diff mbox series

clk: qcom: sc8280xp: add parent to gcc_ufs_phy_axi_clk for sa8540p

Message ID 20220623142837.3140680-1-bmasney@redhat.com (mailing list archive)
State Changes Requested
Headers show
Series clk: qcom: sc8280xp: add parent to gcc_ufs_phy_axi_clk for sa8540p | expand

Commit Message

Brian Masney June 23, 2022, 2:28 p.m. UTC
The sa8540p automotive board has the same SOC as the sc8280xp. In order
to get the first UFS controller working on the sa8540p,
GCC_UFS_REF_CLKREF_CLK needs to be setup as a parent to
GCC_UFS_PHY_AXI_CLK.

This clock name came from the DTS for the downstream MSM 5.4 kernel
sources for the sa8540p. It also references GCC_UFS_CARD_CLKREF_CLK,
however that wasn't needed to get the first UFS controller working.

Signed-off-by: Brian Masney <bmasney@redhat.com>
---
I originally added this under GCC_UFS_PHY_PHY_AUX_CLK since that's
what's in the downstream DTS. I was getting errors about
GCC_UFS_PHY_AXI_CLK being stuck at off so I moved it there.

Also I don't have access to any documentation for this board so I'm
hoping that someone with docs access can verify that this is the
appropriate place to put this.

 drivers/clk/qcom/gcc-sc8280xp.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

Comments

Andrew Halaney June 23, 2022, 3:32 p.m. UTC | #1
On Thu, Jun 23, 2022 at 10:28:37AM -0400, Brian Masney wrote:
> The sa8540p automotive board has the same SOC as the sc8280xp. In order
> to get the first UFS controller working on the sa8540p,
> GCC_UFS_REF_CLKREF_CLK needs to be setup as a parent to
> GCC_UFS_PHY_AXI_CLK.
> 
> This clock name came from the DTS for the downstream MSM 5.4 kernel
> sources for the sa8540p. It also references GCC_UFS_CARD_CLKREF_CLK,
> however that wasn't needed to get the first UFS controller working.
> 

I'm not knowledgable enough on the clock subsystem or have access to
documentation to comment on correctness outside of the 5.4 MSM kernel
you mentioned, but I think this probably deserves a Fixes: tag?

I can at least also comment that without this change the sa8540p doesn't
boot on the QDrive3 boards we have.

Thanks,
Andrew

> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
> I originally added this under GCC_UFS_PHY_PHY_AUX_CLK since that's
> what's in the downstream DTS. I was getting errors about
> GCC_UFS_PHY_AXI_CLK being stuck at off so I moved it there.
> 
> Also I don't have access to any documentation for this board so I'm
> hoping that someone with docs access can verify that this is the
> appropriate place to put this.
> 
>  drivers/clk/qcom/gcc-sc8280xp.c | 27 ++++++++++++++-------------
>  1 file changed, 14 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> index 4b894442fdf5..4639b50da418 100644
> --- a/drivers/clk/qcom/gcc-sc8280xp.c
> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> @@ -5685,6 +5685,19 @@ static struct clk_branch gcc_ufs_phy_ahb_clk = {
>  	},
>  };
>  
> +static struct clk_branch gcc_ufs_ref_clkref_clk = {
> +	.halt_reg = 0x8c058,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x8c058,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(const struct clk_init_data) {
> +			.name = "gcc_ufs_ref_clkref_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
>  static struct clk_branch gcc_ufs_phy_axi_clk = {
>  	.halt_reg = 0x77010,
>  	.halt_check = BRANCH_HALT_VOTED,
> @@ -5696,6 +5709,7 @@ static struct clk_branch gcc_ufs_phy_axi_clk = {
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_ufs_phy_axi_clk",
>  			.parent_hws = (const struct clk_hw*[]){
> +				&gcc_ufs_ref_clkref_clk.clkr.hw,
>  				&gcc_ufs_phy_axi_clk_src.clkr.hw,
>  			},
>  			.num_parents = 1,
> @@ -5899,19 +5913,6 @@ static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = {
>  	},
>  };
>  
> -static struct clk_branch gcc_ufs_ref_clkref_clk = {
> -	.halt_reg = 0x8c058,
> -	.halt_check = BRANCH_HALT,
> -	.clkr = {
> -		.enable_reg = 0x8c058,
> -		.enable_mask = BIT(0),
> -		.hw.init = &(const struct clk_init_data) {
> -			.name = "gcc_ufs_ref_clkref_clk",
> -			.ops = &clk_branch2_ops,
> -		},
> -	},
> -};
> -
>  static struct clk_branch gcc_usb2_hs0_clkref_clk = {
>  	.halt_reg = 0x8c044,
>  	.halt_check = BRANCH_HALT,
> -- 
> 2.36.1
>
Brian Masney June 23, 2022, 5:13 p.m. UTC | #2
On Thu, Jun 23, 2022 at 10:32:26AM -0500, Andrew Halaney wrote:
> I'm not knowledgable enough on the clock subsystem or have access to
> documentation to comment on correctness outside of the 5.4 MSM kernel
> you mentioned, but I think this probably deserves a Fixes: tag?

Good call!

Fixes: d65d005f9a6c ("clk: qcom: add sc8280xp GCC driver")
Stephen Boyd June 24, 2022, 12:20 a.m. UTC | #3
Quoting Brian Masney (2022-06-23 07:28:37)
> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> index 4b894442fdf5..4639b50da418 100644
> --- a/drivers/clk/qcom/gcc-sc8280xp.c
> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> @@ -5696,6 +5709,7 @@ static struct clk_branch gcc_ufs_phy_axi_clk = {
>                 .hw.init = &(const struct clk_init_data) {
>                         .name = "gcc_ufs_phy_axi_clk",
>                         .parent_hws = (const struct clk_hw*[]){
> +                               &gcc_ufs_ref_clkref_clk.clkr.hw,
>                                 &gcc_ufs_phy_axi_clk_src.clkr.hw,
>                         },
>                         .num_parents = 1,

num_parents needs an update. But this is a branch, not a mux, so it
can't have more than one parent.
Brian Masney June 24, 2022, 4:40 p.m. UTC | #4
On Thu, Jun 23, 2022 at 05:20:53PM -0700, Stephen Boyd wrote:
> Quoting Brian Masney (2022-06-23 07:28:37)
> > diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> > index 4b894442fdf5..4639b50da418 100644
> > --- a/drivers/clk/qcom/gcc-sc8280xp.c
> > +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> > @@ -5696,6 +5709,7 @@ static struct clk_branch gcc_ufs_phy_axi_clk = {
> >                 .hw.init = &(const struct clk_init_data) {
> >                         .name = "gcc_ufs_phy_axi_clk",
> >                         .parent_hws = (const struct clk_hw*[]){
> > +                               &gcc_ufs_ref_clkref_clk.clkr.hw,
> >                                 &gcc_ufs_phy_axi_clk_src.clkr.hw,
> >                         },
> >                         .num_parents = 1,
> 
> num_parents needs an update. 

Oops!

> But this is a branch, not a mux, so it can't have more than one
> parent.

Would a mux be represented with 'struct clk_rcg2'?

Brian
Stephen Boyd June 24, 2022, 8:16 p.m. UTC | #5
Quoting Brian Masney (2022-06-24 09:40:26)
> On Thu, Jun 23, 2022 at 05:20:53PM -0700, Stephen Boyd wrote:
> > Quoting Brian Masney (2022-06-23 07:28:37)
> > > diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> > > index 4b894442fdf5..4639b50da418 100644
> > > --- a/drivers/clk/qcom/gcc-sc8280xp.c
> > > +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> > > @@ -5696,6 +5709,7 @@ static struct clk_branch gcc_ufs_phy_axi_clk = {
> > >                 .hw.init = &(const struct clk_init_data) {
> > >                         .name = "gcc_ufs_phy_axi_clk",
> > >                         .parent_hws = (const struct clk_hw*[]){
> > > +                               &gcc_ufs_ref_clkref_clk.clkr.hw,
> > >                                 &gcc_ufs_phy_axi_clk_src.clkr.hw,
> > >                         },
> > >                         .num_parents = 1,
> > 
> > num_parents needs an update. 
> 
> Oops!
> 
> > But this is a branch, not a mux, so it can't have more than one
> > parent.
> 
> Would a mux be represented with 'struct clk_rcg2'?
> 

Could be. An RCG is more than a mux, because it also has a divider and
an m/n counter.
Bjorn Andersson July 16, 2022, 2:54 p.m. UTC | #6
On Thu 23 Jun 09:28 CDT 2022, Brian Masney wrote:

> The sa8540p automotive board has the same SOC as the sc8280xp. In order
> to get the first UFS controller working on the sa8540p,
> GCC_UFS_REF_CLKREF_CLK needs to be setup as a parent to
> GCC_UFS_PHY_AXI_CLK.
> 
> This clock name came from the DTS for the downstream MSM 5.4 kernel
> sources for the sa8540p. It also references GCC_UFS_CARD_CLKREF_CLK,
> however that wasn't needed to get the first UFS controller working.
> 
> Signed-off-by: Brian Masney <bmasney@redhat.com>
> ---
> I originally added this under GCC_UFS_PHY_PHY_AUX_CLK since that's
> what's in the downstream DTS. I was getting errors about
> GCC_UFS_PHY_AXI_CLK being stuck at off so I moved it there.
> 
> Also I don't have access to any documentation for this board so I'm
> hoping that someone with docs access can verify that this is the
> appropriate place to put this.
> 
>  drivers/clk/qcom/gcc-sc8280xp.c | 27 ++++++++++++++-------------
>  1 file changed, 14 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
> index 4b894442fdf5..4639b50da418 100644
> --- a/drivers/clk/qcom/gcc-sc8280xp.c
> +++ b/drivers/clk/qcom/gcc-sc8280xp.c
> @@ -5685,6 +5685,19 @@ static struct clk_branch gcc_ufs_phy_ahb_clk = {
>  	},
>  };
>  
> +static struct clk_branch gcc_ufs_ref_clkref_clk = {
> +	.halt_reg = 0x8c058,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x8c058,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(const struct clk_init_data) {
> +			.name = "gcc_ufs_ref_clkref_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
>  static struct clk_branch gcc_ufs_phy_axi_clk = {
>  	.halt_reg = 0x77010,
>  	.halt_check = BRANCH_HALT_VOTED,
> @@ -5696,6 +5709,7 @@ static struct clk_branch gcc_ufs_phy_axi_clk = {
>  		.hw.init = &(const struct clk_init_data) {
>  			.name = "gcc_ufs_phy_axi_clk",
>  			.parent_hws = (const struct clk_hw*[]){
> +				&gcc_ufs_ref_clkref_clk.clkr.hw,

gcc_ufs_ref_clkref_clk isn't the parent of gcc_ufs_phy_axi_clk.

But I presume that if this works, then you're just enabling the ufs
clkref clock, indirectly. Seems reasonable that you should be specifying
gcc_ufs_ref_clkref_clk as "ref_clk" instead.

Could you please give that a go?

Regards,
Bjorn

>  				&gcc_ufs_phy_axi_clk_src.clkr.hw,
>  			},
>  			.num_parents = 1,
> @@ -5899,19 +5913,6 @@ static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = {
>  	},
>  };
>  
> -static struct clk_branch gcc_ufs_ref_clkref_clk = {
> -	.halt_reg = 0x8c058,
> -	.halt_check = BRANCH_HALT,
> -	.clkr = {
> -		.enable_reg = 0x8c058,
> -		.enable_mask = BIT(0),
> -		.hw.init = &(const struct clk_init_data) {
> -			.name = "gcc_ufs_ref_clkref_clk",
> -			.ops = &clk_branch2_ops,
> -		},
> -	},
> -};
> -
>  static struct clk_branch gcc_usb2_hs0_clkref_clk = {
>  	.halt_reg = 0x8c044,
>  	.halt_check = BRANCH_HALT,
> -- 
> 2.36.1
>
Brian Masney July 19, 2022, 6:49 p.m. UTC | #7
On Sat, Jul 16, 2022 at 09:54:43AM -0500, Bjorn Andersson wrote:
> gcc_ufs_ref_clkref_clk isn't the parent of gcc_ufs_phy_axi_clk.
> 
> But I presume that if this works, then you're just enabling the ufs
> clkref clock, indirectly. Seems reasonable that you should be specifying
> gcc_ufs_ref_clkref_clk as "ref_clk" instead.
> 
> Could you please give that a go?

Hey Bjorn,

I assume you mean ref_aux on the phy with this patch:

--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1464,7 +1464,7 @@ ufs_mem_phy: phy@1d87000 {
                        clock-names = "ref",
                                      "ref_aux";
                        clocks = <&rpmhcc RPMH_CXO_CLK>,
-                                <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+                                <&gcc GCC_UFS_REF_CLKREF_CLK>;
 
                        resets = <&ufs_mem_hc 0>;
                        reset-names = "ufsphy";

This works on the sa8540p.

I tried changing ref_clk on the ufs host controller from
<&rpmhcc RPMH_CXO_CLK> to the new value and the board resets.

Brian
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-sc8280xp.c b/drivers/clk/qcom/gcc-sc8280xp.c
index 4b894442fdf5..4639b50da418 100644
--- a/drivers/clk/qcom/gcc-sc8280xp.c
+++ b/drivers/clk/qcom/gcc-sc8280xp.c
@@ -5685,6 +5685,19 @@  static struct clk_branch gcc_ufs_phy_ahb_clk = {
 	},
 };
 
+static struct clk_branch gcc_ufs_ref_clkref_clk = {
+	.halt_reg = 0x8c058,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8c058,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "gcc_ufs_ref_clkref_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_ufs_phy_axi_clk = {
 	.halt_reg = 0x77010,
 	.halt_check = BRANCH_HALT_VOTED,
@@ -5696,6 +5709,7 @@  static struct clk_branch gcc_ufs_phy_axi_clk = {
 		.hw.init = &(const struct clk_init_data) {
 			.name = "gcc_ufs_phy_axi_clk",
 			.parent_hws = (const struct clk_hw*[]){
+				&gcc_ufs_ref_clkref_clk.clkr.hw,
 				&gcc_ufs_phy_axi_clk_src.clkr.hw,
 			},
 			.num_parents = 1,
@@ -5899,19 +5913,6 @@  static struct clk_branch gcc_ufs_phy_unipro_core_hw_ctl_clk = {
 	},
 };
 
-static struct clk_branch gcc_ufs_ref_clkref_clk = {
-	.halt_reg = 0x8c058,
-	.halt_check = BRANCH_HALT,
-	.clkr = {
-		.enable_reg = 0x8c058,
-		.enable_mask = BIT(0),
-		.hw.init = &(const struct clk_init_data) {
-			.name = "gcc_ufs_ref_clkref_clk",
-			.ops = &clk_branch2_ops,
-		},
-	},
-};
-
 static struct clk_branch gcc_usb2_hs0_clkref_clk = {
 	.halt_reg = 0x8c044,
 	.halt_check = BRANCH_HALT,