| Message ID | 20220924123611.225520-2-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: display/msm: rework MDSS and DPU bindings | expand |
On Sat, 24 Sep 2022 15:36:00 +0300, Dmitry Baryshkov wrote: > Split Mobile Display SubSystem (MDSS) root node bindings to the separate > yaml file. Changes to the existing (txt) schema: > - Added optional "vbif_nrt_phys" region used by msm8996 > - Made "bus" and "vsync" clocks optional (they are not used by some > platforms) > - Added optional resets property referencing MDSS reset > - Defined child nodes pointing to corresponding reference schema. > - Dropped the "lut" clock. It was added to the schema by mistake (it is > a part of mdp4 schema, not the mdss). > > Reviewed-by: Rob Herring <robh@kernel.org> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > .../devicetree/bindings/display/msm/mdp5.txt | 30 +- > .../bindings/display/msm/qcom,mdss.yaml | 264 ++++++++++++++++++ > 2 files changed, 265 insertions(+), 29 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:0: 'byte' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:1: 'byte_intf' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:2: 'pixel' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:3: 'core' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:4: 'iface' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:5: 'bus' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: phy-names:0: 'dsi' was expected From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: 'power-domains' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: 'operating-points-v2' is a required property From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1681881 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
Hi, On Sat, 24 Sept 2022 at 20:23, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On Sat, 24 Sep 2022 15:36:00 +0300, Dmitry Baryshkov wrote: > > Split Mobile Display SubSystem (MDSS) root node bindings to the separate > > yaml file. Changes to the existing (txt) schema: > > - Added optional "vbif_nrt_phys" region used by msm8996 > > - Made "bus" and "vsync" clocks optional (they are not used by some > > platforms) > > - Added optional resets property referencing MDSS reset > > - Defined child nodes pointing to corresponding reference schema. > > - Dropped the "lut" clock. It was added to the schema by mistake (it is > > a part of mdp4 schema, not the mdss). > > > > Reviewed-by: Rob Herring <robh@kernel.org> > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > --- > > .../devicetree/bindings/display/msm/mdp5.txt | 30 +- > > .../bindings/display/msm/qcom,mdss.yaml | 264 ++++++++++++++++++ > > 2 files changed, 265 insertions(+), 29 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:0: 'byte' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:1: 'byte_intf' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:2: 'pixel' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:3: 'core' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:4: 'iface' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:5: 'bus' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: phy-names:0: 'dsi' was expected > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: 'power-domains' is a required property > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: 'operating-points-v2' is a required property > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml These are the errors generated by the dsi@ node from the example. The DSI schema is handled separately (by Bryan, added to the Cc list). Can we have a lifter for this patch? Or I can revert to dropping the dsi@ part from the example. > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/patch/1681881 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit.
On Sat, Sep 24, 2022 at 09:27:10PM +0300, Dmitry Baryshkov wrote: > Hi, > > On Sat, 24 Sept 2022 at 20:23, Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> wrote: > > > > On Sat, 24 Sep 2022 15:36:00 +0300, Dmitry Baryshkov wrote: > > > Split Mobile Display SubSystem (MDSS) root node bindings to the separate > > > yaml file. Changes to the existing (txt) schema: > > > - Added optional "vbif_nrt_phys" region used by msm8996 > > > - Made "bus" and "vsync" clocks optional (they are not used by some > > > platforms) > > > - Added optional resets property referencing MDSS reset > > > - Defined child nodes pointing to corresponding reference schema. > > > - Dropped the "lut" clock. It was added to the schema by mistake (it is > > > a part of mdp4 schema, not the mdss). > > > > > > Reviewed-by: Rob Herring <robh@kernel.org> > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > > > --- > > > .../devicetree/bindings/display/msm/mdp5.txt | 30 +- > > > .../bindings/display/msm/qcom,mdss.yaml | 264 ++++++++++++++++++ > > > 2 files changed, 265 insertions(+), 29 deletions(-) > > > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml > > > > > > > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > > > yamllint warnings/errors: > > > > dtschema/dtc warnings/errors: > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:0: 'byte' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:1: 'byte_intf' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:2: 'pixel' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:3: 'core' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:4: 'iface' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: clock-names:5: 'bus' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: phy-names:0: 'dsi' was expected > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: 'power-domains' is a required property > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,mdss.example.dtb: dsi@1a98000: 'operating-points-v2' is a required property > > From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml > > These are the errors generated by the dsi@ node from the example. The > DSI schema is handled separately (by Bryan, added to the Cc list). Can > we have a lifter for this patch? Or I can revert to dropping the dsi@ > part from the example. It's fine as long as I don't see them in linux-next. Rob
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 43d11279c925..65d03c58dee6 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -2,37 +2,9 @@ Qualcomm adreno/snapdragon MDP5 display controller Description: -This is the bindings documentation for the Mobile Display Subsytem(MDSS) that -encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display +This is the bindings documentation for the MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996. -MDSS: -Required properties: -- compatible: - * "qcom,mdss" - MDSS -- reg: Physical base address and length of the controller's registers. -- reg-names: The names of register regions. The following regions are required: - * "mdss_phys" - * "vbif_phys" -- interrupts: The interrupt signal from MDSS. -- interrupt-controller: identifies the node as an interrupt controller. -- #interrupt-cells: specifies the number of cells needed to encode an interrupt - source, should be 1. -- power-domains: a power domain consumer specifier according to - Documentation/devicetree/bindings/power/power_domain.txt -- clocks: device clocks. See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "iface" - * "bus" - * "vsync" -- #address-cells: number of address cells for the MDSS children. Should be 1. -- #size-cells: Should be 1. -- ranges: parent bus address space is the same as the child bus address space. - -Optional properties: -- clock-names: the following clocks are optional: - * "lut" - MDP5: Required properties: - compatible: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml new file mode 100644 index 000000000000..92a1cbae6d76 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Mobile Display SubSystem (MDSS) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> + - Rob Clark <robdclark@gmail.com> + +description: + This is the bindings documentation for the Mobile Display Subsytem(MDSS) that + encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc. + +properties: + compatible: + enum: + - qcom,mdss + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: mdss_phys + - const: vbif_phys + - const: vbif_nrt_phys + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + power-domains: + maxItems: 1 + description: | + The MDSS power domain provided by GCC + + clocks: + minItems: 1 + items: + - description: Display abh clock + - description: Display axi clock + - description: Display vsync clock + + clock-names: + minItems: 1 + items: + - const: iface + - const: bus + - const: vsync + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + resets: + items: + - description: MDSS_CORE reset + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - "#interrupt-cells" + - power-domains + - clocks + - clock-names + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "^mdp@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdp5 + + "^dsi@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + const: qcom,mdss-dsi-ctrl + + "^phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,dsi-phy-14nm + - qcom,dsi-phy-14nm-660 + - qcom,dsi-phy-14nm-8953 + - qcom,dsi-phy-20nm + - qcom,dsi-phy-28nm-hpm + - qcom,dsi-phy-28nm-lp + + "^hdmi-phy@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-phy-8084 + - qcom,hdmi-phy-8660 + - qcom,hdmi-phy-8960 + - qcom,hdmi-phy-8974 + - qcom,hdmi-phy-8996 + + "^hdmi-tx@[1-9a-f][0-9a-f]*$": + type: object + properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8916.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi@1a98000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "ref"; + vddio-supply = <&vreg_dsi_phy>; + }; + }; +...