diff mbox series

[v7,1/2] dt-bindings: input: document Qualcomm PMI8998 haptics driver

Message ID 20221015172915.1436236-2-caleb@connolly.tech (mailing list archive)
State Not Applicable
Headers show
Series input: introduce support for Qualcomm SPMI haptics | expand

Commit Message

Caleb Connolly Oct. 15, 2022, 5:30 p.m. UTC
Add bindings for qcom PMIC PMI8998 haptics driver.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 .../bindings/input/qcom,pmi8998-haptics.yaml  | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml

--
2.38.0

Comments

Krzysztof Kozlowski Oct. 16, 2022, 2:53 p.m. UTC | #1
On 15/10/2022 13:30, Caleb Connolly wrote:
> Add bindings for qcom PMIC PMI8998 haptics driver.
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Rob Herring (Arm) Oct. 16, 2022, 10:58 p.m. UTC | #2
On Sat, 15 Oct 2022 17:30:35 +0000, Caleb Connolly wrote:
> Add bindings for qcom PMIC PMI8998 haptics driver.
> 
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  .../bindings/input/qcom,pmi8998-haptics.yaml  | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.example.dtb: haptics@c000: 'qcom,wave-play-rate-us' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Caleb Connolly Oct. 18, 2022, 6:29 p.m. UTC | #3
On 15/10/2022 18:30, Caleb Connolly wrote:
> Add bindings for qcom PMIC PMI8998 haptics driver.
>
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>   .../bindings/input/qcom,pmi8998-haptics.yaml  | 73 +++++++++++++++++++
>   1 file changed, 73 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
> new file mode 100644
> index 000000000000..d43324cceb89
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2020 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/qcom,pmi8998-haptics.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm PMI8998/PM660 Haptics
> +
> +maintainers:
> +  - Caleb Connolly <caleb@connolly.tech>
> +
> +description: |
> +  Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant
> +  actuators and eccentric rotating mass type haptics commonly found in mobile devices.
> +  It supports multiple sources of wave data such as an internal buffer, direct play
> +  (from kernel or userspace) as well as an audio output mode.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - qcom,pmi8998-haptics
> +          - qcom,pm660-charger

I've just noticed this typo! Will respin and fix...

> +          - qcom,pmi8996-haptics
> +          - qcom,pmi8941-haptics
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: short
> +      - const: play
> +
> +  qcom,wave-play-duration-us:
> +    description: |
> +      Wave sample duration in microseconds, 1/f where f
> +      is the resonant frequency of the actuator.
> +      This property is named qcom,wave-play-rate-us in
> +      downstream kernels.
> +    minimum: 0
> +    maximum: 20475
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - qcom,wave-play-rate-us
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    spmi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      pmi8998_haptics: haptics@c000 {
> +        compatible = "qcom,pmi8998-haptics";
> +        reg = <0xc000>;
> +
> +        interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
> +                     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
> +        interrupt-names = "short", "play";
> +
> +        qcom,wave-play-rate-us = <4255>;
> +      };
> +    };
> --
> 2.38.0
>

--
Kind Regards,
Caleb
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
new file mode 100644
index 000000000000..d43324cceb89
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pmi8998-haptics.yaml
@@ -0,0 +1,73 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2020 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pmi8998-haptics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMI8998/PM660 Haptics
+
+maintainers:
+  - Caleb Connolly <caleb@connolly.tech>
+
+description: |
+  Qualcomm SPMI haptics is a peripheral on some QTI PMICs. It supports linear resonant
+  actuators and eccentric rotating mass type haptics commonly found in mobile devices.
+  It supports multiple sources of wave data such as an internal buffer, direct play
+  (from kernel or userspace) as well as an audio output mode.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pmi8998-haptics
+          - qcom,pm660-charger
+          - qcom,pmi8996-haptics
+          - qcom,pmi8941-haptics
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: short
+      - const: play
+
+  qcom,wave-play-duration-us:
+    description: |
+      Wave sample duration in microseconds, 1/f where f
+      is the resonant frequency of the actuator.
+      This property is named qcom,wave-play-rate-us in
+      downstream kernels.
+    minimum: 0
+    maximum: 20475
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - qcom,wave-play-rate-us
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spmi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmi8998_haptics: haptics@c000 {
+        compatible = "qcom,pmi8998-haptics";
+        reg = <0xc000>;
+
+        interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
+                     <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
+        interrupt-names = "short", "play";
+
+        qcom,wave-play-rate-us = <4255>;
+      };
+    };