diff mbox series

[3/4] arm64: dts: qcom: pmi8994: Define MPP block

Message ID 20220505022706.1692554-4-bjorn.andersson@linaro.org (mailing list archive)
State Accepted
Commit f041bb3cd77fb68b59cbec8031bfe65eeff15823
Headers show
Series arm64: dts: qcom: Add a few LPG LEDs | expand

Commit Message

Bjorn Andersson May 5, 2022, 2:27 a.m. UTC 
The pmi8994 has 4 multi-purpose-pins, add these to the definition.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/pmi8994.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Dmitry Baryshkov July 4, 2022, 4:33 p.m. UTC | #1 
On 05/05/2022 05:27, Bjorn Andersson wrote:
> The pmi8994 has 4 multi-purpose-pins, add these to the definition.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   arch/arm64/boot/dts/qcom/pmi8994.dtsi | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
> index b1b50c99ada2..0dfdd42f6f55 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
> @@ -19,6 +19,16 @@ pmi8994_gpios: gpios@c000 {
>   			interrupt-controller;
>   			#interrupt-cells = <2>;
>   		};
> +
> +		pmi8994_mpps: mpps@a000 {
> +			compatible = "qcom,pmi8994-mpp";
> +			reg = <0xa000>;
> +			gpio-controller;
> +			gpio-ranges = <&pmi8994_mpps 0 0 4>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
>   	};
>   
>   	pmic@3 {
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmi8994.dtsi b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
index b1b50c99ada2..0dfdd42f6f55 100644
--- a/arch/arm64/boot/dts/qcom/pmi8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8994.dtsi
@@ -19,6 +19,16 @@  pmi8994_gpios: gpios@c000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pmi8994_mpps: mpps@a000 {
+			compatible = "qcom,pmi8994-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			gpio-ranges = <&pmi8994_mpps 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pmic@3 {