| Message ID | 20221110210706.80301-1-konrad.dybcio@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | regulator: qcom-rpmh: Fix PMR735a S3 regulator spec | expand |
On 10/11/2022 22:07, Konrad Dybcio wrote: > PMR735a has a wider range than previously defined. Fix it. > > Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support") > Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> > --- Leaving this in to avoid confusion: Please note this is different to the recently merged patch (that one was for the SMD regulator driver). Konrad > drivers/regulator/qcom-rpmh-regulator.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c > index 4158ff126a67..f90bcdeecea5 100644 > --- a/drivers/regulator/qcom-rpmh-regulator.c > +++ b/drivers/regulator/qcom-rpmh-regulator.c > @@ -1187,7 +1187,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = { > static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = { > RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps520, "vdd-s1"), > RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"), > - RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"), > + RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps515, "vdd-s3"), > RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"), > RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"), > RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
On Thu, 10 Nov 2022 22:07:05 +0100, Konrad Dybcio wrote: > PMR735a has a wider range than previously defined. Fix it. > > Applied to broonie/regulator.git for-next Thanks! [1/1] regulator: qcom-rpmh: Fix PMR735a S3 regulator spec commit: dd801b2265c81bf0c8b0b4b8f7c1e7bfed078403 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 4158ff126a67..f90bcdeecea5 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -1187,7 +1187,7 @@ static const struct rpmh_vreg_init_data pm7325_vreg_data[] = { static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = { RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps520, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"), - RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"), + RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps515, "vdd-s3"), RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"), RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"), RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
PMR735a has a wider range than previously defined. Fix it. Fixes: c4e5aa3dbee5 ("regulator: qcom-rpmh: Add PM7325/PMR735A regulator support") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/regulator/qcom-rpmh-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)