@@ -79,6 +79,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-auo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev0-boe.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-auo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-mrbland-rev1-boe.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-lte-ti.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-parade.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pazquel-ti.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-pompom-r2.dtb
new file mode 100644
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade,LTE)";
+ compatible = "google,pazquel-sku4", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+#include "sc7180-trogdor-lte-sku.dtsi"
+
+/ {
+ model = "Google Pazquel (TI,LTE)";
+ compatible = "google,pazquel-sku0", "google,pazquel-sku2", "qcom,sc7180";
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-parade-ps8640.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (Parade)";
+ compatible = "google,pazquel-sku5", "qcom,sc7180";
+};
new file mode 100644
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7180-trogdor.dtsi"
+#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
+#include "sc7180-trogdor-pazquel.dtsi"
+
+/ {
+ model = "Google Pazquel (TI)";
+ compatible = "google,pazquel-sku1", "qcom,sc7180";
+};
new file mode 100644
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Pazquel board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/* This file must be included after sc7180-trogdor.dtsi */
+
+&ap_sar_sensor {
+ compatible = "semtech,sx9324";
+ semtech,ph0-pin = <1 3 3>;
+ semtech,ph1-pin = <3 1 3>;
+ semtech,ph2-pin = <1 3 3>;
+ semtech,ph3-pin = <0 0 0>;
+ semtech,ph01-resolution = <1024>;
+ semtech,ph23-resolution = <1024>;
+ semtech,startup-sensor = <1>;
+ semtech,ph01-proxraw-strength = <3>;
+ semtech,ph23-proxraw-strength = <1>;
+ semtech,avg-pos-strength = <128>;
+ semtech,input-analog-gain = <0>;
+ semtech,cs-idle-sleep = "gnd";
+
+ /delete-property/ svdd-supply;
+ vdd-supply = <&pp1800_prox>;
+};
+
+/delete-node/&trackpad;
+&ap_tp_i2c {
+ status = "okay";
+ trackpad: trackpad@15 {
+ compatible = "hid-over-i2c";
+ reg = <0x15>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+ vcc-supply = <&pp3300_fp_tp>;
+ post-power-on-delay-ms = <100>;
+ hid-descr-addr = <0x0001>;
+
+ wakeup-source;
+ };
+};
+
+&keyboard_controller {
+ function-row-physmap = <
+ MATRIX_KEY(0x00, 0x02, 0) /* T1 */
+ MATRIX_KEY(0x03, 0x02, 0) /* T2 */
+ MATRIX_KEY(0x02, 0x02, 0) /* T3 */
+ MATRIX_KEY(0x01, 0x02, 0) /* T4 */
+ MATRIX_KEY(0x03, 0x04, 0) /* T5 */
+ MATRIX_KEY(0x02, 0x04, 0) /* T6 */
+ MATRIX_KEY(0x01, 0x04, 0) /* T7 */
+ MATRIX_KEY(0x02, 0x09, 0) /* T8 */
+ MATRIX_KEY(0x01, 0x09, 0) /* T9 */
+ MATRIX_KEY(0x00, 0x04, 0) /* T10 */
+ >;
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x02, KEY_BACK)
+ MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+ MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+ MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+ MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+ MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+ MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+ MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+ MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+ MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+ CROS_STD_MAIN_KEYMAP
+ >;
+};
+
+&panel {
+ compatible = "edp-panel";
+};
+
+&pp3300_dx_edp {
+ gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+};
+
+&en_pp3300_dx_edp {
+ pinmux {
+ pins = "gpio67";
+ };
+
+ pinconf {
+ pins = "gpio67";
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "TP_INT_ODL",
+ "AP_RAM_ID0",
+ "AP_SKU_ID2",
+ "AP_RAM_ID1",
+ "",
+ "AP_RAM_ID2",
+ "AP_TP_I2C_SDA",
+ "AP_TP_I2C_SCL",
+ "TS_RESET_L",
+ "TS_INT_L",
+ "",
+ "EDP_BRIJ_IRQ",
+ "AP_EDP_BKLTEN",
+ "",
+ "",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "HUB_RST_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AMP_EN",
+ "P_SENSOR_INT_L",
+ "AP_SAR_SENSOR_SDA",
+ "AP_SAR_SENSOR_SCL",
+ "",
+ "HP_IRQ",
+ "",
+ "",
+ "AP_BRD_ID2",
+ "BRIJ_SUSPEND",
+ "AP_BRD_ID0",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "",
+ "",
+ "",
+ "H1_AP_INT_ODL",
+ "",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DIN",
+ "",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "HP_MCLK",
+ "AP_SKU_ID0",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_SPI_CLK",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_L.
+ */
+ "AP_FLASH_WP_L",
+ "EN_PP3300_DX_EDP",
+ "AP_SPI_CS0_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "CODEC_PWR_EN",
+ "HUB_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_SKU_ID1",
+ "AP_RST_REQ",
+ "",
+ "AP_BRD_ID1",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "EDP_BRIJ_EN",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "AP_TS_PEN_I2C_SDA",
+ "AP_TS_PEN_I2C_SCL",
+ "DP_HOT_PLUG_DET",
+ "EC_IN_RW_ODL";
+};
@@ -11,6 +11,12 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/sc7180-lpass.h>
+#ifdef __SC7180_TROGDOR_DTSI__
+#error "Duplicate include"
+#else
+#define __SC7180_TROGDOR_DTSI__
+#endif
+
#include "sc7180.dtsi"
/* PMICs depend on spmi_bus label and so must come after sc7180.dtsi */
#include "pm6150.dtsi"
Pazquel is a trogdor-based board. These dts files are unchanged copies from the downstream Chrome OS 5.4 kernel. Signed-off-by: Joseph S. Barrera III <joebar@chromium.org> --- Changes in v13: - Remove 'include sc7180-trogdor.dtsi' in sc7180-trogdor-ti-sn65dsi86.dtsi. - Add compile-time test for duplicate include in sc7180-trogdor.dtsi. Changes in v12: - Replace 'include sc7180.dtsi' with 'include sc7180-trogdor.dtsi' in sc7180-trogdor-ti-sn65dsi86.dtsi. Changes in v11: - Add 'include sc7180-trogdor.dtsi' to sc7180-trogdor-pazquel-* files. - Restore 'include sc7180.dtsi' to sc7180-trogdor-ti-sn65dsi86.dtsi. Changes in v10: - Remove 'include sc7180.dtsi' from *all* sc7180-trogdor-pazquel* files. - Move "okay" for ap_tp_i2c to proper location. Changes in v9: - Restore two lines accidentally removed from ap_sar_sensor. - Simplify trackpad enabling (51d30402be75). Changes in v7: - Only include sc7180.dtsi in sc7180-trogdor.dtsi (19794489fa24). - Simplify spi0/spi6 labeling (d277cab7afc7). - Remove #include of <arm/cros-ec-keyboard.dtsi>. - Accidentally removed two lines from ap_sar_sensor. Changes in v6: - Copy changes to ap_sar_sensor from v5.4. - Add #include of <arm/cros-ec-keyboard.dtsi>. Changes in v4: - Fix description (no downstream bits removed). - Add missing version history. Changes in v3: - First inclusion in series. arch/arm64/boot/dts/qcom/Makefile | 4 + .../sc7180-trogdor-pazquel-lte-parade.dts | 22 ++ .../qcom/sc7180-trogdor-pazquel-lte-ti.dts | 22 ++ .../qcom/sc7180-trogdor-pazquel-parade.dts | 17 ++ .../dts/qcom/sc7180-trogdor-pazquel-ti.dts | 17 ++ .../boot/dts/qcom/sc7180-trogdor-pazquel.dtsi | 221 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 + 7 files changed, 309 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-parade.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-lte-ti.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-parade.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel-ti.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-pazquel.dtsi