| Message ID | 20221116145616.17884-6-luca@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add a bunch of msm8953 dts files | expand |
On 16/11/2022 15:56, Luca Weiss wrote: > From: Adam Skladowski <a39.skl@gmail.com> > > Add device tree for the Xiaomi Redmi Note 4X (mido) smartphone. This > device is based on Snapdragon 625 (msm8953) SoC. > > Signed-off-by: Adam Skladowski <a39.skl@gmail.com> > --- Same comments: delete nodes by label reference, possibly licensing Konrad > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/msm8953-xiaomi-mido.dts | 331 ++++++++++++++++++ > 2 files changed, 332 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index 6a80a36465f7..229fa48c8006 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb > +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb > dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb > diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts > new file mode 100644 > index 000000000000..dc0228c06e3b > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts > @@ -0,0 +1,331 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2022, The Linux Foundation. All rights reserved. > + */ > +/dts-v1/; > + > +#include "msm8953.dtsi" > +#include "pm8953.dtsi" > +#include "pmi8950.dtsi" > +#include <dt-bindings/leds/common.h> > + > +/ { > + model = "Xiaomi Redmi Note 4X"; > + compatible = "xiaomi,mido", "qcom,msm8953"; > + chassis-type = "handset"; > + qcom,msm-id = <293 0>; > + qcom,board-id = <11 0>; > + > + aliases { > + mmc0 = &sdhc_1; > + mmc1 = &sdhc_2; > + }; > + > + speaker_amp: audio-amplifier { > + compatible = "awinic,aw8738"; > + mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; > + awinic,mode = <5>; > + sound-name-prefix = "Speaker Amp"; > + }; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer@90001000 { > + compatible = "simple-framebuffer"; > + reg = <0 0x90001000 0 (1920 * 1080 * 3)>; > + > + width = <1080>; > + height = <1920>; > + stride = <(1080 * 3)>; > + format = "r8g8b8"; > + > + power-domains = <&gcc MDSS_GDSC>; > + > + clocks = <&gcc GCC_MDSS_AHB_CLK>, > + <&gcc GCC_MDSS_AXI_CLK>, > + <&gcc GCC_MDSS_VSYNC_CLK>, > + <&gcc GCC_MDSS_MDP_CLK>, > + <&gcc GCC_MDSS_BYTE0_CLK>, > + <&gcc GCC_MDSS_PCLK0_CLK>, > + <&gcc GCC_MDSS_ESC0_CLK>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_key_default>; > + > + key-volume-up { > + label = "Volume Up"; > + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_VOLUMEUP>; > + }; > + }; > + > + reserved-memory { > + /delete-node/ memory@85b00000; > + > + memory@84a00000 { > + reg = <0x0 0x84a00000 0x0 0x1900000>; > + no-map; > + }; > + > + memory@90001000 { > + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; > + no-map; > + }; > + > + ramoops@9ff00000 { > + compatible = "ramoops"; > + reg = <0x0 0x9ff00000 0x0 0x00100000>; > + console-size = <0x100000>; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + regulator-always-on; > + regulator-boot-on; > + }; > +}; > + > +&hsusb_phy { > + vdd-supply = <&pm8953_l3>; > + vdda-pll-supply = <&pm8953_l7>; > + vdda-phy-dpdm-supply = <&pm8953_l13>; > + > + status = "okay"; > +}; > + > +&i2c_2 { > + status = "okay"; > + > + led-controller@45 { > + compatible = "awinic,aw2013"; > + reg = <0x45>; > + > + vcc-supply = <&pm8953_l10>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + led@0 { > + reg = <0>; > + color = <LED_COLOR_ID_RED>; > + function = LED_FUNCTION_INDICATOR; > + led-max-microamp = <5000>; > + }; > + > + led@1 { > + reg = <1>; > + color = <LED_COLOR_ID_GREEN>; > + function = LED_FUNCTION_INDICATOR; > + led-max-microamp = <5000>; > + }; > + > + led@2 { > + reg = <2>; > + color = <LED_COLOR_ID_BLUE>; > + function = LED_FUNCTION_INDICATOR; > + led-max-microamp = <5000>; > + }; > + }; > +}; > + > +&i2c_3 { > + status = "okay"; > + > + touchscreen@38 { > + compatible = "edt,edt-ft5406"; > + reg = <0x38>; > + > + interrupt-parent = <&tlmm>; > + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts_int_active>; > + > + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&pm8953_l10>; > + > + touchscreen-size-x = <1080>; > + touchscreen-size-y = <1920>; > + }; > +}; > + > +&pm8953_resin { > + linux,code = <KEY_VOLUMEDOWN>; > + status = "okay"; > +}; > + > +&rpm_requests { > + regulators { > + compatible = "qcom,rpm-pm8953-regulators"; > + > + vdd_s1-supply = <&vph_pwr>; > + vdd_s2-supply = <&vph_pwr>; > + vdd_s3-supply = <&vph_pwr>; > + vdd_s4-supply = <&vph_pwr>; > + vdd_s5-supply = <&vph_pwr>; > + vdd_s6-supply = <&vph_pwr>; > + vdd_s7-supply = <&vph_pwr>; > + vdd_l1-supply = <&pm8953_s3>; > + vdd_l2_l3-supply = <&pm8953_s3>; > + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; > + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; > + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; > + vdd_l23-supply = <&pm8953_s3>; > + > + pm8953_s1: s1 { > + regulator-min-microvolt = <863000>; > + regulator-max-microvolt = <1152000>; > + }; > + > + pm8953_s3: s3 { > + regulator-min-microvolt = <1224000>; > + regulator-max-microvolt = <1224000>; > + }; > + > + pm8953_s4: s4 { > + regulator-min-microvolt = <1896000>; > + regulator-max-microvolt = <2048000>; > + }; > + > + pm8953_l1: l1 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1100000>; > + }; > + > + pm8953_l2: l2 { > + regulator-min-microvolt = <975000>; > + regulator-max-microvolt = <1225000>; > + }; > + > + pm8953_l3: l3 { > + regulator-min-microvolt = <925000>; > + regulator-max-microvolt = <925000>; > + regulator-allow-set-load; > + }; > + > + pm8953_l5: l5 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8953_l6: l6 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8953_l7: l7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1900000>; > + }; > + > + pm8953_l8: l8 { > + regulator-min-microvolt = <2900000>; > + regulator-max-microvolt = <2900000>; > + }; > + > + pm8953_l9: l9 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + pm8953_l10: l10 { > + regulator-always-on; > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + }; > + > + pm8953_l11: l11 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8953_l12: l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + }; > + > + pm8953_l13: l13 { > + regulator-min-microvolt = <3125000>; > + regulator-max-microvolt = <3125000>; > + }; > + > + pm8953_l16: l16 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + pm8953_l17: l17 { > + regulator-min-microvolt = <2850000>; > + regulator-max-microvolt = <2850000>; > + }; > + > + pm8953_l19: l19 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1350000>; > + }; > + > + pm8953_l22: l22 { > + regulator-always-on; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2850000>; > + }; > + > + pm8953_l23: l23 { > + regulator-min-microvolt = <975000>; > + regulator-max-microvolt = <1225000>; > + }; > + }; > +}; > + > +&sdhc_1 { > + vmmc-supply = <&pm8953_l8>; > + vqmmc-supply = <&pm8953_l5>; > + > + status = "okay"; > +}; > + > +&sdhc_2 { > + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; > + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; > + > + vmmc-supply = <&pm8953_l11>; > + vqmmc-supply = <&pm8953_l12>; > + > + status = "okay"; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <0 4>, <135 4>; > + > + ts_int_active: ts-int-active-state { > + pins = "gpio65"; > + function = "gpio"; > + drive-strength = <8>; > + bias-pull-up; > + }; > +}; > + > +&usb3 { > + status = "okay"; > +}; > + > +&usb3_dwc3 { > + dr_mode = "peripheral"; > +};
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6a80a36465f7..229fa48c8006 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts new file mode 100644 index 000000000000..dc0228c06e3b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Xiaomi Redmi Note 4X"; + compatible = "xiaomi,mido", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id = <11 0>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + mode-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer@90001000 { + compatible = "simple-framebuffer"; + reg = <0 0x90001000 0 (1920 * 1080 * 3)>; + + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + /delete-node/ memory@85b00000; + + memory@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + memory@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x00100000>; + console-size = <0x100000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_INDICATOR; + led-max-microamp = <5000>; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <65 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_active>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8953_l10>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + }; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + vdd_l23-supply = <&pm8953_s3>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-always-on; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <135 4>; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +};