| Message ID | 20221116104716.2583320-8-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | clk: qcom: Add support for SM8550 | expand |
On 16/11/2022 11:47, Abel Vesa wrote: > Adds the RPMH clocks present in SM8550 SoC. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/clk/qcom/clk-rpmh.c | 110 +++++++++++++++++++++++++++++------- > 1 file changed, 90 insertions(+), 20 deletions(-) > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c > index 1da45a6e2f29..63975490ab54 100644 > --- a/drivers/clk/qcom/clk-rpmh.c > +++ b/drivers/clk/qcom/clk-rpmh.c > @@ -579,6 +579,73 @@ static const struct clk_rpmh_desc clk_rpmh_sm8450 = { > .num_clks = ARRAY_SIZE(sm8450_rpmh_clocks), > }; > > +#define DEFINE_CLK_RPMH_FIXED(_platform, _name, _name_active, \ > + _parent_name, _name_active_parent, \ > + _div) \ > + static struct clk_fixed_factor _platform##_##_name = { \ > + .mult = 1, \ > + .div = _div, \ > + .hw.init = &(struct clk_init_data){ \ > + .ops = &clk_fixed_factor_ops, \ > + .name = #_name, \ > + .parent_data = &(const struct clk_parent_data){ \ > + .fw_name = #_parent_name, \ > + .name = #_parent_name, \ No need to introduce .name if we do DT properly from the get-go, I think Konrad > + }, \ > + .num_parents = 1, \ > + }, \ > + }; \ > + static struct clk_fixed_factor _platform##_##_name_active = { \ > + .mult = 1, \ > + .div = _div, \ > + .hw.init = &(struct clk_init_data){ \ > + .ops = &clk_fixed_factor_ops, \ > + .name = #_name_active, \ > + .parent_data = &(const struct clk_parent_data){ \ > + .fw_name = #_name_active_parent,\ > + .name = #_name_active_parent, \ > + }, \ > + .num_parents = 1, \ > + }, \ > + } > + > +DEFINE_CLK_RPMH_ARC(sm8550, xo_pad, xo_pad_ao, "xo.lvl", 0x03, 2); > +DEFINE_CLK_RPMH_FIXED(sm8550, bi_tcxo, bi_tcxo_ao, xo_pad, xo_pad_ao, 2); > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk1, rf_clk1_ao, "clka1", 1); > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk2, rf_clk2_ao, "clka2", 1); > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk3, rf_clk3_ao, "clka3", 1); > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk4, rf_clk4_ao, "clka4", 1); > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk1, ln_bb_clk1_ao, "clka6", 2); > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk2, ln_bb_clk2_ao, "clka7", 2); > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk3, ln_bb_clk3_ao, "clka8", 2); > + > +static struct clk_hw *sm8550_rpmh_clocks[] = { > + [RPMH_CXO_PAD_CLK] = &sm8550_xo_pad.hw, > + [RPMH_CXO_PAD_CLK_A] = &sm8550_xo_pad_ao.hw, > + [RPMH_CXO_CLK] = &sm8550_bi_tcxo.hw, > + [RPMH_CXO_CLK_A] = &sm8550_bi_tcxo_ao.hw, > + [RPMH_LN_BB_CLK1] = &sm8550_ln_bb_clk1.hw, > + [RPMH_LN_BB_CLK1_A] = &sm8550_ln_bb_clk1_ao.hw, > + [RPMH_LN_BB_CLK2] = &sm8550_ln_bb_clk2.hw, > + [RPMH_LN_BB_CLK2_A] = &sm8550_ln_bb_clk2_ao.hw, > + [RPMH_LN_BB_CLK3] = &sm8550_ln_bb_clk3.hw, > + [RPMH_LN_BB_CLK3_A] = &sm8550_ln_bb_clk3_ao.hw, > + [RPMH_RF_CLK1] = &sm8550_rf_clk1.hw, > + [RPMH_RF_CLK1_A] = &sm8550_rf_clk1_ao.hw, > + [RPMH_RF_CLK2] = &sm8550_rf_clk2.hw, > + [RPMH_RF_CLK2_A] = &sm8550_rf_clk2_ao.hw, > + [RPMH_RF_CLK3] = &sm8550_rf_clk3.hw, > + [RPMH_RF_CLK3_A] = &sm8550_rf_clk3_ao.hw, > + [RPMH_RF_CLK4] = &sm8550_rf_clk4.hw, > + [RPMH_RF_CLK4_A] = &sm8550_rf_clk4_ao.hw, > + [RPMH_IPA_CLK] = &sdm845_ipa.hw, > +}; > + > +static const