| Message ID | 20220826181923.251564-8-manivannan.sadhasivam@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Improvements to the Qcom PCIe Endpoint driver | expand |
On 26/08/2022 21:19, Manivannan Sadhasivam wrote: > PERST separation is an optional debug feature used to collect the crash > dump from the PCIe endpoint devices by the PCIe host when the endpoint > crashes. This feature keeps the PCIe link up by separating the PCIe IP > block from the SoC reset logic. > > So remove the corresponding property "qcom,perst-regs" from the required > properties list. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index 3d23599e5e91..b728ede3f09f 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -105,7 +105,6 @@ required: - reg-names - clocks - clock-names - - qcom,perst-regs - interrupts - interrupt-names - reset-gpios
PERST separation is an optional debug feature used to collect the crash dump from the PCIe endpoint devices by the PCIe host when the endpoint crashes. This feature keeps the PCIe link up by separating the PCIe IP block from the SoC reset logic. So remove the corresponding property "qcom,perst-regs" from the required properties list. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml | 1 - 1 file changed, 1 deletion(-)