| Message ID | 20221026200429.162212-5-quic_molvera@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add base device tree files for QDU1000/QRU1000 | expand |
On 26/10/2022 16:04, Melody Olvera wrote: > Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 > SoCs. > > Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 2 + > arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 245 +++++++++++++++++++++++ > arch/arm64/boot/dts/qcom/qru1000-idp.dts | 245 +++++++++++++++++++++++ > 3 files changed, 492 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts > create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index b0558d3389e5..8ee949a58ce7 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb > diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts > new file mode 100644 > index 000000000000..e4fd6e2b656b > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts > @@ -0,0 +1,245 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qdu1000.dtsi" > +#include "pm8150.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; > + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + clocks { > + xo_board: xo-board { > + compatible = "fixed-clock"; > + clock-frequency = <19200000>; > + clock-output-names = "xo_board"; > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + ppvar_sys: ppvar-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ppvar_sys"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&ppvar_sys>; > + }; > +}; > + > +&apps_rsc { > + regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; > + vdd-l2-l10-supply = <&vph_pwr>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; > + vdd-l6-l9-supply = <&vreg_s6a_0p9>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; > + vdd-l13-l16-l17-supply = <&vph_pwr>; > + > + vreg_s2a_0p5: smps2 { > + regulator-name = "vreg_s2a_0p5"; > + regulator-min-microvolt = <320000>; > + regulator-max-microvolt = <570000>; > + }; > + > + vreg_s3a_1p05: smps3 { > + regulator-name = "vreg_s3a_1p05"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1170000>; > + }; > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-name = "vreg_s5a_2p0"; > + regulator-min-microvolt = <1904000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + vreg_s6a_0p9: smps6 { > + regulator-name = "vreg_s6a_0p9"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s7a_1p2: smps7 { > + regulator-name = "vreg_s7a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + vreg_s8a_1p3: smps8 { > + regulator-name = "vreg_s8a_1p3"; > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + }; > + > + vreg_l1a_0p91: ldo1 { > + regulator-name = "vreg_l1a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l2a_2p3: ldo2 { > + regulator-name = "vreg_l2a_2p3"; > + regulator-min-microvolt = <2970000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l3a_1p2: ldo3 { > + regulator-name = "vreg_l3a_1p2"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1260000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l5a_0p8: ldo5 { > + regulator-name = "vreg_l5a_0p8"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l6a_0p91: ldo6 { > + regulator-name = "vreg_l6a_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-name = "vreg_l7a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + > + }; > + > + vreg_l8a_0p91: ldo8 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <888000>; > + regulator-max-microvolt = <925000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l9a_0p91: ldo9 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l10a_2p95: ldo10 { > + regulator-name = "vreg_l10a_2p95"; > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l11a_0p91: ldo11 { > + regulator-name = "vreg_l11a_0p91"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <1950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-name = "vreg_l15a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l16a_1p8: ldo16 { > + regulator-name = "vreg_l16a_1p8"; > + regulator-min-microvolt = <1710000>; > + regulator-max-microvolt = <1890000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l17a_3p3: ldo17 { > + regulator-name = "vreg_l17a_3p3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l18a_1p2: ldo18 { > + regulator-name = "vreg_l18a_1p2"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&uart7 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts > new file mode 100644 > index 000000000000..445124e84485 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts > @@ -0,0 +1,245 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "qru1000.dtsi" > +#include "pm8150.dtsi" > + > +/ { > + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; > + compatible = "qcom,qru1000-idp", "qcom,qru1000"; > + > + aliases { > + serial0 = &uart7; > + }; > + > + clocks { > + xo_board: xo-board { > + compatible = "fixed-clock"; > + clock-frequency = <19200000>; > + clock-output-names = "xo_board"; > + #clock-cells = <0>; > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + clock-frequency = <32000>; > + #clock-cells = <0>; > + }; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + ppvar_sys: ppvar-sys-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ppvar_sys"; > + regulator-always-on; > + regulator-boot-on; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&ppvar_sys>; > + }; > +}; > + > +&apps_rsc { > + regulators { > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + > + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; > + vdd-l2-l10-supply = <&vph_pwr>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; > + vdd-l6-l9-supply = <&vreg_s6a_0p9>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; > + vdd-l13-l16-l17-supply = <&vph_pwr>; > + > + vreg_s2a_0p5: smps2 { > + regulator-name = "vreg_s2a_0p5"; > + regulator-min-microvolt = <320000>; > + regulator-max-microvolt = <570000>; > + }; > + > + vreg_s3a_1p05: smps3 { > + regulator-name = "vreg_s3a_1p05"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1170000>; > + }; > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vreg_s5a_2p0: smps5 { > + regulator-name = "vreg_s5a_2p0"; > + regulator-min-microvolt = <1904000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + vreg_s6a_0p9: smps6 { > + regulator-name = "vreg_s6a_0p9"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1128000>; > + }; > + > + vreg_s7a_1p2: smps7 { > + regulator-name = "vreg_s7a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + vreg_s8a_1p3: smps8 { > + regulator-name = "vreg_s8a_1p3"; > + regulator-min-microvolt = <1352000>; > + regulator-max-microvolt = <1352000>; > + }; > + > + vreg_l1a_0p91: ldo1 { > + regulator-name = "vreg_l1a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l2a_2p3: ldo2 { > + regulator-name = "vreg_l2a_2p3"; > + regulator-min-microvolt = <2970000>; > + regulator-max-microvolt = <3300000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l3a_1p2: ldo3 { > + regulator-name = "vreg_l3a_1p2"; > + regulator-min-microvolt = <920000>; > + regulator-max-microvolt = <1260000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l5a_0p8: ldo5 { > + regulator-name = "vreg_l5a_0p8"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l6a_0p91: ldo6 { > + regulator-name = "vreg_l6a_0p91"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-name = "vreg_l7a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + > + }; > + > + vreg_l8a_0p91: ldo8 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <888000>; > + regulator-max-microvolt = <925000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l9a_0p91: ldo9 { > + regulator-name = "vreg_l8a_0p91"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l10a_2p95: ldo10 { > + regulator-name = "vreg_l10a_2p95"; > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l11a_0p91: ldo11 { > + regulator-name = "vreg_l11a_0p91"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1650000>; > + regulator-max-microvolt = <1950000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-name = "vreg_l15a_1p8"; > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <2000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l16a_1p8: ldo16 { > + regulator-name = "vreg_l16a_1p8"; > + regulator-min-microvolt = <1710000>; > + regulator-max-microvolt = <1890000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l17a_3p3: ldo17 { > + regulator-name = "vreg_l17a_3p3"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3544000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + > + vreg_l18a_1p2: ldo18 { > + regulator-name = "vreg_l18a_1p2"; > + regulator-min-microvolt = <312000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; > + }; > + }; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&uart7 { > + status = "okay"; > +}; Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index b0558d3389e5..8ee949a58ce7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -51,7 +51,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts new file mode 100644 index 000000000000..e4fd6e2b656b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qdu1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QDU1000 IDP"; + compatible = "qcom,qdu1000-idp", "qcom,qdu1000"; + + aliases { + serial0 = &uart7; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts new file mode 100644 index 000000000000..445124e84485 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qru1000.dtsi" +#include "pm8150.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. QRU1000 IDP"; + compatible = "qcom,qru1000-idp", "qcom,qru1000"; + + aliases { + serial0 = &uart7; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; +}; + +&apps_rsc { + regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vph_pwr>; + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; + vdd-l6-l9-supply = <&vreg_s6a_0p9>; + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; + vdd-l13-l16-l17-supply = <&vph_pwr>; + + vreg_s2a_0p5: smps2 { + regulator-name = "vreg_s2a_0p5"; + regulator-min-microvolt = <320000>; + regulator-max-microvolt = <570000>; + }; + + vreg_s3a_1p05: smps3 { + regulator-name = "vreg_s3a_1p05"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-name = "vreg_s5a_2p0"; + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-name = "vreg_s6a_0p9"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s7a_1p2: smps7 { + regulator-name = "vreg_s7a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_s8a_1p3: smps8 { + regulator-name = "vreg_s8a_1p3"; + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1a_0p91: ldo1 { + regulator-name = "vreg_l1a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_2p3: ldo2 { + regulator-name = "vreg_l2a_2p3"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p2: ldo3 { + regulator-name = "vreg_l3a_1p2"; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-name = "vreg_l5a_0p8"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p91: ldo6 { + regulator-name = "vreg_l6a_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-name = "vreg_l7a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + + }; + + vreg_l8a_0p91: ldo8 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <888000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p91: ldo9 { + regulator-name = "vreg_l8a_0p91"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_2p95: ldo10 { + regulator-name = "vreg_l10a_2p95"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_0p91: ldo11 { + regulator-name = "vreg_l11a_0p91"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_1p8: ldo16 { + regulator-name = "vreg_l16a_1p8"; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p3: ldo17 { + regulator-name = "vreg_l17a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_1p2: ldo18 { + regulator-name = "vreg_l18a_1p2"; + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +};
Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000 SoCs. Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> --- arch/arm64/boot/dts/qcom/Makefile | 2 + arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 245 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qru1000-idp.dts | 245 +++++++++++++++++++++++ 3 files changed, 492 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts