diff mbox series

[v2,2/3] ARM: dts: qcom: Drop MMCI interrupt-names

Message ID 20221013221242.218808-2-marex@denx.de (mailing list archive)
State Accepted
Headers show
Series [v2,1/3] dt-bindings: mmc: arm,pl18x: Document interrupt-names is ignored | expand

Commit Message

Marek Vasut Oct. 13, 2022, 10:12 p.m. UTC
The pl18x MMCI driver does not use the interrupt-names property,
the binding document has been updated to recommend this property
be unused, remove it.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Yann Gautier <yann.gautier@foss.st.com>
Cc: devicetree@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
---
V2: Add RB from Linus
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 3 ---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 2 --
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 2 --
 arch/arm/boot/dts/qcom-msm8660.dtsi | 5 -----
 arch/arm/boot/dts/qcom-msm8960.dtsi | 2 --
 5 files changed, 14 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 942aa2278355d..ee258afaf296b 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1129,7 +1129,6 @@  sdcc1: mmc@12400000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -1147,7 +1146,6 @@  sdcc3: mmc@12180000 {
 				status = "disabled";
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -1165,7 +1163,6 @@  sdcc4: mmc@121c0000 {
 				status = "disabled";
 				reg = <0x121c0000 0x2000>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 90c08b51680aa..11b3104f01e1d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -728,7 +728,6 @@  sdcc3: mmc@12180000 {
 				status = "disabled";
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -748,7 +747,6 @@  sdcc1: mmc@12400000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index b47c86412de2c..0acbe62784be6 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -362,7 +362,6 @@  sdcc1: mmc@12180000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12180000 0x2000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -382,7 +381,6 @@  sdcc2: mmc@12140000 {
 				status = "disabled";
 				reg = <0x12140000 0x2000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index ddce7d64ba991..5133333da94ea 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -549,7 +549,6 @@  sdcc1: mmc@12400000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x8000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -565,7 +564,6 @@  sdcc2: mmc@12140000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12140000 0x8000>;
 				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -580,7 +578,6 @@  sdcc3: mmc@12180000 {
 				status = "disabled";
 				reg = <0x12180000 0x8000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -596,7 +593,6 @@  sdcc4: mmc@121c0000 {
 				status = "disabled";
 				reg = <0x121c0000 0x8000>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
@@ -611,7 +607,6 @@  sdcc5: mmc@12200000 {
 				status = "disabled";
 				reg = <0x12200000 0x8000>;
 				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index c5740da3754c7..9a7a4e38c23cd 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -308,7 +308,6 @@  sdcc1: mmc@12400000 {
 				arm,primecell-periphid = <0x00051180>;
 				reg = <0x12400000 0x8000>;
 				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <8>;
@@ -325,7 +324,6 @@  sdcc3: mmc@12180000 {
 				status = "disabled";
 				reg = <0x12180000 0x8000>;
 				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
 				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 				clock-names = "mclk", "apb_pclk";
 				bus-width = <4>;