From patchwork Wed Nov 16 14:56:05 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 13045341 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1B96DC41535 for ; Wed, 16 Nov 2022 14:57:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234052AbiKPO5I (ORCPT ); Wed, 16 Nov 2022 09:57:08 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:48474 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233788AbiKPO4z (ORCPT ); Wed, 16 Nov 2022 09:56:55 -0500 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BC88910055; Wed, 16 Nov 2022 06:56:52 -0800 (PST) Received: from g550jk.arnhem.chello.nl (unknown [62.108.10.64]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id 4ABD9D05CD; Wed, 16 Nov 2022 14:56:51 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1668610611; bh=iBM2d0vBat5ZFgDCbZjjmK/mChO+wHHFauDbHUV6pcI=; h=From:To:Cc:Subject:Date:In-Reply-To:References; b=Gc9gAvRCZzJvbE7fqvgviknS6NXUCYJeFY125AEuembqNwvMw2+w7EEecGAmq0fNm Q/z0//+OJ/mM5Gy2HoEzH6nbKiPuL4i06BsmxKkEe/a/wUUw63Qu/92vX/WFbkAHGW gUkelp+fn5UguZI8XOTzuG0ah9sNMTM3y9hYIETo= From: Luca Weiss To: linux-arm-msm@vger.kernel.org Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Alejandro Tafalla , Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 4/8] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A2 Lite Date: Wed, 16 Nov 2022 15:56:05 +0100 Message-Id: <20221116145616.17884-5-luca@z3ntu.xyz> X-Mailer: git-send-email 2.38.1 In-Reply-To: <20221116145616.17884-1-luca@z3ntu.xyz> References: <20221116145616.17884-1-luca@z3ntu.xyz> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Alejandro Tafalla Add device tree for the Xiaomi Mi A2 Lite (daisy) smartphone. This device is based on Snapdragon 625 (msm8953) SoC. Signed-off-by: Alejandro Tafalla --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/msm8953-xiaomi-daisy.dts | 316 ++++++++++++++++++ 2 files changed, 317 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 21a6a7b5a2cf..6a80a36465f7 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-j5.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts new file mode 100644 index 000000000000..8ddf075ccda4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022 The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/ { + model = "Xiaomi Mi A2 Lite"; + compatible = "xiaomi,daisy", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id= <0x1000b 0x9>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 2280 * 3)>; + + width = <1080>; + height = <2280>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + reserved-memory { + /delete-node/ memory@85b00000; + + memory@84b00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + adsp_fw_mem: memory@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + /delete-node/ memory@8e700000; + wcnss_fw_mem: memory@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + }; + + sensors: i2c-sensors { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + lsm6dsl@6a { + compatible = "st,lsm6dsl"; + reg = <0x6a>; + vdd-supply = <&pm8953_l10>; + vddio-supply = <&pm8953_l6>; + + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + speaker_codec: audio-codec@3a { + compatible = "maxim,max98927"; + reg = <0x3a>; + + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + vmon-slot-no = <1>; + imon-slot-no = <1>; + interleave_mode = <0>; + + #sound-dai-cells = <0>; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2280>; + }; +}; + +&pm8953_resin { + linux,code = ; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <20000>; + qcom,ovp-milivolt = <29500>; + qcom,num-strings = <2>; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-always-on; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +};