| Message ID | 20220930185236.867655-4-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | ARM: dts: qcom: rework DT for apq8064, msm8960 and msm8660 | expand |
On 30/09/2022 20:52, Dmitry Baryshkov wrote: > The ext 3.3V regulator is not part of the SoC, so pull it from the SoC > node. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ++++++++++------------ > 1 file changed, 10 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts > index 50792f06855e..f718b37192e9 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts > @@ -57,18 +57,16 @@ hdmi_con: endpoint { > }; > }; > > - soc { > - ext_3p3v: regulator-fixed@1 { > - compatible = "regulator-fixed"; > - regulator-min-microvolt = <3300000>; > - regulator-max-microvolt = <3300000>; > - regulator-name = "ext_3p3v"; > - regulator-type = "voltage"; > - startup-delay-us = <0>; > - gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; > - enable-active-high; > - regulator-boot-on; > - }; > + ext_3p3v: regulator-ext-3p3v { > + compatible = "regulator-fixed"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "ext_3p3v"; > + regulator-type = "voltage"; > + startup-delay-us = <0>; > + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > }; > }; > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 50792f06855e..f718b37192e9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -57,18 +57,16 @@ hdmi_con: endpoint { }; }; - soc { - ext_3p3v: regulator-fixed@1 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "ext_3p3v"; - regulator-type = "voltage"; - startup-delay-us = <0>; - gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; + ext_3p3v: regulator-ext-3p3v { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "ext_3p3v"; + regulator-type = "voltage"; + startup-delay-us = <0>; + gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; }; };
The ext 3.3V regulator is not part of the SoC, so pull it from the SoC node. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-)