diff mbox series

[v5,28/34] dt-bindings: pinctrl: qcom,sdx55: fix matching pin config

Message ID 20221016170035.35014-29-krzysztof.kozlowski@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series pinctrl/arm64: qcom: continued - fix Qualcomm TLMM pinctrl schema warnings (third set) | expand

Commit Message

Krzysztof Kozlowski Oct. 16, 2022, 5 p.m. UTC
The TLMM pin controller follows generic pin-controller bindings, so
should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
(level one and two) are not properly matched.

  qcom-sdx55-telit-fn980-tlb.dtb: pinctrl@f100000: 'pcie_ep_clkreq_default', 'pcie_ep_perst_default', 'pcie_ep_wake_default' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'

This method also unifies the bindings with other Qualcomm TLMM and LPASS
pinctrl bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/qcom,sdx55-pinctrl.yaml       | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Comments

Krzysztof Kozlowski Oct. 17, 2022, 8:08 p.m. UTC | #1
On Sun, 16 Oct 2022 13:00:29 -0400, Krzysztof Kozlowski wrote:
> The TLMM pin controller follows generic pin-controller bindings, so
> should have subnodes with '-state' and '-pins'.  Otherwise the subnodes
> (level one and two) are not properly matched.
> 
>   qcom-sdx55-telit-fn980-tlb.dtb: pinctrl@f100000: 'pcie_ep_clkreq_default', 'pcie_ep_perst_default', 'pcie_ep_wake_default' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
> 
> This method also unifies the bindings with other Qualcomm TLMM and LPASS
> pinctrl bindings.
> 
> [...]

Applied, thanks!

[28/34] dt-bindings: pinctrl: qcom,sdx55: fix matching pin config
        https://git.kernel.org/krzk/linux-dt/c/8cd7d9e14fd861c402ccdf243678439036ef7eeb

Best regards,
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
index a38090b14aab..fff57abf4fbc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -45,9 +45,17 @@  properties:
   gpio-reserved-ranges:
     maxItems: 1
 
-#PIN CONFIGURATION NODES
 patternProperties:
-  '-pins$':
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-sdx55-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-sdx55-tlmm-state:
     type: object
     description:
       Pinctrl node's client devices use subnodes for desired pin configuration.
@@ -146,7 +154,7 @@  examples:
                 #interrupt-cells = <2>;
                 interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
 
-                serial-pins {
+                serial-state {
                         pins = "gpio8", "gpio9";
                         function = "blsp_uart3";
                         drive-strength = <8>;