > > Cc: Bjorn Andersson <bjorn.andersson@linaro.org> > > Cc: Rob Herring <robh@kernel.org> > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++-- > > arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- > > arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +- > > arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- > > 4 files changed, 6 insertions(+), 6 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi > > index 86175d257b1e..b6df3186e94c 100644 > > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi > > @@ -725,7 +725,7 @@ sdhc_1: sdhci@7c4000 { > > > > status = "disabled"; > > > > - sdhc1_opp_table: sdhc1-opp-table { > > + sdhc1_opp_table: opp-table-sdhc1 { > > There's only a single opp-table child node of &sdhc_1, so I would prefer > that these would just be: > > sdhc1_opp_table: opp-table { > > Like what you did in the sm8150 and sm8250 case below. > > Can you please update this accordingly? Sure, let me fix these in v2. Thanks, Bhupesh > > > compatible = "operating-points-v2"; > > > > opp-100000000 { > > @@ -2609,7 +2609,7 @@ sdhc_2: sdhci@8804000 { > > > > status = "disabled"; > > > > - sdhc2_opp_table: sdhc2-opp-table { > > + sdhc2_opp_table: opp-table-sdhc2 { > > compatible = "operating-points-v2"; > > > > opp-100000000 { > > diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi > > index fb1a0f662575..87a5d72b2ca0 100644 > > --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi > > @@ -497,7 +497,7 @@ sdhc_1: sdhci@7c4000 { > > > > status = "disabled"; > > > > - sdhc1_opp_table: sdhc1-opp-table { > > + sdhc1_opp_table: opp-table-sdhc1 { > > compatible = "operating-points-v2"; > > > > opp-19200000 { > > @@ -941,7 +941,7 @@ sdhc_2: sdhci@8804000 { > > > > status = "disabled"; > > > > - sdhc2_opp_table: sdhc2-opp-table { > > + sdhc2_opp_table: opp-table-sdhc2 { > > compatible = "operating-points-v2"; > > > > opp-100000000 { > > diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi > > index 2700a8145cb9..e265d61f7c05 100644 > > --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi > > @@ -3563,7 +3563,7 @@ sdhc_2: sdhci@8804000 { > > > > status = "disabled"; > > > > - sdhc2_opp_table: sdhc2-opp-table { > > + sdhc2_opp_table: opp-table { > > compatible = "operating-points-v2"; > > > > opp-19200000 { > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi > > index dc2562070336..5ca16f76ddeb 100644 > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi > > @@ -2937,7 +2937,7 @@ sdhc_2: sdhci@8804000 { > > > > status = "disabled"; > > > > - sdhc2_opp_table: sdhc2-opp-table { > > + sdhc2_opp_table: opp-table { > > compatible = "operating-points-v2"; > > > > opp-19200000 { > > -- > > 2.35.1 > >
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 86175d257b1e..b6df3186e94c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -725,7 +725,7 @@ sdhc_1: sdhci@7c4000 { status = "disabled"; - sdhc1_opp_table: sdhc1-opp-table { + sdhc1_opp_table: opp-table-sdhc1 { compatible = "operating-points-v2"; opp-100000000 { @@ -2609,7 +2609,7 @@ sdhc_2: sdhci@8804000 { status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table-sdhc2 { compatible = "operating-points-v2"; opp-100000000 { diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index fb1a0f662575..87a5d72b2ca0 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -497,7 +497,7 @@ sdhc_1: sdhci@7c4000 { status = "disabled"; - sdhc1_opp_table: sdhc1-opp-table { + sdhc1_opp_table: opp-table-sdhc1 { compatible = "operating-points-v2"; opp-19200000 { @@ -941,7 +941,7 @@ sdhc_2: sdhci@8804000 { status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table-sdhc2 { compatible = "operating-points-v2"; opp-100000000 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 2700a8145cb9..e265d61f7c05 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -3563,7 +3563,7 @@ sdhc_2: sdhci@8804000 { status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index dc2562070336..5ca16f76ddeb 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2937,7 +2937,7 @@ sdhc_2: sdhci@8804000 { status = "disabled"; - sdhc2_opp_table: sdhc2-opp-table { + sdhc2_opp_table: opp-table { compatible = "operating-points-v2"; opp-19200000 {
Since the Qualcomm sdhci-msm device-tree binding has been converted to yaml format, 'make dtbs_check' reports a number of issues with node names for sdhci 'opp-table' nodes, as it doesn't seem to like any 'preceding text or numbers' before 'opp-table' pattern in the node names. Fix the same. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-)