diff mbox series

[v3,1/2] drm/probe-helper: Add helper for drm_helper_probe_single_connector_modes()

Message ID 20220511155749.v3.1.I2dd93486c6952bd52f2020904de0133970d11b29@changeid (mailing list archive)
State Not Applicable
Headers show
Series [v3,1/2] drm/probe-helper: Add helper for drm_helper_probe_single_connector_modes() | expand

Commit Message

Doug Anderson May 11, 2022, 10:58 p.m. UTC
The drm_helper_probe_single_connector_modes() is a bit long. Let's
break a chunk off to update and validate modes. This helps avoid one
goto and also will allow us to more easily call the helper a second
time in a future patch without adding looping or another goto.

This change is intended to be a no-op change--just code movement.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
---

Changes in v3:
- Removed WARN_ON

Changes in v2:
- Two underscores for __drm_helper_update_and_validate().
- Return err and use WARN_ON instead of returning a bool.

 drivers/gpu/drm/drm_probe_helper.c | 106 ++++++++++++++++-------------
 1 file changed, 60 insertions(+), 46 deletions(-)

Comments

Doug Anderson May 20, 2022, 12:20 a.m. UTC | #1
Hi,

On Wed, May 11, 2022 at 3:58 PM Douglas Anderson <dianders@chromium.org> wrote:
>
> The drm_helper_probe_single_connector_modes() is a bit long. Let's
> break a chunk off to update and validate modes. This helps avoid one
> goto and also will allow us to more easily call the helper a second
> time in a future patch without adding looping or another goto.
>
> This change is intended to be a no-op change--just code movement.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
> ---
>
> Changes in v3:
> - Removed WARN_ON
>
> Changes in v2:
> - Two underscores for __drm_helper_update_and_validate().
> - Return err and use WARN_ON instead of returning a bool.
>
>  drivers/gpu/drm/drm_probe_helper.c | 106 ++++++++++++++++-------------
>  1 file changed, 60 insertions(+), 46 deletions(-)

Pushed to drm-misc-next:

