@@ -81,6 +81,12 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r3-lte.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev0-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
new file mode 100644
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x10 => 16
+ * - bits 7..4: Panel ID: 0x1 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev0.dtsi"
+
+/ {
+ model = "Google Wormdingler rev0 BOE panel board";
+ compatible = "google,wormdingler-rev0-sku16", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
new file mode 100644
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0 => 0
+ * - bits 7..4: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler-rev0.dtsi"
+
+/ {
+ model = "Google Wormdingler rev0 INX panel board";
+ compatible = "google,wormdingler-rev0-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
new file mode 100644
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+&avdd_lcd {
+ gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+};
+
+&panel {
+ enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+};
+
+&v1p8_mipi {
+ gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor-wormdingler.dtsi */
+&avdd_lcd_en {
+ pinmux {
+ pins = "gpio80";
+ };
+
+ pinconf {
+ pins = "gpio80";
+ };
+};
+
+&mipi_1800_en {
+ pinmux {
+ pins = "gpio81";
+ };
+
+ pinconf {
+ pins = "gpio81";
+ };
+};
+&vdd_reset_1800 {
+ pinmux {
+ pins = "gpio76";
+ };
+
+ pinconf {
+ pins = "gpio76";
+ };
+};
new file mode 100644
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x401 => 1025
+ * - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ (BOE, rt5682s)";
+ compatible = "google,wormdingler-sku1025", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-drive-ldo-level = <450>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
new file mode 100644
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x400 => 1024
+ * - bits 11..8: Panel ID: 0x4 (BOE)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ BOE panel board";
+ compatible = "google,wormdingler-sku1024", "qcom,sc7180";
+};
+
+&dsi_phy {
+ qcom,phy-rescode-offset-top = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-rescode-offset-bot = /bits/ 8 <31 31 31 31 (-32)>;
+ qcom,phy-drive-ldo-level = <450>;
+};
+
+&panel {
+ compatible = "boe,tv110c9m-ll3";
+};
new file mode 100644
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0001 => 1
+ * - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ (INX, rt5682s)";
+ compatible = "google,wormdingler-sku1", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
+
+&alc5682 {
+ compatible = "realtek,rt5682s";
+ realtek,dmic1-clk-pin = <2>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+};
+
+&sound {
+ compatible = "google,sc7180-trogdor";
+ model = "sc7180-rt5682s-max98357a-1mic";
+};
new file mode 100644
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ *
+ * SKU: 0x0000 => 0
+ * - bits 11..8: Panel ID: 0x0 (INX)
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor-wormdingler.dtsi"
+
+/ {
+ model = "Google Wormdingler rev1+ INX panel board";
+ compatible = "google,wormdingler-sku0", "qcom,sc7180";
+};
+
+&panel {
+ compatible = "innolux,hj110iz-01a";
+};
new file mode 100644
@@ -0,0 +1,417 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Wormdingler board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180.dtsi"
+
+ap_ec_spi: &spi6 {};
+ap_h1_spi: &spi0 {};
+
+#include "sc7180-trogdor.dtsi"
+
+/ {
+ avdd_lcd: avdd-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_lcd";
+
+ gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avdd_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ avee_lcd: avee-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "avee_lcd";
+
+ gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&avee_lcd_en>;
+
+ vin-supply = <&pp5000_a>;
+ };
+
+ pp1800_ts:
+ v1p8_mipi: v1p8-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "v1p8_mipi";
+
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mipi_1800_en>;
+
+ vin-supply = <&pp3300_a>;
+ };
+
+ thermal-zones {
+ skin_temp_thermal: skin-temp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm6150_adc_tm 1>;
+ sustainable-power = <574>;
+
+ trips {
+ skin_temp_alert0: trip-point0 {
+ temperature = <58000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin_temp_alert1: trip-point1 {
+ temperature = <62500>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
+ skin-temp-crit {
+ temperature = <68000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&skin_temp_alert0>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&skin_temp_alert1>;
+ cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
+
+&ap_tp_i2c {
+ status = "disabled";
+};
+
+&backlight {
+ pwms = <&cros_ec_pwm 0>;
+};
+
+&camcc {
+ status = "okay";
+};
+
+&cros_ec {
+ base_detection: cbas {
+ compatible = "google,cros-cbas";
+ };
+};
+
+&dsi0 {
+
+ panel: panel@0 {
+ reg = <0>;
+ enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_reset_1800>;
+ avdd-supply = <&avdd_lcd>;
+ avee-supply = <&avee_lcd>;
+ pp1800-supply = <&v1p8_mipi>;
+ pp3300-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ rotation = <270>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@1 {
+ compatible = "hid-over-i2c";
+ reg = <0x01>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+
+ post-power-on-delay-ms = <70>;
+ hid-descr-addr = <0x0001>;
+
+ vdd-supply = <&pp3300_ts>;
+ vddl-supply = <&pp1800_ts>;
+ };
+};
+
+&pm6150_adc {
+ skin-temp-thermistor@4d {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
+ };
+};
+
+&pm6150_adc_tm {
+ status = "okay";
+
+ skin-temp-thermistor@1 {
+ reg = <1>;
+ io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time-us = <200>;
+ };
+};
+
+&pp1800_uf_cam {
+ status = "okay";
+};
+
+&pp1800_wf_cam {
+ status = "okay";
+};
+
+&pp2800_uf_cam {
+ status = "okay";
+};
+
+&pp2800_wf_cam {
+ status = "okay";
+};
+
+&wifi {
+ qcom,ath10k-calibration-variant = "GO_WORMDINGLER";
+};
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+pp3300_disp_on: &pp3300_dx_edp {
+ gpio = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+};
+
+/* PINCTRL - modifications to sc7180-trogdor.dtsi */
+
+/*
+ * No eDP on this board but it's logically the same signal so just give it
+ * a new name and assign the proper GPIO.
