@@ -1289,10 +1289,10 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_rx_tbl[] = {
};
static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_tbl[] = {
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x16),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG3, 0x22),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_G3S2_PRE_GAIN, 0x2e),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_EQ_CONFIG4, 0x16),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_EQ_CONFIG5, 0x22),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_G3S2_PRE_GAIN, 0x2e),
+ QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_RX_SIGDET_LVL, 0x99),
};
static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_pcs_misc_tbl[] = {
new file mode 100644
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V5_20_H_
+#define QCOM_PHY_QMP_PCS_V5_20_H_
+
+#define QPHY_V5_20_PCS_G3S2_PRE_GAIN 0x170
+#define QPHY_V5_20_PCS_RX_SIGDET_LVL 0x188
+#define QPHY_V5_20_PCS_EQ_CONFIG4 0x1e0
+#define QPHY_V5_20_PCS_EQ_CONFIG5 0x1e4
+
+#endif
@@ -38,6 +38,7 @@
#include "phy-qcom-qmp-pcs-pcie-v4_20.h"
#include "phy-qcom-qmp-pcs-v5.h"
+#include "phy-qcom-qmp-pcs-v5_20.h"
#include "phy-qcom-qmp-pcs-pcie-v5.h"
#include "phy-qcom-qmp-pcs-usb-v5.h"
#include "phy-qcom-qmp-pcs-ufs-v5.h"
sm8450_qmp_gen4x2_pcie_pcs_tbl[] contains the init sequence for PCS registers of QMP PHY v5.20. So use the v5.20 specific register names. Only major change is the rename of PCS_EQ_CONFIG{2/3} registers to PCS_EQ_CONFIG{4/5}. Fixes: 2c91bf6bf290 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Changes in v2: * New patch drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 8 ++++---- drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h | 14 ++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + 3 files changed, 19 insertions(+), 4 deletions(-) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5_20.h