struct clk_rpmh_desc clk_rpmh_sm8550 = { > + .clks = sm8550_rpmh_clocks, > + .num_clks = ARRAY_SIZE(sm8550_rpmh_clocks), > +}; > + > static struct clk_hw *sc7280_rpmh_clocks[] = { > [RPMH_CXO_CLK] = &sc7280_bi_tcxo.hw, > [RPMH_CXO_CLK_A] = &sc7280_bi_tcxo_ao.hw, > @@ -694,29 +761,31 @@ static int clk_rpmh_probe(struct platform_device *pdev) > > name = hw_clks[i]->init->name; > > - rpmh_clk = to_clk_rpmh(hw_clks[i]); > - res_addr = cmd_db_read_addr(rpmh_clk->res_name); > - if (!res_addr) { > - dev_err(&pdev->dev, "missing RPMh resource address for %s\n", > - rpmh_clk->res_name); > - return -ENODEV; > - } > + if (hw_clks[i]->init->ops != &clk_fixed_factor_ops) { > + rpmh_clk = to_clk_rpmh(hw_clks[i]); > + res_addr = cmd_db_read_addr(rpmh_clk->res_name); > + if (!res_addr) { > + dev_err(&pdev->dev, "missing RPMh resource address for %s\n", > + rpmh_clk->res_name); > + return -ENODEV; > + } > > - data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len); > - if (IS_ERR(data)) { > - ret = PTR_ERR(data); > - dev_err(&pdev->dev, > - "error reading RPMh aux data for %s (%d)\n", > - rpmh_clk->res_name, ret); > - return ret; > - } > + data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len); > + if (IS_ERR(data)) { > + ret = PTR_ERR(data); > + dev_err(&pdev->dev, > + "error reading RPMh aux data for %s (%d)\n", > + rpmh_clk->res_name, ret); > + return ret; > + } > > - /* Convert unit from Khz to Hz */ > - if (aux_data_len == sizeof(*data)) > - rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL; > + /* Convert unit from Khz to Hz */ > + if (aux_data_len == sizeof(*data)) > + rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL; > > - rpmh_clk->res_addr += res_addr; > - rpmh_clk->dev = &pdev->dev; > + rpmh_clk->res_addr += res_addr; > + rpmh_clk->dev = &pdev->dev; > + } > > ret = devm_clk_hw_register(&pdev->dev, hw_clks[i]); > if (ret) { > @@ -752,6 +821,7 @@ static const struct of_device_id clk_rpmh_match_table[] = { > { .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250}, > { .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350}, > { .compatible = "qcom,sm8450-rpmh-clk", .data = &clk_rpmh_sm8450}, > + { .compatible = "qcom,sm8550-rpmh-clk", .data = &clk_rpmh_sm8550}, > { .compatible = "qcom,sc7280-rpmh-clk", .data = &clk_rpmh_sc7280}, > { } > };
On 22-11-16 12:27:16, Konrad Dybcio wrote: > > > On 16/11/2022 11:47, Abel Vesa wrote: > > Adds the RPMH clocks present in SM8550 SoC. > > > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > > --- > > drivers/clk/qcom/clk-rpmh.c | 110 +++++++++++++++++++++++++++++------- > > 1 file changed, 90 insertions(+), 20 deletions(-) > > > > diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c > > index 1da45a6e2f29..63975490ab54 100644 > > --- a/drivers/clk/qcom/clk-rpmh.c > > +++ b/drivers/clk/qcom/clk-rpmh.c > > @@ -579,6 +579,73 @@ static const struct clk_rpmh_desc clk_rpmh_sm8450 = { > > .num_clks = ARRAY_SIZE(sm8450_rpmh_clocks), > > }; > > +#define DEFINE_CLK_RPMH_FIXED(_platform, _name, _name_active, \ > > + _parent_name, _name_active_parent, \ > > + _div) \ > > + static struct clk_fixed_factor _platform##_##_name = { \ > > + .mult = 1, \ > > + .div = _div, \ > > + .hw.init = &(struct clk_init_data){ \ > > + .ops = &clk_fixed_factor_ops, \ > > + .name = #_name, \ > > + .parent_data = &(const struct