diff mbox series

[02/15] tty: serial: qcom-geni-serial: remove unused symbols

Message ID 20221118122539.384993-3-brgl@bgdev.pl (mailing list archive)
State Superseded
Headers show
Series serial: qcom-geni-serial: implement support for SE DMA | expand

Commit Message

Bartosz Golaszewski Nov. 18, 2022, 12:25 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Drop all unused symbols from the driver.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/tty/serial/qcom_geni_serial.c | 15 ---------------
 1 file changed, 15 deletions(-)

Comments

Konrad Dybcio Nov. 18, 2022, 1:19 p.m. UTC | #1
On 18/11/2022 13:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> Drop all unused symbols from the driver.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   drivers/tty/serial/qcom_geni_serial.c | 15 ---------------
>   1 file changed, 15 deletions(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 9f2212e7b5ec..7af5df6833c7 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -42,20 +42,11 @@
>   #define UART_TX_PAR_EN		BIT(0)
>   #define UART_CTS_MASK		BIT(1)
>   
> -/* SE_UART_TX_WORD_LEN */
> -#define TX_WORD_LEN_MSK		GENMASK(9, 0)
> -
>   /* SE_UART_TX_STOP_BIT_LEN */
> -#define TX_STOP_BIT_LEN_MSK	GENMASK(23, 0)
>   #define TX_STOP_BIT_LEN_1	0
> -#define TX_STOP_BIT_LEN_1_5	1
>   #define TX_STOP_BIT_LEN_2	2
>   
> -/* SE_UART_TX_TRANS_LEN */
> -#define TX_TRANS_LEN_MSK	GENMASK(23, 0)
> -
>   /* SE_UART_RX_TRANS_CFG */
> -#define UART_RX_INS_STATUS_BIT	BIT(2)
>   #define UART_RX_PAR_EN		BIT(3)
>   
>   /* SE_UART_RX_WORD_LEN */
> @@ -66,12 +57,9 @@
>   
>   /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */
>   #define PAR_CALC_EN		BIT(0)
> -#define PAR_MODE_MSK		GENMASK(2, 1)
> -#define PAR_MODE_SHFT		1
>   #define PAR_EVEN		0x00
>   #define PAR_ODD			0x01
>   #define PAR_SPACE		0x10
> -#define PAR_MARK		0x11
>   
>   /* SE_UART_MANUAL_RFR register fields */
>   #define UART_MANUAL_RFR_EN	BIT(31)
> @@ -80,11 +68,8 @@
>   
>   /* UART M_CMD OP codes */
>   #define UART_START_TX		0x1
> -#define UART_START_BREAK	0x4
> -#define UART_STOP_BREAK		0x5
>   /* UART S_CMD OP codes */
>   #define UART_START_READ		0x1
> -#define UART_PARAM		0x1
>   
>   #define UART_OVERSAMPLING	32
>   #define STALE_TIMEOUT		16
diff mbox series

Patch

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 9f2212e7b5ec..7af5df6833c7 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -42,20 +42,11 @@ 
 #define UART_TX_PAR_EN		BIT(0)
 #define UART_CTS_MASK		BIT(1)
 
-/* SE_UART_TX_WORD_LEN */
-#define TX_WORD_LEN_MSK		GENMASK(9, 0)
-
 /* SE_UART_TX_STOP_BIT_LEN */
-#define TX_STOP_BIT_LEN_MSK	GENMASK(23, 0)
 #define TX_STOP_BIT_LEN_1	0
-#define TX_STOP_BIT_LEN_1_5	1
 #define TX_STOP_BIT_LEN_2	2
 
-/* SE_UART_TX_TRANS_LEN */
-#define TX_TRANS_LEN_MSK	GENMASK(23, 0)
-
 /* SE_UART_RX_TRANS_CFG */
-#define UART_RX_INS_STATUS_BIT	BIT(2)
 #define UART_RX_PAR_EN		BIT(3)
 
 /* SE_UART_RX_WORD_LEN */
@@ -66,12 +57,9 @@ 
 
 /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */
 #define PAR_CALC_EN		BIT(0)
-#define PAR_MODE_MSK		GENMASK(2, 1)
-#define PAR_MODE_SHFT		1
 #define PAR_EVEN		0x00
 #define PAR_ODD			0x01
 #define PAR_SPACE		0x10
-#define PAR_MARK		0x11
 
 /* SE_UART_MANUAL_RFR register fields */
 #define UART_MANUAL_RFR_EN	BIT(31)
@@ -80,11 +68,8 @@ 
 
 /* UART M_CMD OP codes */
 #define UART_START_TX		0x1
-#define UART_START_BREAK	0x4
-#define UART_STOP_BREAK		0x5
 /* UART S_CMD OP codes */
 #define UART_START_READ		0x1
-#define UART_PARAM		0x1
 
 #define UART_OVERSAMPLING	32
 #define STALE_TIMEOUT		16