| Message ID | 20221116110515.2612515-3-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | regulator: qcom-rpmh: Add support for PM8550 | expand |
On 16/11/2022 12:05, Abel Vesa wrote: > Add the rpmh regulators found in PM8550 PMIC. It's a bit more than just PM8550.. The changes look good though, so with the commit message rectified: Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > They contain FT-SMPS 525s, so add their configuration as well. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/regulator/qcom-rpmh-regulator.c | 81 +++++++++++++++++++++++++ > 1 file changed, 81 insertions(+) > > diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c > index 4158ff126a67..42c42d17335b 100644 > --- a/drivers/regulator/qcom-rpmh-regulator.c > +++ b/drivers/regulator/qcom-rpmh-regulator.c > @@ -731,6 +731,24 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps520 = { > .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, > }; > > +static const struct rpmh_vreg_hw_data pmic5_ftsmps525_lv = { > + .regulator_type = VRM, > + .ops = &rpmh_regulator_vrm_ops, > + .voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 267, 4000), > + .n_voltages = 268, > + .pmic_mode_map = pmic_mode_map_pmic5_smps, > + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, > +}; > + > +static const struct rpmh_vreg_hw_data pmic5_ftsmps525_mv = { > + .regulator_type = VRM, > + .ops = &rpmh_regulator_vrm_ops, > + .voltage_range = REGULATOR_LINEAR_RANGE(600000, 0, 267, 8000), > + .n_voltages = 268, > + .pmic_mode_map = pmic_mode_map_pmic5_smps, > + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, > +}; > + > static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = { > .regulator_type = VRM, > .ops = &rpmh_regulator_vrm_ops, > @@ -987,6 +1005,57 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = { > {} > }; > > +static const struct rpmh_vreg_init_data pm8550_vreg_data[] = { > + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo, "vdd-l1-l4-l10"), > + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"), > + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), > + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l10"), > + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"), > + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l6-l7"), > + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l6-l7"), > + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l8-l9"), > + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"), > + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l1-l4-l10"), > + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l11"), > + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"), > + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"), > + RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"), > + RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo, "vdd-l15"), > + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16"), > + RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l17"), > + RPMH_VREG("bob1", "bob%s1", &pmic5_bob, "vdd-bob1"), > + RPMH_VREG("bob2", "bob%s2", &pmic5_bob, "vdd-bob2"), > + {} > +}; > + > +static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = { > + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"), > + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"), > + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"), > + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"), > + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"), > + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_mv, "vdd-s6"), > + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), > + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"), > + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), > + {} > +}; > + > +static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = { > + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"), > + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"), > + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"), > + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"), > + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"), > + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"), > + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"), > + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"), > + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), > + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"), > + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), > + {} > +}; > + > static const struct rpmh_vreg_init_data pm8009_vreg_data[] = { > RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), > RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"), > @@ -1314,6 +1383,18 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { > .compatible = "qcom,pm8450-rpmh-regulators", > .data = pm8450_vreg_data, > }, > + { > + .compatible = "qcom,pm8550-rpmh-regulators", > + .data = pm8550_vreg_data, > + }, > + { > + .compatible = "qcom,pm8550ve-rpmh-regulators", > + .data = pm8550ve_vreg_data, > + }, > + { > + .compatible = "qcom,pm8550vs-rpmh-regulators", > + .data = pm8550vs_vreg_data, > + }, > { > .compatible = "qcom,pm8998-rpmh-regulators", > .data = pm8998_vreg_data,
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 4158ff126a67..42c42d17335b 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -731,6 +731,24 @@ static const struct rpmh_vreg_hw_data pmic5_ftsmps520 = { .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, }; +static const struct rpmh_vreg_hw_data pmic5_ftsmps525_lv = { + .regulator_type = VRM, + .ops = &rpmh_regulator_vrm_ops, + .voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 267, 4000), + .n_voltages = 268, + .pmic_mode_map = pmic_mode_map_pmic5_smps, + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, +}; + +static const struct rpmh_vreg_hw_data pmic5_ftsmps525_mv = { + .regulator_type = VRM, + .ops = &rpmh_regulator_vrm_ops, + .voltage_range = REGULATOR_LINEAR_RANGE(600000, 0, 267, 8000), + .n_voltages = 268, + .pmic_mode_map = pmic_mode_map_pmic5_smps, + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, +}; + static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = { .regulator_type = VRM, .ops = &rpmh_regulator_vrm_ops, @@ -987,6 +1005,57 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = { {} }; +static const struct rpmh_vreg_init_data pm8550_vreg_data[] = { + RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo, "vdd-l1-l4-l10"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l10"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l6-l7"), + RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l6-l7"), + RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l8-l9"), + RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"), + RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l1-l4-l10"), + RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo, "vdd-l11"), + RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"), + RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"), + RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"), + RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo, "vdd-l15"), + RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16"), + RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l17"), + RPMH_VREG("bob1", "bob%s1", &pmic5_bob, "vdd-bob1"), + RPMH_VREG("bob2", "bob%s2", &pmic5_bob, "vdd-bob2"), + {} +}; + +static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_mv, "vdd-s6"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), + {} +}; + +static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps525_lv, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps525_lv, "vdd-s2"), + RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps525_lv, "vdd-s3"), + RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"), + RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"), + RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"), + RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"), + RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), + {} +}; + static const struct rpmh_vreg_init_data pm8009_vreg_data[] = { RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515, "vdd-s2"), @@ -1314,6 +1383,18 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .compatible = "qcom,pm8450-rpmh-regulators", .data = pm8450_vreg_data, }, + { + .compatible = "qcom,pm8550-rpmh-regulators", + .data = pm8550_vreg_data, + }, + { + .compatible = "qcom,pm8550ve-rpmh-regulators", + .data = pm8550ve_vreg_data, + }, + { + .compatible = "qcom,pm8550vs-rpmh-regulators", + .data = pm8550vs_vreg_data, + }, { .compatible = "qcom,pm8998-rpmh-regulators", .data = pm8998_vreg_data,
Add the rpmh regulators found in PM8550 PMIC. They contain FT-SMPS 525s, so add their configuration as well. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/regulator/qcom-rpmh-regulator.c | 81 +++++++++++++++++++++++++ 1 file changed, 81 insertions(+)