diff mbox series

dt-bindings: remoteproc: Add missing (unevaluated|additional)Properties on child nodes

Message ID 20220823145649.3118479-10-robh@kernel.org (mailing list archive)
State Not Applicable
Headers show
Series dt-bindings: remoteproc: Add missing (unevaluated|additional)Properties on child nodes | expand

Commit Message

Rob Herring (Arm) Aug. 23, 2022, 2:56 p.m. UTC
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).

Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml      | 1 +
 .../devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml      | 1 +
 .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml     | 1 +
 3 files changed, 3 insertions(+)

Comments

Krzysztof Kozlowski Aug. 25, 2022, 8:23 a.m. UTC | #1
On 23/08/2022 17:56, Rob Herring wrote:
> In order to ensure only documented properties are present, node schemas
> must have unevaluatedProperties or additionalProperties set to false
> (typically).
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml      | 1 +
>  .../devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml      | 1 +
>  .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml     | 1 +
>  3 files changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> index e76c861165dd..e4a7da8020f4 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> @@ -140,6 +140,7 @@ properties:
>  
>    glink-edge:
>      $ref: qcom,glink-edge.yaml#
> +    unevaluatedProperties: false

Is it actually needed? The qcom,glink-edge.yaml has
additionalProperties:false, so I expect it to complain if anything
appears here.

Best regards,
Krzysztof
Rob Herring (Arm) Aug. 25, 2022, 1:13 p.m. UTC | #2
On Thu, Aug 25, 2022 at 3:23 AM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 23/08/2022 17:56, Rob Herring wrote:
> > In order to ensure only documented properties are present, node schemas
> > must have unevaluatedProperties or additionalProperties set to false
> > (typically).
> >
> > Signed-off-by: Rob Herring <robh@kernel.org>
> > ---
> >  .../devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml      | 1 +
> >  .../devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml      | 1 +
> >  .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml     | 1 +
> >  3 files changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> > index e76c861165dd..e4a7da8020f4 100644
> > --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
> > @@ -140,6 +140,7 @@ properties:
> >
> >    glink-edge:
> >      $ref: qcom,glink-edge.yaml#
> > +    unevaluatedProperties: false
>
> Is it actually needed? The qcom,glink-edge.yaml has
> additionalProperties:false, so I expect it to complain if anything
> appears here.

Perhaps not, but I'm trying to come up with a meta-schema to check
these though I'm not sure I can get to no warnings which is how I
found all these cases. The main remaining warnings are bus child node
pattern schemas which can perhaps be handled with
'additionalProperties: true'. The rule I have says if properties or
patternProperties is present then unevaluatedProperties or
additionalProperties must be. To handle this case, I think we'd have
to walk the $ref and check it.

Anyways, we can hold off on this one until when and if there's a
meta-schema in place.

Rob
Krzysztof Kozlowski Aug. 26, 2022, 6:19 a.m. UTC | #3
On 25/08/2022 16:13, Rob Herring wrote:
> On Thu, Aug 25, 2022 at 3:23 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@linaro.org> wrote:
>>
>> On 23/08/2022 17:56, Rob Herring wrote:
>>> In order to ensure only documented properties are present, node schemas
>>> must have unevaluatedProperties or additionalProperties set to false
>>> (typically).
>>>
>>> Signed-off-by: Rob Herring <robh@kernel.org>
>>> ---
>>>  .../devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml      | 1 +
>>>  .../devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml      | 1 +
>>>  .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml     | 1 +
>>>  3 files changed, 3 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
>>> index e76c861165dd..e4a7da8020f4 100644
>>> --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
>>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
>>> @@ -140,6 +140,7 @@ properties:
>>>
>>>    glink-edge:
>>>      $ref: qcom,glink-edge.yaml#
>>> +    unevaluatedProperties: false
>>
>> Is it actually needed? The qcom,glink-edge.yaml has
>> additionalProperties:false, so I expect it to complain if anything
>> appears here.
> 
> Perhaps not, but I'm trying to come up with a meta-schema to check
> these though I'm not sure I can get to no warnings which is how I
> found all these cases. The main remaining warnings are bus child node
> pattern schemas which can perhaps be handled with
> 'additionalProperties: true'. The rule I have says if properties or
> patternProperties is present then unevaluatedProperties or
> additionalProperties must be. To handle this case, I think we'd have
> to walk the $ref and check it.
> 
> Anyways, we can hold off on this one until when and if there's a
> meta-schema in place.

For me adding unevaluatedProp:false everywhere with $ref is okay and it
makes the code easier to read - no need to dive into referenced schema
to remember if it allows or does not allow additional properties. It is
also a safer choice if referenced schema forgot to set additionalProp:false.

However if referenced schema has additionalProp:false, then
unevaluatedProp:false here is redundant and question is whether the
redundancy is worth additional readability/obviousness.

To me, unevaluatedProp:false here would during review save time - no
need to jump into referenced schema to check what is there. If we make
it a rule / coding convention, then I am in.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Rob Herring (Arm) Sept. 12, 2022, 7:05 p.m. UTC | #4
On Tue, 23 Aug 2022 09:56:41 -0500, Rob Herring wrote:
> In order to ensure only documented properties are present, node schemas
> must have unevaluatedProperties or additionalProperties set to false
> (typically).
> 
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml      | 1 +
>  .../devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml      | 1 +
>  .../devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml     | 1 +
>  3 files changed, 3 insertions(+)
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
index e76c861165dd..e4a7da8020f4 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-mss-pil.yaml
@@ -140,6 +140,7 @@  properties:
 
   glink-edge:
     $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
     description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the DSP.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
index da1a5de3d38b..b4de0521a89d 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
@@ -154,6 +154,7 @@  properties:
 
   glink-edge:
     $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
     description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the DSP.
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
index 3f06d66cbe47..b6bd33438584 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-wpss-pil.yaml
@@ -107,6 +107,7 @@  properties:
 
   glink-edge:
     $ref: qcom,glink-edge.yaml#
+    unevaluatedProperties: false
     description:
       Qualcomm G-Link subnode which represents communication edge, channels
       and devices related to the ADSP.