diff mbox series

arm64: dts: qcom: sc7180: Configure USB as wakeup source

Message ID 20220901101658.1.I347ea409ee3134bd32a29e33fecd1a6ef32085a0@changeid (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: sc7180: Configure USB as wakeup source | expand

Commit Message

Matthias Kaehlcke Sept. 1, 2022, 5:17 p.m. UTC
The dwc3 USB controller of the sc7180 supports USB remote
wakeup, configure it as a wakeup source.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Matthias Kaehlcke Sept. 1, 2022, 5:25 p.m. UTC | #1
On Thu, Sep 01, 2022 at 10:17:03AM -0700, Matthias Kaehlcke wrote:
> The dwc3 USB controller of the sc7180 supports USB remote
> wakeup, configure it as a wakeup source.
> 
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> 
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 2d1f38342858..507718f309e1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2780,7 +2780,9 @@ usb_1: usb@a6f8800 {
>  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			wakeup-source;
> +
> +			usb_1_dwc3: usb@a600000 {

Please disregard this version, it is based on a downstream branch which I used
for testing.

>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xe000>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.37.2.789.g6183377224-goog
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 2d1f38342858..507718f309e1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2780,7 +2780,9 @@  usb_1: usb@a6f8800 {
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: dwc3@a600000 {
+			wakeup-source;
+
+			usb_1_dwc3: usb@a600000 {
 				compatible = "snps,dwc3";
 				reg = <0 0x0a600000 0 0xe000>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;