4a2a13a57b60 drm/probe-helper: Add helper for
drm_helper_probe_single_connector_modes()
Dmitry Baryshkov June 1, 2022, 8:36 p.m. UTC | #2
On 12/05/2022 01:58, Douglas Anderson wrote:
> The drm_helper_probe_single_connector_modes() is a bit long. Let's
> break a chunk off to update and validate modes. This helps avoid one
> goto and also will allow us to more easily call the helper a second
> time in a future patch without adding looping or another goto.
> 
> This change is intended to be a no-op change--just code movement.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
> 
> Changes in v3:
> - Removed WARN_ON
> 
> Changes in v2:
> - Two underscores for __drm_helper_update_and_validate().
> - Return err and use WARN_ON instead of returning a bool.
> 
>   drivers/gpu/drm/drm_probe_helper.c | 106 ++++++++++++++++-------------
>   1 file changed, 60 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
> index 682359512996..2570d47e7eab 100644
> --- a/drivers/gpu/drm/drm_probe_helper.c
> +++ b/drivers/gpu/drm/drm_probe_helper.c
> @@ -354,6 +354,61 @@ drm_helper_probe_detect(struct drm_connector *connector,
>   }
>   EXPORT_SYMBOL(drm_helper_probe_detect);
>   
> +static int __drm_helper_update_and_validate(struct drm_connector *connector,
> +					    uint32_t maxX, uint32_t maxY,
> +					    struct drm_modeset_acquire_ctx *ctx)
> +{
> +	struct drm_device *dev = connector->dev;
> +	struct drm_display_mode *mode;
> +	int mode_flags = 0;
> +	int ret;
> +
> +	drm_connector_list_update(connector);
> +
> +	if (connector->interlace_allowed)
> +		mode_flags |= DRM_MODE_FLAG_INTERLACE;
> +	if (connector->doublescan_allowed)
> +		mode_flags |= DRM_MODE_FLAG_DBLSCAN;
> +	if (connector->stereo_allowed)
> +		mode_flags |= DRM_MODE_FLAG_3D_MASK;
> +
> +	list_for_each_entry(mode, &connector->modes, head) {
> +		if (mode->status != MODE_OK)
> +			continue;
> +
> +		mode->status = drm_mode_validate_driver(dev, mode);
> +		if (mode->status != MODE_OK)
> +			continue;
> +
> +		mode->status = drm_mode_validate_size(mode, maxX, maxY);
> +		if (mode->status != MODE_OK)
> +			continue;
> +
> +		mode->status = drm_mode_validate_flag(mode, mode_flags);
> +		if (mode->status != MODE_OK)
> +			continue;
> +
> +		ret = drm_mode_validate_pipeline(mode, connector, ctx,
> +						 &mode->status);
> +		if (ret) {
> +			drm_dbg_kms(dev,
> +				    "drm_mode_validate_pipeline failed: %d\n",
> +				    ret);
> +
> +			if (drm_WARN_ON_ONCE(dev, ret != -EDEADLK))
> +				mode->status = MODE_ERROR;
> +			else
> +				return -EDEADLK;
> +		}
> +
> +		if (mode->status != MODE_OK)
> +			continue;
> +		mode->status = drm_mode_validate_ycbcr420(mode, connector);
> +	}
> +
> +	return 0;
> +}
> +
>   /**
>    * drm_helper_probe_single_connector_modes - get complete set of display modes
>    * @connector: connector to probe
> @@ -421,7 +476,6 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>   	const struct drm_connector_helper_funcs *connector_funcs =
>   		connector->helper_private;
>   	int count = 0, ret;
> -	int mode_flags = 0;
>   	bool verbose_prune = true;
>   	enum drm_connector_status old_status;
>   	struct drm_modeset_acquire_ctx ctx;
> @@ -519,52 +573,12 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
>   			   connector->status == connector_status_unknown))
>   		count = drm_add_modes_noedid(connector, 1024, 768);
>   	count += drm_helper_probe_add_cmdline_mode(connector);
> -	if (count == 0)
> -		goto prune;
> -
> -	drm_connector_list_update(connector);
> -
> -	if (connector->interlace_allowed)
> -		mode_flags |= DRM_MODE_FLAG_INTERLACE;
> -	if (connector->doublescan_allowed)
> -		mode_flags |= DRM_MODE_FLAG_DBLSCAN;
> -	if (connector->stereo_allowed)
> -		mode_flags |= DRM_MODE_FLAG_3D_MASK;
> -
> -	list_for_each_entry(mode, &connector->modes, head) {
> -		if (mode->status != MODE_OK)
> -			continue;
> -
> -		mode->status = drm_mode_validate_driver(dev, mode);
> -		if (mode->status != MODE_OK)
> -			continue;
> -
> -		mode->status = drm_mode_validate_size(mode, maxX, maxY);
> -		if (mode->status != MODE_OK)
> -			continue;
> -
> -		mode->status = drm_mode_validate_flag(mode, mode_flags);
> -		if (mode->status != MODE_OK)
> -			continue;
> -
> -		ret = drm_mode_validate_pipeline(mode, connector, &ctx,
> -						 &mode->status);
> -		if (ret) {
> -			drm_dbg_kms(dev,
> -				    "drm_mode_validate_pipeline failed: %d\n",
> -				    ret);
> -
> -			if (drm_WARN_ON_ONCE(dev, ret != -EDEADLK)) {
> -				mode->status = MODE_ERROR;
> -			} else {
> -				drm_modeset_backoff(&ctx);
> -				goto retry;
> -			}
> +	if (count != 0) {
> +		ret = __drm_helper_update_and_validate(connector, maxX, maxY, &ctx);
> +		if (ret == -EDEADLK) {
> +			drm_modeset_backoff(&ctx);
> +			goto retry;
>   		}
> -
> -		if (mode->status != MODE_OK)
> -			continue;
> -		mode->status = drm_mode_validate_ycbcr420(mode, connector);
>   	}
>   
>   prune:
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c
index 682359512996..2570d47e7eab 100644
--- a/drivers/gpu/drm/drm_probe_helper.c
+++ b/drivers/gpu/drm/drm_probe_helper.c
@@ -354,6 +354,61 @@  drm_helper_probe_detect(struct drm_connector *connector,
 }
 EXPORT_SYMBOL(drm_helper_probe_detect);
 
