Message ID | 20220817130342.568396-13-krzysztof.kozlowski@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | arm64: dts: qcom: improvements to TCSR mutex in DTS | expand |
On 17.08.2022 15:03, Krzysztof Kozlowski wrote: > The TCSR mutex bindings allow device to be described only with address > space (so it uses MMIO, not syscon regmap). This seems reasonable as > TCSR mutex is actually a dedicated IO address space and it also fixes DT > schema checks: > > qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property > qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Not tested on a device, but looks good to the eye: Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 +++-------- > 1 file changed, 3 insertions(+), 8 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index 9ab990061522..3a94eb2cc448 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -295,12 +295,6 @@ smem { > hwlocks = <&tcsr_mutex 3>; > }; > > - tcsr_mutex: hwlock { > - compatible = "qcom,tcsr-mutex"; > - syscon = <&tcsr_mutex_regs 0 0x1000>; > - #hwlock-cells = <1>; > - }; > - > soc: soc@0 { > #address-cells = <1>; > #size-cells = <1>; > @@ -726,9 +720,10 @@ gcc: clock-controller@1800000 { > assigned-clock-rates = <19200000>; > }; > > - tcsr_mutex_regs: syscon@1905000 { > - compatible = "syscon"; > + tcsr_mutex: hwlock@1905000 { > + compatible = "qcom,tcsr-mutex"; > reg = <0x01905000 0x20000>; > + #hwlock-cells = <1>; > }; > > tcsr: syscon@1937000 {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 9ab990061522..3a94eb2cc448 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -295,12 +295,6 @@ smem { hwlocks = <&tcsr_mutex 3>; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - soc: soc@0 { #address-cells = <1>; #size-cells = <1>; @@ -726,9 +720,10 @@ gcc: clock-controller@1800000 { assigned-clock-rates = <19200000>; }; - tcsr_mutex_regs: syscon@1905000 { - compatible = "syscon"; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; }; tcsr: syscon@1937000 {
The TCSR mutex bindings allow device to be described only with address space (so it uses MMIO, not syscon regmap). This seems reasonable as TCSR mutex is actually a dedicated IO address space and it also fixes DT schema checks: qcom/qcs404-evb-4000.dtb: hwlock: 'reg' is a required property qcom/qcs404-evb-4000.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)