| Message ID | 20221116123505.2760397-2-abel.vesa@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [1/2] dt-bindings: PCI: qcom: Add SM8550 to binding | expand |
On 16/11/2022 13:35, Abel Vesa wrote: > Add compatibles for both PCIe G4 and G3 found on SM8550. > Also add the cnoc_pcie_sf_axi clock needed by the SM8550. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > drivers/pci/controller/dwc/pcie-qcom.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 6ac28ea8d67d..4a62b2500c1d 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -181,7 +181,7 @@ struct qcom_pcie_resources_2_3_3 { > > /* 6 clocks typically, 7 for sm8250 */ > struct qcom_pcie_resources_2_7_0 { > - struct clk_bulk_data clks[12]; > + struct clk_bulk_data clks[13]; > int num_clks; > struct regulator_bulk_data supplies[2]; > struct reset_control *pci_reset; > @@ -1206,6 +1206,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > res->clks[idx++].id = "noc_aggr_4"; > res->clks[idx++].id = "noc_aggr_south_sf"; > res->clks[idx++].id = "cnoc_qx"; > + res->clks[idx++].id = "cnoc_pcie_sf_axi"; > > num_opt_clks = idx - num_clks; > res->num_clks = idx; > @@ -1752,6 +1753,8 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 }, > { .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 }, > { .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 }, > + { .compatible = "qcom,pcie-sm8550-pcie0", .data = &cfg_1_9_0 }, > + { .compatible = "qcom,pcie-sm8550-pcie1", .data = &cfg_1_9_0 }, > { } > }; >
Hi Abel, Instead of making up your own subject line prefix, please take a look at the history and make yours match: PCI: qcom: Rename host-init error label PCI: qcom: Drop unused post_deinit callback PCI: qcom: Sort device-id table PCI: qcom: Clean up IP configurations ... On Wed, Nov 16, 2022 at 02:35:05PM +0200, Abel Vesa wrote: > Add compatibles for both PCIe G4 and G3 found on SM8550. > Also add the cnoc_pcie_sf_axi clock needed by the SM8550. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > drivers/pci/controller/dwc/pcie-qcom.c | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index 6ac28ea8d67d..4a62b2500c1d 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -181,7 +181,7 @@ struct qcom_pcie_resources_2_3_3 { > > /* 6 clocks typically, 7 for sm8250 */ > struct qcom_pcie_resources_2_7_0 { > - struct clk_bulk_data clks[12]; > + struct clk_bulk_data clks[13]; > int num_clks; > struct regulator_bulk_data supplies[2]; > struct reset_control *pci_reset; > @@ -1206,6 +1206,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > res->clks[idx++].id = "noc_aggr_4"; > res->clks[idx++].id = "noc_aggr_south_sf"; > res->clks[idx++].id = "cnoc_qx"; > + res->clks[idx++].id = "cnoc_pcie_sf_axi"; > > num_opt_clks = idx - num_clks; > res->num_clks = idx; > @@ -1752,6 +1753,8 @@ static const struct of_device_id qcom_pcie_match[] = { > { .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 }, > { .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 }, > { .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 }, > + { .compatible = "qcom,pcie-sm8550-pcie0", .data = &cfg_1_9_0 }, > + { .compatible = "qcom,pcie-sm8550-pcie1", .data = &cfg_1_9_0 }, > { } > }; > > -- > 2.34.1 >
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 6ac28ea8d67d..4a62b2500c1d 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -181,7 +181,7 @@ struct qcom_pcie_resources_2_3_3 { /* 6 clocks typically, 7 for sm8250 */ struct qcom_pcie_resources_2_7_0 { - struct clk_bulk_data clks[12]; + struct clk_bulk_data clks[13]; int num_clks; struct regulator_bulk_data supplies[2]; struct reset_control *pci_reset; @@ -1206,6 +1206,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) res->clks[idx++].id = "noc_aggr_4"; res->clks[idx++].id = "noc_aggr_south_sf"; res->clks[idx++].id = "cnoc_qx"; + res->clks[idx++].id = "cnoc_pcie_sf_axi"; num_opt_clks = idx - num_clks; res->num_clks = idx; @@ -1752,6 +1753,8 @@ static const struct of_device_id qcom_pcie_match[] = { { .compatible = "qcom,pcie-sm8250", .data = &cfg_1_9_0 }, { .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 }, { .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 }, + { .compatible = "qcom,pcie-sm8550-pcie0", .data = &cfg_1_9_0 }, + { .compatible = "qcom,pcie-sm8550-pcie1", .data = &cfg_1_9_0 }, { } };
Add compatibles for both PCIe G4 and G3 found on SM8550. Also add the cnoc_pcie_sf_axi clock needed by the SM8550. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)