diff mbox series

[v2,1/4] arm64: dts: qcom: sc8280xp: fix USB clock order and naming

Message ID 20220715070248.19078-2-johan+linaro@kernel.org (mailing list archive)
State Accepted
Commit 68af5d7c6d6dae12be6bb4fb52aabe8e1b7a2fe0
Headers show
Series arm64: dts: qcom: USB clock and interrupt fixes | expand

Commit Message

Johan Hovold July 15, 2022, 7:02 a.m. UTC 
Fix the USB controller clock order and naming so that they match the
devicetree binding.

Note that the driver currently simply enables all clocks in the order
that they are specified in the devicetree. Reordering the clocks as per
the binding means that the only explicit ordering constraint found in
the vendor driver, that cfg_noc should be enabled before the core_clk,
is now honoured.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Krzysztof Kozlowski July 15, 2022, 9:25 a.m. UTC | #1 
On 15/07/2022 09:02, Johan Hovold wrote:
> Fix the USB controller clock order and naming so that they match the
> devicetree binding.
> 
> Note that the driver currently simply enables all clocks in the order
> that they are specified in the devicetree. Reordering the clocks as per
> the binding means that the only explicit ordering constraint found in
> the vendor driver, that cfg_noc should be enabled before the core_clk,
> is now honoured.


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 285a9828c250..45cc7d714fd2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1855,16 +1855,16 @@  usb_0: usb@a6f8800 {
 			#size-cells = <2>;
 			ranges;
 
-			clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				 <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
 				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
 				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
 				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
 				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
-			clock-names = "core", "iface", "bus_aggr", "utmi", "sleep",
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
 				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
@@ -1905,16 +1905,16 @@  usb_1: usb@a8f8800 {
 			#size-cells = <2>;
 			ranges;
 
-			clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>,
-				 <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
 				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
-				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
 				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
 				 <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
 				 <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
 				 <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
 				 <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
-			clock-names = "core", "iface", "bus_aggr", "utmi", "sleep",
+			clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi",
 				      "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
 
 			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,