+ */
+
+tp_en: &en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio85";
+ };
+
+ pinconf {
+ pins = "gpio85";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "HUB_RST_L",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "UF_CAM_EN",
+ "WF_CAM_EN",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "",
+ "AP_EDP_BKLTEN",
+ "UF_CAM_MCLK",
+ "WF_CAM_CLK",
+ "",
+ "",
+ "UF_CAM_SDA",
+ "UF_CAM_SCL",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "AVEE_LCD_EN",
+ "",
+ "AMP_EN",
+ "",
+ "",
+ "",
+ "",
+ "HP_IRQ",
+ "WF_CAM_RST_L",
+ "UF_CAM_RST_L",
+ "AP_BRD_ID2",
+ "",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "BT_UART_CTS",
+ "BT_UART_RTS",
+ "BT_UART_TXD",
+ "BT_UART_RXD",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "WLAN_SW_CTRL",
+ "",
+ "REPORT_E",
+ "",
+ "ID0",
+ "",
+ "ID1",
+ "",
+ "",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "TP_EN",
+ "MIPI_1.8V_EN",
+ "VDD_RESET_1.8V",
+ "AVDD_LCD_EN",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "SDM_GRFC_3",
+ "",
+ "",
+ "BOOT_CONFIG_4",
+ "BOOT_CONFIG_2",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "BOOT_CONFIG_3",
+ "WCI2_LTE_COEX_TXD",
+ "WCI2_LTE_COEX_RXD",
+ "",
+ "",
+ "",
+ "",
+ "FORCED_USB_BOOT_POL",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+
+ avdd_lcd_en: avdd-lcd-en {
+ pinmux {
+ pins = "gpio88";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ avee_lcd_en: avee-lcd-en {
+ pinmux {
+ pins = "gpio21";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio21";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mipi_1800_en: mipi-1800-en {
+ pinmux {
+ pins = "gpio86";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio86";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ vdd_reset_1800: vdd-reset-1800 {
+ pinmux {
+ pins = "gpio87";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio87";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+};
Wormdingler is a trogdor-based board, shipping to customers as the Lenovo IdeaPad Chromebook Duet 3. These dts files are copies from the downstream Chrome OS 5.4 kernel, but with the camera (sc7180-trogdor-mipi-camera.dtsi) #include removed. Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> --- Changes in v6: - Picked up recent v5.4 changes to sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts and sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts Changes in v5: - Replaced _ in node name with - - Ordered nodes by name Changes in v4: - Cleaned up rt5682s files - Restored camcc definition - Added missing version history Changes in v3: - Removed camcc definition Changes in v2: - Word wrapped patch description. - Removed "Author" from patch description. - Fixed whitespace around "en_pp3300_dx_edp" arch/arm64/boot/dts/qcom/Makefile | 6 + .../sc7180-trogdor-wormdingler-rev0-boe.dts | 22 + .../sc7180-trogdor-wormdingler-rev0-inx.dts | 22 + .../qcom/sc7180-trogdor-wormdingler-rev0.dtsi | 53 +++ ...0-trogdor-wormdingler-rev1-boe-rt5682s.dts | 39 ++ .../sc7180-trogdor-wormdingler-rev1-boe.dts | 28 ++ ...0-trogdor-wormdingler-rev1-inx-rt5682s.dts | 33 ++ .../sc7180-trogdor-wormdingler-rev1-inx.dts | 22 + .../dts/qcom/sc7180-trogdor-wormdingler.dtsi | 417 ++++++++++++++++++ 9 files changed, 642 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0-inx.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev0.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-boe.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx-rt5682s.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler-rev1-inx.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi