From patchwork Wed Nov 23 21:07:17 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 13054338 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4B822C43219 for ; Wed, 23 Nov 2022 21:08:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236305AbiKWVH7 (ORCPT ); Wed, 23 Nov 2022 16:07:59 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58640 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239054AbiKWVH0 (ORCPT ); Wed, 23 Nov 2022 16:07:26 -0500 Received: from mail-lf1-x12c.google.com (mail-lf1-x12c.google.com [IPv6:2a00:1450:4864:20::12c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ADBC29C7B0 for ; Wed, 23 Nov 2022 13:07:24 -0800 (PST) Received: by mail-lf1-x12c.google.com with SMTP id bp15so29907176lfb.13 for ; Wed, 23 Nov 2022 13:07:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=JkQXdEnEp/aHqX+4sRriK/xTChmdPfOQR0e9Uaw2pUM=; b=yiWwbJ1N3sp5daE6/qliRvNuEInHadZsjHoewG+DNhr7IU0K1FLambztBsjLSAspHX BeLKFrWSBRVxydjYIvGF/SPOghwhkJK/hfqZ6JfIRI+drrmrOhixEy5kN4mBidUPuUL9 QUrZ4c7xnqv0p6ljlDs0WUhYYonP37WjcbDnyMLrcYtAqAG3ZjtnolwYQWA+HYEoADhK qJQFJcSKFfU+ICJzo+TLTTi+MOBBF4z+PJyjW5VOtBaamH6m+j2CM7Z/YtzfFh+7rl25 ueMwJ7AB9uFfqVVuh8/agiJTDANm26YajnG63d28TJ80kGjQXM4Ba1A5e7Ed5pgg0nz7 Bo8Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=JkQXdEnEp/aHqX+4sRriK/xTChmdPfOQR0e9Uaw2pUM=; b=3NRCcbqKGgBPGLyNT+FF7F47fz5feLpOrUAzZazUal/qMQ6lrTjWZGFHXXI7gkBLyd hcE91HZdEuFuaQuZAlj9q9axLwR5pbAGpZ2B+OAq5LzuMGW1uqzeWbLIz0UCkndp4sJG uC3t22E9RzUj/cTh9KXK03o9ey/D54DJVmW8Oe4esoYihu3ipMiZLHThcgyOmiPXmUV2 gsN/2wMpbHqETyi70d3BVIHOhTzm/Vxdx5DA9rvancXQhTrZy8xi8vTs6dHK4ptK+xvc Iis85aEG3moFTg+ADQZU9s/HkurNU4s17P5XQiZFJ1eTKQLJKc5mgsRTxLDHaCaAOnP/ f/SQ== X-Gm-Message-State: ANoB5pnZ9qLmcAA69fCkuqinztSgDU30GXXtRJPLXOmxce24m754dmpx ik73Uw2ED26z5BZ9OKTxH0HYKA== X-Google-Smtp-Source: AA0mqf4gJOQRGkLB0Yzj6epdP1e5cDXavJVdmv4fOWMG2gUBr/lGuQTBD/Jrv2tv5FOMH2pco70ZQg== X-Received: by 2002:a05:6512:281d:b0:4ab:a159:3478 with SMTP id cf29-20020a056512281d00b004aba1593478mr3547218lfb.655.1669237643063; Wed, 23 Nov 2022 13:07:23 -0800 (PST) Received: from eriador.unikie.fi ([192.130.178.91]) by smtp.gmail.com with ESMTPSA id c26-20020ac2415a000000b0048a8c907fe9sm3024119lfi.167.2022.11.23.13.07.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 23 Nov 2022 13:07:22 -0800 (PST) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Clark , Sean Paul , Abhinav Kumar , Rob Herring , Krzysztof Kozlowski Cc: Stephen Boyd , David Airlie , Daniel Vetter , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org Subject: [PATCH v3 2/5] arm64: dts: qcom: sm8450: add display hardware devices Date: Wed, 23 Nov 2022 23:07:17 +0200 Message-Id: <20221123210720.3593671-3-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20221123210720.3593671-1-dmitry.baryshkov@linaro.org> References: <20221123210720.3593671-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add devices tree nodes describing display hardware on SM8450: - Display Clock Controller - MDSS - MDP - two DSI controllers and DSI PHYs This does not provide support for DP controllers present on SM8450. Reviewed-by: Konrad Dybcio Signed-off-by: Dmitry Baryshkov --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 283 ++++++++++++++++++++++++++- 1 file changed, 279 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 8cc9f62f7645..31fcf3908b2a 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2394,6 +2394,281 @@ camcc: clock-controller@ade0000 { status = "disabled"; }; + mdss: mdss@ae00000 { + compatible = "qcom,sm8450-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + /* same path used twice */ + interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>, + <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x2800 0x402>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8450-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-172000000 { + opp-hz = /bits/ 64 <172000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-5nm-8450"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + power-domains = <&rpmhpd SM8450_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-5nm-8450"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96900 0 0x260>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sm8450-dispcc"; reg = <0 0x0af00000 0 0x20000>; @@ -2401,10 +2676,10 @@ dispcc: clock-controller@af00000 { <&rpmhcc RPMH_CXO_CLK_A>, <&gcc GCC_DISP_AHB_CLK>, <&sleep_clk>, - <0>, /* dsi0 */ - <0>, - <0>, /* dsi1 */ - <0>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, <0>, /* dp0 */ <0>, <0>, /* dp1 */