| Message ID | 20220523171847.21929-1-quic_saipraka@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | iommu/arm-smmu-qcom: Add debug support for TLB sync timeouts | expand |
On 5/23/2022 10:48 PM, Sai Prakash Ranjan wrote: > TLB sync timeouts can be due to various reasons such as TBU power down > or pending TCU/TBU invalidation/sync and so on. Debugging these often > require dumping of some implementation defined registers to know the > status of TBU/TCU operations and some of these registers are not > accessible in non-secure world such as from kernel and requires SMC > calls to read them in the secure world. So, add this debug support > to dump implementation defined registers for TLB sync timeout issues. > > Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> > --- > drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 50 ++++++++++++++++++++++ > drivers/iommu/arm/arm-smmu/arm-smmu.c | 2 + > drivers/iommu/arm/arm-smmu/arm-smmu.h | 4 ++ > 3 files changed, 56 insertions(+) > > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > index 7820711c4560..22e9a0085475 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c > @@ -5,11 +5,19 @@ > > #include <linux/acpi.h> > #include <linux/adreno-smmu-priv.h> > +#include <linux/delay.h> > #include <linux/of_device.h> > #include <linux/qcom_scm.h> > > #include "arm-smmu.h" > > +#define QCOM_DUMMY_VAL -1 > + > +/* Implementation Defined Register Space 0 registers */ > +#define QCOM_SMMU_STATS_SYNC_INV_TBU_ACK 0x5dc > +#define QCOM_SMMU_TBU_PWR_STATUS 0x2204 > +#define QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR 0x2670 > + > struct qcom_smmu { > struct arm_smmu_device smmu; > bool bypass_quirk; > @@ -22,6 +30,46 @@ static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) > return container_of(smmu, struct qcom_smmu, smmu); > } > > +static void qcom_smmu_tlb_sync(struct arm_smmu_device *smmu, int page, > + int sync, int status) > +{ > + u32 sync_inv_ack, sync_inv_progress, tbu_pwr_status; > + unsigned int spin_cnt, delay; > + u32 reg; > + int ret; > + > + arm_smmu_writel(smmu, page, sync, QCOM_DUMMY_VAL); > + for (delay = 1; delay < TLB_LOOP_TIMEOUT; delay *= 2) { > + for (spin_cnt = TLB_SPIN_COUNT; spin_cnt > 0; spin_cnt--) { > + reg = arm_smmu_readl(smmu, page, status); > + if (!(reg & ARM_SMMU_sTLBGSTATUS_GSACTIVE)) > + return; > + cpu_relax(); > + } > + udelay(delay); > + } > + > + sync_inv_ack = arm_smmu_readl(smmu, ARM_SMMU_IMPL_DEF0, > + QCOM_SMMU_STATS_SYNC_INV_TBU_ACK); Sorry, this doesn't work always, looks like on earlier chipsets this is a secure register and reading it from non-secure world would probably blow. Also this register can be in other implementation defined space for different chipsets. So I think we can use SCM call here and have a device specific data based on already existing compatible for QCOM SoCs to identify IMP_DEF space used. > + ret = qcom_scm_io_readl(smmu->ioaddr + QCOM_SMMU_TBU_PWR_STATUS, > + &tbu_pwr_status); > + if (ret) > + dev_err_ratelimited(smmu->dev, > + "Failed to read TBU power status: %d\n", ret); > + > + ret = qcom_scm_io_readl(smmu->ioaddr + QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR, > + &sync_inv_progress); > + if (ret) > + dev_err_ratelimited(smmu->dev, > + "Failed to read SAFE WAIT counter: %d\n", ret); > + > + dev_err_ratelimited(smmu->dev, > + "TLB sync timed out -- SMMU may be deadlocked\n" > + "TBU: sync_inv_ack %#x power_status %#x sync_inv_progress %#x\n", > + sync_inv_ack, tbu_pwr_status, sync_inv_progress); > +} > + > static void qcom_adreno_smmu_write_sctlr(struct arm_smmu_device *smmu, int idx, > u32 reg) > { > @@ -374,6 +422,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = { > .def_domain_type = qcom_smmu_def_domain_type, > .reset = qcom_smmu500_reset, > .write_s2cr = qcom_smmu_write_s2cr, > + .tlb_sync = qcom_smmu_tlb_sync, > }; > > static const struct arm_smmu_impl qcom_adreno_smmu_impl = { > @@ -382,6 +431,7 @@ static const struct arm_smmu_impl qcom_adreno_smmu_impl = { > .reset = qcom_smmu500_reset, > .alloc_context_bank = qcom_adreno_smmu_alloc_context_bank, > .write_sctlr = qcom_adreno_smmu_write_sctlr, > + .tlb_sync = qcom_smmu_tlb_sync, > }; > > static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu, > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c > index 2ed3594f384e..4c5b51109835 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c > @@ -2099,6 +2099,8 @@ static int arm_smmu_device_probe(struct platform_device *pdev) > if (IS_ERR(smmu->base)) > return PTR_ERR(smmu->base); > ioaddr = res->start; > + smmu->ioaddr = ioaddr; > + > /* > * The resource size should effectively match the value of SMMU_TOP; > * stash that temporarily until we know PAGESIZE to validate it with. > diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h > index 2b9b42fb6f30..8cf6567d970f 100644 > --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h > +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h > @@ -278,6 +278,7 @@ struct arm_smmu_device { > struct device *dev; > > void __iomem *base; > + phys_addr_t ioaddr; > unsigned int numpage; > unsigned int pgshift; > > @@ -502,6 +503,9 @@ static inline void arm_smmu_writeq(struct arm_smmu_device *smmu, int page, > > #define ARM_SMMU_GR0 0 > #define ARM_SMMU_GR1 1 > + > +#define ARM_SMMU_IMPL_DEF0 2 > + > #define ARM_SMMU_CB(s, n) ((s)->numpage + (n)) > > #define arm_smmu_gr0_read(s, o) \
