diff mbox series

[04/16] phy: qcom-qmp-pcie: drop unused defines

Message ID 20220907110728.19092-5-johan+linaro@kernel.org (mailing list archive)
State Not Applicable
Headers show
Series phy: qcom-qmp: further clean ups | expand

Commit Message

Johan Hovold Sept. 7, 2022, 11:07 a.m. UTC 
Drop defines and enums that are unused since the QMP driver split.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 24 ------------------------
 1 file changed, 24 deletions(-)

Comments

Dmitry Baryshkov Sept. 9, 2022, 9:37 a.m. UTC | #1 
On 07/09/2022 14:07, Johan Hovold wrote:
> Drop defines and enums that are unused since the QMP driver split.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 24 ------------------------
>   1 file changed, 24 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 860620972d8a..c5d8eedab4ea 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -32,32 +32,11 @@ 
 /* QPHY_START_CONTROL bits */
 #define SERDES_START				BIT(0)
 #define PCS_START				BIT(1)
-#define PLL_READY_GATE_EN			BIT(3)
 /* QPHY_PCS_STATUS bit */
 #define PHYSTATUS				BIT(6)
 #define PHYSTATUS_4_20				BIT(7)
-/* QPHY_PCS_READY_STATUS & QPHY_COM_PCS_READY_STATUS bit */
-#define PCS_READY				BIT(0)
-
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET				BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX			BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET			BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX			BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE				BIT(0) /* enables USB3 mode */
-#define DP_MODE					BIT(1) /* enables DP mode */
 
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
-#define POWER_DOWN_DELAY_US_MIN			10
-#define POWER_DOWN_DELAY_US_MAX			11
-
-#define MAX_PROP_NAME				32
 
 /* Define the assumed distance between lanes for underspecified device trees. */
 #define QMP_PHY_LEGACY_LANE_STRIDE		0x400
@@ -109,11 +88,8 @@  enum qphy_reg_layout {
 	/* PCS registers */
 	QPHY_SW_RESET,
 	QPHY_START_CTRL,
-	QPHY_PCS_READY_STATUS,
 	QPHY_PCS_STATUS,
 	QPHY_PCS_POWER_DOWN_CONTROL,
-	/* PCS_MISC registers */
-	QPHY_PCS_MISC_TYPEC_CTRL,
 	/* Keep last to ensure regs_layout arrays are properly initialized */
 	QPHY_LAYOUT_SIZE
 };