clk_parent_data){ \ > > + .fw_name = #_parent_name, \ > > + .name = #_parent_name, \ > No need to introduce .name if we do DT properly from the get-go, I think Sure. Will drop it. Will also move the define up, close to the other ones. Thanks, Abel > > > Konrad > > + }, \ > > + .num_parents = 1, \ > > + }, \ > > + }; \ > > + static struct clk_fixed_factor _platform##_##_name_active = { \ > > + .mult = 1, \ > > + .div = _div, \ > > + .hw.init = &(struct clk_init_data){ \ > > + .ops = &clk_fixed_factor_ops, \ > > + .name = #_name_active, \ > > + .parent_data = &(const struct clk_parent_data){ \ > > + .fw_name = #_name_active_parent,\ > > + .name = #_name_active_parent, \ > > + }, \ > > + .num_parents = 1, \ > > + }, \ > > + } > > + > > +DEFINE_CLK_RPMH_ARC(sm8550, xo_pad, xo_pad_ao, "xo.lvl", 0x03, 2); > > +DEFINE_CLK_RPMH_FIXED(sm8550, bi_tcxo, bi_tcxo_ao, xo_pad, xo_pad_ao, 2); > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk1, rf_clk1_ao, "clka1", 1); > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk2, rf_clk2_ao, "clka2", 1); > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk3, rf_clk3_ao, "clka3", 1); > > +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk4, rf_clk4_ao, "clka4", 1); > > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk1, ln_bb_clk1_ao, "clka6", 2); > > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk2, ln_bb_clk2_ao, "clka7", 2); > > +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk3, ln_bb_clk3_ao, "clka8", 2); > > + > > +static struct clk_hw *sm8550_rpmh_clocks[] = { > > + [RPMH_CXO_PAD_CLK] = &sm8550_xo_pad.hw, > > + [RPMH_CXO_PAD_CLK_A] = &sm8550_xo_pad_ao.hw, > > + [RPMH_CXO_CLK] = &sm8550_bi_tcxo.hw, > > + [RPMH_CXO_CLK_A] = &sm8550_bi_tcxo_ao.hw, > > + [RPMH_LN_BB_CLK1] = &sm8550_ln_bb_clk1.hw, > > + [RPMH_LN_BB_CLK1_A] = &sm8550_ln_bb_clk1_ao.hw, > > + [RPMH_LN_BB_CLK2] = &sm8550_ln_bb_clk2.hw, > > + [RPMH_LN_BB_CLK2_A] = &sm8550_ln_bb_clk2_ao.hw, > > + [RPMH_LN_BB_CLK3] = &sm8550_ln_bb_clk3.hw, > > + [RPMH_LN_BB_CLK3_A] = &sm8550_ln_bb_clk3_ao.hw, > > + [RPMH_RF_CLK1] = &sm8550_rf_clk1.hw, > > + [RPMH_RF_CLK1_A] = &sm8550_rf_clk1_ao.hw, > > + [RPMH_RF_CLK2] = &sm8550_rf_clk2.hw, > > + [RPMH_RF_CLK2_A] = &sm8550_rf_clk2_ao.hw, > > + [RPMH_RF_CLK3] = &sm8550_rf_clk3.hw, > > + [RPMH_RF_CLK3_A] = &sm8550_rf_clk3_ao.hw, > > + [RPMH_RF_CLK4] = &sm8550_rf_clk4.hw, > > + [RPMH_RF_CLK4_A] = &sm8550_rf_clk4_ao.hw, > > + [RPMH_IPA_CLK] = &sdm845_ipa.hw, > > +}; > > + > > +static const struct clk_rpmh_desc clk_rpmh_sm8550 = { > > + .clks = sm8550_rpmh_clocks, > > + .num_clks = ARRAY_SIZE(sm8550_rpmh_clocks), > > +}; > > + > > static struct clk_hw *sc7280_rpmh_clocks[] = { > > [RPMH_CXO_CLK] = &sc7280_bi_tcxo.hw, > > [RPMH_CXO_CLK_A] = &sc7280_bi_tcxo_ao.hw, > > @@ -694,29 +761,31 @@ static int clk_rpmh_probe(struct platform_device *pdev) > > name = hw_clks[i]->init->name; > > - rpmh_clk = to_clk_rpmh(hw_clks[i]); > > - res_addr = cmd_db_read_addr(rpmh_clk->res_name); > > - if (!res_addr) { > > - dev_err(&pdev->dev, "missing RPMh resource address for %s\n", > > - rpmh_clk->res_name); > > - return -ENODEV; > > - } > > + if (hw_clks[i]->init->ops != &clk_fixed_factor_ops) { > > + rpmh_clk = to_clk_rpmh(hw_clks[i]); > > + res_addr = cmd_db_read_addr(rpmh_clk->res_name); > > + if (!res_addr) { > > + dev_err(&pdev->dev, "missing