From patchwork Fri Jun 10 22:53:03 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 12878145 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0CC73C43334 for ; Fri, 10 Jun 2022 22:53:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243284AbiFJWxT (ORCPT ); Fri, 10 Jun 2022 18:53:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:60546 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232323AbiFJWxS (ORCPT ); Fri, 10 Jun 2022 18:53:18 -0400 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A1EA013D6E; Fri, 10 Jun 2022 15:53:16 -0700 (PDT) Received: from g550jk.arnhem.chello.nl (31-151-115-246.dynamic.upc.nl [31.151.115.246]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id 4346ECD3E6; Fri, 10 Jun 2022 22:53:14 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1654901594; bh=juMgCw/nmNxQ3b7/bs0cS2U1BmqwcY93GEJ6mlprFdw=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=Bju+T6rInwzSBW3ypILRrq1fy+s/+nHgTYsNA4rnuiEvWnUihurQbkJT/V8ofaNwn 83De5atAk0X3IYG2NdtfhsG5j3fpIBtzvvEC+j/Ze/qY0HZRkwjmJjUZgKU5doM1oD LiBoCO1wwEodN25ig/mIGiUlXlQkznQIt+ulMh3M= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Vladimir Lypak , Luca Weiss , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] arm64: dts: qcom: msm8953: add MDSS Date: Sat, 11 Jun 2022 00:53:03 +0200 Message-Id: <20220610225304.267508-2-luca@z3ntu.xyz> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220610225304.267508-1-luca@z3ntu.xyz> References: <20220610225304.267508-1-luca@z3ntu.xyz> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Vladimir Lypak Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC. IOMMU is not added because support for it isn't yet upstream and MDSS works fine without IOMMU on 8953. Signed-off-by: Vladimir Lypak Signed-off-by: Luca Weiss --- arch/arm64/boot/dts/qcom/msm8953.dtsi | 202 ++++++++++++++++++++++++++ 1 file changed, 202 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index ffc3ec2cd3bc..a2aca3d05899 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -726,6 +726,208 @@ tcsr_phy_clk_scheme_sel: syscon@193f044 { reg = <0x193f044 0x4>; }; + mdss: mdss@1a00000 { + compatible = "qcom,mdss"; + + reg = <0x1a00000 0x1000>, + <0x1ab0000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + // iommus = <&apps_iommu 0xc00 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@1a94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x1a94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@1a94400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x1a94400 0x100>, + <0x1a94500 0x300>, + <0x1a94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + }; + + dsi1: dsi@1a96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x1a96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi1_phy 0>, + <&dsi1_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&dsi1_phy>; + phy-names = "dsi"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@1a96400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x1a96400 0x100>, + <0x1a96500 0x300>, + <0x1a96800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&xo_board>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x200f000 0x1000>,