diff mbox series

[4/9] arm64: dts: qcom: msm8996: change DSI PHY node name to generic one

Message ID 20220924090108.166934-5-dmitry.baryshkov@linaro.org (mailing list archive)
State Accepted
Headers show
Series arm: dts: qcom: rename DSI PHY nodes | expand

Commit Message

Dmitry Baryshkov Sept. 24, 2022, 9:01 a.m. UTC 
Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Krzysztof Kozlowski Sept. 24, 2022, 9:31 a.m. UTC | #1 
On 24/09/2022 11:01, Dmitry Baryshkov wrote:
> Change DSI PHY node names from custom 'dsi-phy' to the generic 'phy'.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 742eac4ce9b3..a7d0e5d68141 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1017,7 +1017,7 @@  dsi0_out: endpoint {
 				};
 			};
 
-			dsi0_phy: dsi-phy@994400 {
+			dsi0_phy: phy@994400 {
 				compatible = "qcom,dsi-phy-14nm";
 				reg = <0x00994400 0x100>,
 				      <0x00994500 0x300>,
@@ -1085,7 +1085,7 @@  dsi1_out: endpoint {
 				};
 			};
 
-			dsi1_phy: dsi-phy@996400 {
+			dsi1_phy: phy@996400 {
 				compatible = "qcom,dsi-phy-14nm";
 				reg = <0x00996400 0x100>,
 				      <0x00996500 0x300>,