diff mbox series

[16/19] arm64: dts: qcom: qdru1000: Add gpi_dma nodes

Message ID 20221001030656.29365-17-quic_molvera@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add base device tree files for QDU1000/QRU1000 | expand

Commit Message

Melody Olvera Oct. 1, 2022, 3:06 a.m. UTC 
GPI DMA is used tof DMA operations for QUP devices, so add the two
gpi_dma instances on the QDU1000 and QRU1000 SoCs.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdru1000.dtsi | 45 ++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qdru1000.dtsi b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
index 5d3932ad67a1..c105bc15995b 100644
--- a/arch/arm64/boot/dts/qcom/qdru1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdru1000.dtsi
@@ -6,6 +6,7 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-qdru1000.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,qdru1000.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -225,6 +226,50 @@  gcc: clock-controller@80000 {
 			clock-names = "bi_tcxo", "sleep_clk";
 		};
 
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0x900000 0x0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0xf6 0x0>;
+			status = "ok";
+		};
+
+		gpi_dma1: dma-controller@a00000  {
+			compatible = "qcom,qdu1000-gpi-dma", "qcom,qru1000-gpi-dma";
+			#dma-cells = <5>;
+			reg = <0x0 0xa00000 0x0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <12>;
+			dma-channel-mask = <0x3f>;
+			iommus = <&apps_smmu 0x116 0x0>;
+			status = "ok";
+		};
+
 		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x9c0000 0x0 0x2000>;