RPMh resource address for %s\n", > > + rpmh_clk->res_name); > > + return -ENODEV; > > + } > > - data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len); > > - if (IS_ERR(data)) { > > - ret = PTR_ERR(data); > > - dev_err(&pdev->dev, > > - "error reading RPMh aux data for %s (%d)\n", > > - rpmh_clk->res_name, ret); > > - return ret; > > - } > > + data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len); > > + if (IS_ERR(data)) { > > + ret = PTR_ERR(data); > > + dev_err(&pdev->dev, > > + "error reading RPMh aux data for %s (%d)\n", > > + rpmh_clk->res_name, ret); > > + return ret; > > + } > > - /* Convert unit from Khz to Hz */ > > - if (aux_data_len == sizeof(*data)) > > - rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL; > > + /* Convert unit from Khz to Hz */ > > + if (aux_data_len == sizeof(*data)) > > + rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL; > > - rpmh_clk->res_addr += res_addr; > > - rpmh_clk->dev = &pdev->dev; > > + rpmh_clk->res_addr += res_addr; > > + rpmh_clk->dev = &pdev->dev; > > + } > > ret = devm_clk_hw_register(&pdev->dev, hw_clks[i]); > > if (ret) { > > @@ -752,6 +821,7 @@ static const struct of_device_id clk_rpmh_match_table[] = { > > { .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250}, > > { .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350}, > > { .compatible = "qcom,sm8450-rpmh-clk", .data = &clk_rpmh_sm8450}, > > + { .compatible = "qcom,sm8550-rpmh-clk", .data = &clk_rpmh_sm8550}, > > { .compatible = "qcom,sc7280-rpmh-clk", .data = &clk_rpmh_sc7280}, > > { } > > };
diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c index 1da45a6e2f29..63975490ab54 100644 --- a/drivers/clk/qcom/clk-rpmh.c +++ b/drivers/clk/qcom/clk-rpmh.c @@ -579,6 +579,73 @@ static const struct clk_rpmh_desc clk_rpmh_sm8450 = { .num_clks = ARRAY_SIZE(sm8450_rpmh_clocks), }; +#define DEFINE_CLK_RPMH_FIXED(_platform, _name, _name_active, \ + _parent_name, _name_active_parent, \ + _div) \ + static struct clk_fixed_factor _platform##_##_name = { \ + .mult = 1, \ + .div = _div, \ + .hw.init = &(struct clk_init_data){ \ + .ops = &clk_fixed_factor_ops, \ + .name = #_name, \ + .parent_data = &(const struct clk_parent_data){ \ + .fw_name = #_parent_name, \ + .name = #_parent_name, \ + }, \ + .num_parents = 1, \ + }, \ + }; \ + static struct clk_fixed_factor _platform##_##_name_active = { \ + .mult = 1, \ + .div = _div, \ + .hw.init = &(struct clk_init_data){ \ + .ops = &clk_fixed_factor_ops, \ + .name = #_name_active, \ + .parent_data = &(const struct clk_parent_data){ \ + .fw_name = #_name_active_parent,\ + .name = #_name_active_parent, \ + }, \ + .num_parents = 1, \ + }, \ + } + +DEFINE_CLK_RPMH_ARC(sm8550, xo_pad, xo_pad_ao, "xo.lvl", 0x03, 2); +DEFINE_CLK_RPMH_FIXED(sm8550, bi_tcxo, bi_tcxo_ao, xo_pad, xo_pad_ao, 2); +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk1, rf_clk1_ao, "clka1", 1); +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk2, rf_clk2_ao, "clka2", 1); +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk3, rf_clk3_ao, "clka3", 1); +DEFINE_CLK_RPMH_VRM(sm8550, rf_clk4, rf_clk4_ao, "clka4", 1); +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk1, ln_bb_clk1_ao, "clka6", 2); +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk2, ln_bb_clk2_ao, "clka7", 