diff mbox series

[v3,5/9] dt-bindings: mmc: sdhci-msm: Add pinctrl-1 property

Message ID 20220910143213.477261-6-iskren.chernev@gmail.com (mailing list archive)
State Superseded
Headers show
Series Add support for sm6115,4250 and OnePlus Nord N100 | expand

Commit Message

Iskren Chernev Sept. 10, 2022, 2:32 p.m. UTC
Most mmc blocks contain two pinctrls, default and sleep. But then
dt-schema complains about pinctrl-1 not being defined.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
 Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Krzysztof Kozlowski Sept. 11, 2022, 1:30 p.m. UTC | #1
On 10/09/2022 16:32, Iskren Chernev wrote:
> Most mmc blocks contain two pinctrls, default and sleep. But then
> dt-schema complains about pinctrl-1 not being defined.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
Bhupesh Sharma Sept. 12, 2022, 5 p.m. UTC | #2
On 9/10/22 8:02 PM, Iskren Chernev wrote:
> Most mmc blocks contain two pinctrls, default and sleep. But then
> dt-schema complains about pinctrl-1 not being defined.
> 
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
> ---
>   Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> index a792fa5574a0..775476d7f9f0 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> @@ -97,6 +97,10 @@ properties:
>       description:
>         Should specify pin control groups used for this controller.
>   
> +  pinctrl-1:
> +    description:
> +      Should specify sleep pin control groups used for this controller.
> +
>     resets:
>       maxItems: 1
>   

Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Thanks.
Ulf Hansson Sept. 14, 2022, 2 p.m. UTC | #3
On Sat, 10 Sept 2022 at 16:32, Iskren Chernev <iskren.chernev@gmail.com> wrote:
>
> Most mmc blocks contain two pinctrls, default and sleep. But then
> dt-schema complains about pinctrl-1 not being defined.
>
> Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> index a792fa5574a0..775476d7f9f0 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
> @@ -97,6 +97,10 @@ properties:
>      description:
>        Should specify pin control groups used for this controller.
>
> +  pinctrl-1:
> +    description:
> +      Should specify sleep pin control groups used for this controller.
> +
>    resets:
>      maxItems: 1
>
> --
> 2.37.2
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
index a792fa5574a0..775476d7f9f0 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -97,6 +97,10 @@  properties:
     description:
       Should specify pin control groups used for this controller.
 
+  pinctrl-1:
+    description:
+      Should specify sleep pin control groups used for this controller.
+
   resets:
     maxItems: 1