| Message ID | 20220915090515.1660-1-xuewen.yan@unisoc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh | expand |
Can someone familiar with the code please review this ? On 15-09-22, 17:05, Xuewen Yan wrote: > Before update thermal pressure, the max cpufreq should be limited. > Add QOS control for Lmh throttle cpufreq. > > Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> > --- > drivers/cpufreq/qcom-cpufreq-hw.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c > index d5ef3c66c762..deb1219435a5 100644 > --- a/drivers/cpufreq/qcom-cpufreq-hw.c > +++ b/drivers/cpufreq/qcom-cpufreq-hw.c > @@ -13,6 +13,7 @@ > #include <linux/of_address.h> > #include <linux/of_platform.h> > #include <linux/pm_opp.h> > +#include <linux/pm_qos.h> > #include <linux/slab.h> > #include <linux/spinlock.h> > #include <linux/units.h> > @@ -56,6 +57,8 @@ struct qcom_cpufreq_data { > struct cpufreq_policy *policy; > > bool per_core_dcvs; > + > + struct freq_qos_request throttle_freq_req; > }; > > static unsigned long cpu_hw_rate, xo_rate; > @@ -318,6 +321,8 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) > } else { > throttled_freq = freq_hz / HZ_PER_KHZ; > > + freq_qos_update_request(&data->throttle_freq_req, throttled_freq); > + > /* Update thermal pressure (the boost frequencies are accepted) */ > arch_update_thermal_pressure(policy->related_cpus, throttled_freq); > > @@ -413,6 +418,14 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) > if (data->throttle_irq < 0) > return data->throttle_irq; > > + ret = freq_qos_add_request(&policy->constraints, > + &data->throttle_freq_req, FREQ_QOS_MAX, > + FREQ_QOS_MAX_DEFAULT_VALUE); > + if (ret < 0) { > + dev_err(&pdev->dev, "Failed to add freq constraint (%d)\n", ret); > + return ret; > + } > + > data->cancel_throttle = false; > data->policy = policy; > > @@ -479,6 +492,7 @@ static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data) > if (data->throttle_irq <= 0) > return; > > + freq_qos_remove_request(&data->throttle_freq_req); > free_irq(data->throttle_irq, data); > }
On 15-09-22, 17:05, Xuewen Yan wrote: > Before update thermal pressure, the max cpufreq should be limited. > Add QOS control for Lmh throttle cpufreq. > > Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> > --- > drivers/cpufreq/qcom-cpufreq-hw.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) This doesn't apply cleanly over my tree anymore, can you please rebase and resend ? git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git cpufreq/arm/linux-next
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index d5ef3c66c762..deb1219435a5 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -13,6 +13,7 @@ #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/pm_opp.h> +#include <linux/pm_qos.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/units.h> @@ -56,6 +57,8 @@ struct qcom_cpufreq_data { struct cpufreq_policy *policy; bool per_core_dcvs; + + struct freq_qos_request throttle_freq_req; }; static unsigned long cpu_hw_rate, xo_rate; @@ -318,6 +321,8 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) } else { throttled_freq = freq_hz / HZ_PER_KHZ; + freq_qos_update_request(&data->throttle_freq_req, throttled_freq); + /* Update thermal pressure (the boost frequencies are accepted) */ arch_update_thermal_pressure(policy->related_cpus, throttled_freq); @@ -413,6 +418,14 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index) if (data->throttle_irq < 0) return data->throttle_irq; + ret = freq_qos_add_request(&policy->constraints, + &data->throttle_freq_req, FREQ_QOS_MAX, + FREQ_QOS_MAX_DEFAULT_VALUE); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to add freq constraint (%d)\n", ret); + return ret; + } + data->cancel_throttle = false; data->policy = policy; @@ -479,6 +492,7 @@ static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data) if (data->throttle_irq <= 0) return; + freq_qos_remove_request(&data->throttle_freq_req); free_irq(data->throttle_irq, data); }
Before update thermal pressure, the max cpufreq should be limited. Add QOS control for Lmh throttle cpufreq. Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com> --- drivers/cpufreq/qcom-cpufreq-hw.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)