2); +DEFINE_CLK_RPMH_VRM(sm8550, ln_bb_clk3, ln_bb_clk3_ao, "clka8", 2); + +static struct clk_hw *sm8550_rpmh_clocks[] = { + [RPMH_CXO_PAD_CLK] = &sm8550_xo_pad.hw, + [RPMH_CXO_PAD_CLK_A] = &sm8550_xo_pad_ao.hw, + [RPMH_CXO_CLK] = &sm8550_bi_tcxo.hw, + [RPMH_CXO_CLK_A] = &sm8550_bi_tcxo_ao.hw, + [RPMH_LN_BB_CLK1] = &sm8550_ln_bb_clk1.hw, + [RPMH_LN_BB_CLK1_A] = &sm8550_ln_bb_clk1_ao.hw, + [RPMH_LN_BB_CLK2] = &sm8550_ln_bb_clk2.hw, + [RPMH_LN_BB_CLK2_A] = &sm8550_ln_bb_clk2_ao.hw, + [RPMH_LN_BB_CLK3] = &sm8550_ln_bb_clk3.hw, + [RPMH_LN_BB_CLK3_A] = &sm8550_ln_bb_clk3_ao.hw, + [RPMH_RF_CLK1] = &sm8550_rf_clk1.hw, + [RPMH_RF_CLK1_A] = &sm8550_rf_clk1_ao.hw, + [RPMH_RF_CLK2] = &sm8550_rf_clk2.hw, + [RPMH_RF_CLK2_A] = &sm8550_rf_clk2_ao.hw, + [RPMH_RF_CLK3] = &sm8550_rf_clk3.hw, + [RPMH_RF_CLK3_A] = &sm8550_rf_clk3_ao.hw, + [RPMH_RF_CLK4] = &sm8550_rf_clk4.hw, + [RPMH_RF_CLK4_A] = &sm8550_rf_clk4_ao.hw, + [RPMH_IPA_CLK] = &sdm845_ipa.hw, +}; + +static const struct clk_rpmh_desc clk_rpmh_sm8550 = { + .clks = sm8550_rpmh_clocks, + .num_clks = ARRAY_SIZE(sm8550_rpmh_clocks), +}; + static struct clk_hw *sc7280_rpmh_clocks[] = { [RPMH_CXO_CLK] = &sc7280_bi_tcxo.hw, [RPMH_CXO_CLK_A] = &sc7280_bi_tcxo_ao.hw, @@ -694,29 +761,31 @@ static int clk_rpmh_probe(struct platform_device *pdev) name = hw_clks[i]->init->name; - rpmh_clk = to_clk_rpmh(hw_clks[i]); - res_addr = cmd_db_read_addr(rpmh_clk->res_name); - if (!res_addr) { - dev_err(&pdev->dev, "missing RPMh resource address for %s\n", - rpmh_clk->res_name); - return -ENODEV; - } + if (hw_clks[i]->init->ops != &clk_fixed_factor_ops) { + rpmh_clk = to_clk_rpmh(hw_clks[i]); + res_addr = cmd_db_read_addr(rpmh_clk->res_name); + if (!res_addr) { + dev_err(&pdev->dev, "missing RPMh resource address for %s\n", + rpmh_clk->res_name); + return -ENODEV; + } - data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len); - if (IS_ERR(data)) { - ret = PTR_ERR(data); - dev_err(&pdev->dev, - "error reading RPMh aux data for %s (%d)\n", - rpmh_clk->res_name, ret); - return ret; - } + data = cmd_db_read_aux_data(rpmh_clk->res_name, &aux_data_len); + if (IS_ERR(data)) { + ret = PTR_ERR(data); + dev_err(&pdev->dev, + "error reading RPMh aux data for %s (%d)\n", + rpmh_clk->res_name, ret); + return ret; + } - /* Convert unit from Khz to Hz */ - if (aux_data_len == sizeof(*data)) - rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL; + /* Convert unit from Khz to Hz */ + if (aux_data_len == sizeof(*data)) + rpmh_clk->unit = le32_to_cpu(data->unit) * 1000ULL; - rpmh_clk->res_addr += res_addr; - rpmh_clk->dev = &pdev->dev; + rpmh_clk->res_addr += res_addr; + rpmh_clk->dev = &pdev->dev; + } ret = devm_clk_hw_register(&pdev->dev, hw_clks[i]); if (ret) { @@ -752,6 +821,7 @@ static const struct of_device_id clk_rpmh_match_table[] = { { .compatible = "qcom,sm8250-rpmh-clk", .data = &clk_rpmh_sm8250}, { .compatible = "qcom,sm8350-rpmh-clk", .data = &clk_rpmh_sm8350}, { .compatible = "qcom,sm8450-rpmh-clk", .data = &clk_rpmh_sm8450}, + { .compatible = "qcom,sm8550-rpmh-clk", .data = &clk_rpmh_sm8550}, { .compatible = "qcom,sc7280-rpmh-clk", .data = &clk_rpmh_sc7280}, { } };
Adds the RPMH clocks present in SM8550 SoC. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/clk/qcom/clk-rpmh.c | 110 +++++++++++++++++++++++++++++------- 1 file changed, 90 insertions(+), 20 deletions(-)