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index 7820711c4560..22e9a0085475 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -5,11 +5,19 @@ #include <linux/acpi.h> #include <linux/adreno-smmu-priv.h> +#include <linux/delay.h> #include <linux/of_device.h> #include <linux/qcom_scm.h> #include "arm-smmu.h" +#define QCOM_DUMMY_VAL -1 + +/* Implementation Defined Register Space 0 registers */ +#define QCOM_SMMU_STATS_SYNC_INV_TBU_ACK 0x5dc +#define QCOM_SMMU_TBU_PWR_STATUS 0x2204 +#define QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR 0x2670 + struct qcom_smmu { struct arm_smmu_device smmu; bool bypass_quirk; @@ -22,6 +30,46 @@ static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) return container_of(smmu, struct qcom_smmu, smmu); } +static void qcom_smmu_tlb_sync(struct arm_smmu_device *smmu, int page, + int sync, int status) +{ + u32 sync_inv_ack, sync_inv_progress, tbu_pwr_status; + unsigned int spin_cnt, delay; + u32 reg; + int ret; + + arm_smmu_writel(smmu, page, sync, QCOM_DUMMY_VAL); + for (delay = 1; delay < TLB_LOOP_TIMEOUT; delay *= 2) { + for (spin_cnt = TLB_SPIN_COUNT; spin_cnt > 0; spin_cnt--) { + reg = arm_smmu_readl(smmu, page, status); + if (!(reg & ARM_SMMU_sTLBGSTATUS_GSACTIVE)) + return; + cpu_relax(); + } + udelay(delay); + } + + sync_inv_ack = arm_smmu_readl(smmu, ARM_SMMU_IMPL_DEF0, + QCOM_SMMU_STATS_SYNC_INV_TBU_ACK); + + ret = qcom_scm_io_readl(smmu->ioaddr + QCOM_SMMU_TBU_PWR_STATUS, + &tbu_pwr_status); + if (ret) + dev_err_ratelimited(smmu->dev, + "Failed to read TBU power status: %d\n", ret); + + ret = qcom_scm_io_readl(smmu->ioaddr + QCOM_SMMU_MMU2QSS_AND_SAFE_WAIT_CNTR, + &sync_inv_progress); + if (ret) + dev_err_ratelimited(smmu->dev, + "Failed to read SAFE WAIT counter: %d\n", ret); + + dev_err_ratelimited(smmu->dev, + "TLB sync timed out -- SMMU may be deadlocked\n" + "TBU: sync_inv_ack %#x power_status %#x sync_inv_progress %#x\n", + sync_inv_ack, tbu_pwr_status, sync_inv_progress); +} + static void qcom_adreno_smmu_write_sctlr(struct arm_smmu_device *smmu, int idx, u32 reg) { @@ -374,6 +422,7 @@ static const struct arm_smmu_impl qcom_smmu_impl = { .def_domain_type = qcom_smmu_def_domain_type, .reset = qcom_smmu500_reset, .write_s2cr = qcom_smmu_write_s2cr, + .tlb_sync = qcom_smmu_tlb_sync, }; static const struct arm_smmu_impl qcom_adreno_smmu_impl = { @@ -382,6 +431,7 @@ static const struct arm_smmu_impl qcom_adreno_smmu_impl = { .reset = qcom_smmu500_reset, .alloc_context_bank = qcom_adreno_smmu_alloc_context_bank, .write_sctlr = qcom_adreno_smmu_write_sctlr, + .tlb_sync = qcom_smmu_tlb_sync, }; static struct arm_smmu_device *qcom_smmu_create(struct arm_smmu_device *smmu, diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.c b/drivers/iommu/arm/arm-smmu/arm-smmu.c index 2ed3594f384e..4c5b51109835 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.c @@ -2099,6 +2099,8 @@ static int arm_smmu_device_probe(struct platform_device *pdev) if (IS_ERR(smmu->base)) return PTR_ERR(smmu->base); ioaddr = res->start; + smmu->ioaddr = ioaddr; + /* * The resource size should effectively match the value of SMMU_TOP; * stash that temporarily until we know PAGESIZE to validate it with. diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h index 2b9b42fb6f30..8cf6567d970f 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu.h +++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h @@ -278,6 +278,7 @@ struct arm_smmu_device { struct device *dev; void __iomem *base; + phys_addr_t ioaddr; unsigned int numpage; unsigned int pgshift; @@ -502,6 +503,9 @@ static inline void arm_smmu_writeq(struct arm_smmu_device *smmu, int page, #define ARM_SMMU_GR0 0 #define ARM_SMMU_GR1 1 + +#define ARM_SMMU_IMPL_DEF0 2 + #define ARM_SMMU_CB(s, n) ((s)->numpage + (n)) #define arm_smmu_gr0_read(s, o) \
TLB sync timeouts can be due to various reasons such as TBU power down or pending TCU/TBU invalidation/sync and so on. Debugging these often require dumping of some implementation defined registers to know the status of TBU/TCU operations and some of these registers are not accessible in non-secure world such as from kernel and requires SMC calls to read them in the secure world. So, add this debug support to dump implementation defined registers for TLB sync timeout issues. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 50 ++++++++++++++++++++++ drivers/iommu/arm/arm-smmu/arm-smmu.c | 2 + drivers/iommu/arm/arm-smmu/arm-smmu.h | 4 ++ 3 files changed, 56 insertions(+)