+static int __drm_helper_update_and_validate(struct drm_connector *connector,
+					    uint32_t maxX, uint32_t maxY,
+					    struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_display_mode *mode;
+	int mode_flags = 0;
+	int ret;
+
+	drm_connector_list_update(connector);
+
+	if (connector->interlace_allowed)
+		mode_flags |= DRM_MODE_FLAG_INTERLACE;
+	if (connector->doublescan_allowed)
+		mode_flags |= DRM_MODE_FLAG_DBLSCAN;
+	if (connector->stereo_allowed)
+		mode_flags |= DRM_MODE_FLAG_3D_MASK;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		if (mode->status != MODE_OK)
+			continue;
+
+		mode->status = drm_mode_validate_driver(dev, mode);
+		if (mode->status != MODE_OK)
+			continue;
+
+		mode->status = drm_mode_validate_size(mode, maxX, maxY);
+		if (mode->status != MODE_OK)
+			continue;
+
+		mode->status = drm_mode_validate_flag(mode, mode_flags);
+		if (mode->status != MODE_OK)
+			continue;
+
+		ret = drm_mode_validate_pipeline(mode, connector, ctx,
+						 &mode->status);
+		if (ret) {
+			drm_dbg_kms(dev,
+				    "drm_mode_validate_pipeline failed: %d\n",
+				    ret);
+
+			if (drm_WARN_ON_ONCE(dev, ret != -EDEADLK))
+				mode->status = MODE_ERROR;
+			else
+				return -EDEADLK;
+		}
+
+		if (mode->status != MODE_OK)
+			continue;
+		mode->status = drm_mode_validate_ycbcr420(mode, connector);
+	}
+
+	return 0;
+}
+
 /**
  * drm_helper_probe_single_connector_modes - get complete set of display modes
  * @connector: connector to probe
@@ -421,7 +476,6 @@  int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 	const struct drm_connector_helper_funcs *connector_funcs =
 		connector->helper_private;
 	int count = 0, ret;
-	int mode_flags = 0;
 	bool verbose_prune = true;
 	enum drm_connector_status old_status;
 	struct drm_modeset_acquire_ctx ctx;
@@ -519,52 +573,12 @@  int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 			   connector->status == connector_status_unknown))
 		count = drm_add_modes_noedid(connector, 1024, 768);
 	count += drm_helper_probe_add_cmdline_mode(connector);
-	if (count == 0)
-		goto prune;
-
-	drm_connector_list_update(connector);
-
-	if (connector->interlace_allowed)
-		mode_flags |= DRM_MODE_FLAG_INTERLACE;
-	if (connector->doublescan_allowed)
-		mode_flags |= DRM_MODE_FLAG_DBLSCAN;
-	if (connector->stereo_allowed)
-		mode_flags |= DRM_MODE_FLAG_3D_MASK;
-
-	list_for_each_entry(mode, &connector->modes, head) {
-		if (mode->status != MODE_OK)
-			continue;
-
-		mode->status = drm_mode_validate_driver(dev, mode);
-		if (mode->status != MODE_OK)
-			continue;
-
-		mode->status = drm_mode_validate_size(mode, maxX, maxY);
-		if (mode->status != MODE_OK)
-			continue;
-
-		mode->status = drm_mode_validate_flag(mode, mode_flags);
-		if (mode->status != MODE_OK)
-			continue;
-
-		ret = drm_mode_validate_pipeline(mode, connector, &ctx,
-						 &mode->status);
-		if (ret) {
-			drm_dbg_kms(dev,
-				    "drm_mode_validate_pipeline failed: %d\n",
-				    ret);
-
-			if (drm_WARN_ON_ONCE(dev, ret != -EDEADLK)) {
-				mode->status = MODE_ERROR;
-			} else {
-				drm_modeset_backoff(&ctx);
-				goto retry;
-			}
+	if (count != 0) {
+		ret = __drm_helper_update_and_validate(connector, maxX, maxY, &ctx);
+		if (ret == -EDEADLK) {
+			drm_modeset_backoff(&ctx);
+			goto retry;
 		}
-
-		if (mode->status != MODE_OK)
-			continue;
-		mode->status = drm_mode_validate_ycbcr420(mode, connector);
 	}
 
 prune: