Message ID | 20221018021920.3747344-2-bryan.odonoghue@linaro.org (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
Series | i2c: qcom-cci: pm runtime ordering fix | expand |
On Tue, 18 Oct 2022 at 04:19, Bryan O'Donoghue <bryan.odonoghue@linaro.org> wrote: > > When we compile-in the CCI along with the imx412 driver and run on the RB5 > we see that i2c_add_adapter() causes the probe of the imx412 driver to > happen. > > This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c > fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has > not completed to pm_runtime_enable(dev). > > Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding > the i2c adapter. > > Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") > Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > Cc: <stable@vger.kernel.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> > --- > drivers/i2c/busses/i2c-qcom-cci.c | 13 ++++++++----- > 1 file changed, 8 insertions(+), 5 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c > index 87739fb4388b..a4b97fe3c3a5 100644 > --- a/drivers/i2c/busses/i2c-qcom-cci.c > +++ b/drivers/i2c/busses/i2c-qcom-cci.c > @@ -639,6 +639,11 @@ static int cci_probe(struct platform_device *pdev) > if (ret < 0) > goto error; > > + pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); > + pm_runtime_use_autosuspend(dev); > + pm_runtime_set_active(dev); > + pm_runtime_enable(dev); > + > for (i = 0; i < cci->data->num_masters; i++) { > if (!cci->master[i].cci) > continue; > @@ -650,14 +655,12 @@ static int cci_probe(struct platform_device *pdev) > } > } > > - pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); > - pm_runtime_use_autosuspend(dev); > - pm_runtime_set_active(dev); > - pm_runtime_enable(dev); > - > return 0; > > error_i2c: > + pm_runtime_disable(dev); > + pm_runtime_dont_use_autosuspend(dev); > + > for (--i ; i >= 0; i--) { > if (cci->master[i].cci) { > i2c_del_adapter(&cci->master[i].adap); > -- > 2.34.1 > Reviewed-by: Robert Foss <robert.foss@linaro.org>
On Tue, Oct 18, 2022 at 03:19:20AM +0100, Bryan O'Donoghue wrote: > When we compile-in the CCI along with the imx412 driver and run on the RB5 > we see that i2c_add_adapter() causes the probe of the imx412 driver to > happen. > > This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c > fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has > not completed to pm_runtime_enable(dev). > > Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding > the i2c adapter. > > Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") > Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> > Cc: <stable@vger.kernel.org> > Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Applied to for-current, thanks!
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index 87739fb4388b..a4b97fe3c3a5 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -639,6 +639,11 @@ static int cci_probe(struct platform_device *pdev) if (ret < 0) goto error; + pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); + pm_runtime_use_autosuspend(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + for (i = 0; i < cci->data->num_masters; i++) { if (!cci->master[i].cci) continue; @@ -650,14 +655,12 @@ static int cci_probe(struct platform_device *pdev) } } - pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); - pm_runtime_use_autosuspend(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - return 0; error_i2c: + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); + for (--i ; i >= 0; i--) { if (cci->master[i].cci) { i2c_del_adapter(&cci->master[i].adap);