| Message ID | 20220926074415.53100-3-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings | expand |
On 26.09.2022 09:43, Krzysztof Kozlowski wrote: > DT schema expects TLMM pin configuration nodes to be named with > '-state' suffix and their optional children with '-pins' suffix. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Konrad > arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 ++-- > arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++-- > 2 files changed, 4 insertions(+), 4 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts > index afc2dc79767d..e1fe7d598580 100644 > --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts > +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts > @@ -51,13 +51,13 @@ flash@0 { > }; > > &tlmm { > - i2c_1_pins: i2c-1-pins { > + i2c_1_pins: i2c-1-state { > pins = "gpio42", "gpio43"; > function = "blsp2_i2c"; > drive-strength = <8>; > }; > > - spi_0_pins: spi-0-pins { > + spi_0_pins: spi-0-state { > pins = "gpio38", "gpio39", "gpio40", "gpio41"; > function = "blsp1_spi"; > drive-strength = <8>; > diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > index a7c7ca980a71..9b9f778090e1 100644 > --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi > @@ -218,14 +218,14 @@ tlmm: pinctrl@1000000 { > interrupt-controller; > #interrupt-cells = <2>; > > - serial_3_pins: serial3-pinmux { > + serial_3_pins: serial3-state { > pins = "gpio44", "gpio45"; > function = "blsp2_uart"; > drive-strength = <8>; > bias-pull-down; > }; > > - qpic_pins: qpic-pins { > + qpic_pins: qpic-state { > pins = "gpio1", "gpio3", "gpio4", > "gpio5", "gpio6", "gpio7", > "gpio8", "gpio10", "gpio11",
diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts index afc2dc79767d..e1fe7d598580 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts @@ -51,13 +51,13 @@ flash@0 { }; &tlmm { - i2c_1_pins: i2c-1-pins { + i2c_1_pins: i2c-1-state { pins = "gpio42", "gpio43"; function = "blsp2_i2c"; drive-strength = <8>; }; - spi_0_pins: spi-0-pins { + spi_0_pins: spi-0-state { pins = "gpio38", "gpio39", "gpio40", "gpio41"; function = "blsp1_spi"; drive-strength = <8>; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index a7c7ca980a71..9b9f778090e1 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -218,14 +218,14 @@ tlmm: pinctrl@1000000 { interrupt-controller; #interrupt-cells = <2>; - serial_3_pins: serial3-pinmux { + serial_3_pins: serial3-state { pins = "gpio44", "gpio45"; function = "blsp2_uart"; drive-strength = <8>; bias-pull-down; }; - qpic_pins: qpic-pins { + qpic_pins: qpic-state { pins = "gpio1", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", "gpio8", "gpio10", "gpio11",
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 ++-- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)