| Message ID | 20221127170858.440040-3-davidwronek@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | arm64: dts: qcom: sm8250-lenovo-j716f: Add initial device tree | expand |
On 27/11/2022 18:08, David Wronek wrote: > Add the initial device tree for Lenovo Xiaoxin Pad Pro 2021 based on > Qualcomm SM8250 with the following features: > > - SimpleFB > - GPIO keys > - Regulators > - I2C > - UFS > - USB > > Signed-off-by: David Wronek <davidwronek@gmail.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sm8250-lenovo-j716f.dts | 561 ++++++++++++++++++ > 2 files changed, 562 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm8250-lenovo-j716f.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index afe496a93f94..c002f78144b6 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -158,6 +158,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb > dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sm8250-lenovo-j716f.dtb Thank you for your patch. There is something to discuss/improve. > +/ { > + model = "Lenovo Xiaoxin Pad Pro 2021"; > + compatible = "lenovo,j716f", "qcom,sm8250"; > + classis-type = "tablet"; > + > + qcom,msm-id = <0x164 0x20001>; > + qcom,board-id = <0x2010008 0>; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + bootargs = "fw_devlink=permissive clk_ignore_unused pd_ignore_unused"; These do not belong to mainlined DTS. > + stdout-path = "framebuffer0"; > + > + framebuffer0: framebuffer@9c000000 { > + compatible = "simple-framebuffer"; > + reg = <0 0x9c000000 0 0x2300000>; > + width = <2560>; > + height = <1600>; > + stride = <(2560 * 4)>; > + format = "a8r8g8b8"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + key-vol-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + }; > + }; > + > + reserved-memory { > + cont_splash_mem: memory@9c000000 { > + reg = <0x0 0x9c000000 0x0 0x2300000>; > + no-map; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + }; > + > + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ > + vreg_s6c_0p88: smpc6-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s6c_0p88"; > + > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-always-on; > + vin-supply = <&vph_pwr>; > + }; > +}; > + > +&apps_rsc { > + pm8150-rpmh-regulators { Node name: regulators-0 (this should already complain with dtbs_check) > + compatible = "qcom,pm8150-rpmh-regulators"; > + qcom,pmic-id = "a"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-s9-supply = <&vph_pwr>; > + vdd-s10-supply = <&vph_pwr>; > + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; > + vdd-l2-l10-supply = <&vreg_bob>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; > + vdd-l6-l9-supply = <&vreg_s8c_1p35>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; > + vdd-l13-l16-l17-supply = <&vreg_bob>; > + > + /* (S1+S2+S3) - cx.lvl (ARC) */ > + > + vreg_s4a_1p8: smps4 { > + regulator-name = "vreg_s4a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5a_1p9: smps5 { > + regulator-name = "vreg_s5a_1p9"; > + regulator-min-microvolt = <1900000>; > + regulator-max-microvolt = <2040000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s6a_0p95: smps6 { > + regulator-name = "vreg_s6a_0p95"; > + regulator-min-microvolt = <950000>; > + regulator-max-microvolt = <1128000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2a_3p1: ldo2 { > + regulator-name = "vreg_l2a_3p1"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3a_0p93: ldo3 { > + regulator-name = "vreg_l3a_0p93"; > + regulator-min-microvolt = <928000>; > + regulator-max-microvolt = <932000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L4 - lmx.lvl (ARC) */ > + > + vreg_l5a_0p88: ldo5 { > + regulator-name = "vreg_l5a_0p88"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6a_1p2: ldo6 { > + regulator-name = "vreg_l6a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7a_1p7: ldo7 { > + regulator-name = "vreg_l7a_1p7"; > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9a_1p2: ldo9 { > + regulator-name = "vreg_l9a_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10a_1p8: ldo10 { > + regulator-name = "vreg_l10a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + /* L11 - lcx.lvl (ARC) */ > + > + vreg_l12a_1p8: ldo12 { > + regulator-name = "vreg_l12a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13a_3p0: ldo13 { > + regulator-name = "vreg_l13a_3p0"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l14a_1p8: ldo14 { > + regulator-name = "vreg_l14a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l15a_1p8: ldo15 { > + regulator-name = "vreg_l15a_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16a_3p0: ldo16 { > + regulator-name = "vreg_l16a_3p0"; > + regulator-min-microvolt = <3024000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l17a_2p5: ldo17 { > + regulator-name = "vreg_l17a_2p5"; > + regulator-min-microvolt = <2496000>; > + regulator-max-microvolt = <3008000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l18a_0p8: ldo18 { > + regulator-name = "vreg_l18a_0p8"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <920000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + /* > + * Remaining regulators that are not yet supported: > + * OLEDB: 4925000-8100000 > + * ab: 4600000-6100000 > + * ibb: 800000-5400000 > + */ > + > + pm8150l-rpmh-regulators { Node name: regulators-1 > + compatible = "qcom,pm8150l-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vph_pwr>; > + vdd-s3-supply = <&vph_pwr>; > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-s6-supply = <&vph_pwr>; > + vdd-s7-supply = <&vph_pwr>; > + vdd-s8-supply = <&vph_pwr>; > + vdd-l1-l8-supply = <&vreg_s4a_1p8>; > + vdd-l2-l3-supply = <&vreg_s8c_1p35>; > + vdd-l4-l5-l6-supply = <&vreg_bob>; > + vdd-l7-l11-supply = <&vreg_bob>; > + vdd-l9-l10-supply = <&vreg_bob>; > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_bob: bob { > + regulator-name = "vreg_bob"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + }; > + > + /* > + * S1-S6 are ARCs: > + * (S1+S2) - gfx.lvl, > + * S3 - mx.lvl, > + * (S4+S5) - mmcx.lvl, > + * S6 - ebi.lvl > + */ > + > + vreg_s7c_0p35: smps7 { > + regulator-name = "vreg_s7c_0p35"; > + regulator-min-microvolt = <348000>; > + regulator-max-microvolt = <1000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s8c_1p35: smps8 { > + regulator-name = "vreg_s8c_1p4"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1400000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1c_1p8: ldo1 { > + regulator-name = "vreg_l1c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2c_1p2: ldo2 { > + regulator-name = "vreg_l2c_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_0p8: ldo3 { > + regulator-name = "vreg_l3c_0p8"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4c_1p8: ldo4 { > + regulator-name = "vreg_l4c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5c_1p8: ldo5 { > + regulator-name = "vreg_l5c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c_2p9: ldo6 { > + regulator-name = "vreg_l6c_2p9"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; > + > + vreg_l7c_2p9: ldo7 { > + regulator-name = "vreg_l7c_2p9"; > + regulator-min-microvolt = <2856000>; > + regulator-max-microvolt = <3104000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c_1p8: ldo8 { > + regulator-name = "vreg_l8c_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c_2p7: ldo9 { > + regulator-name = "vreg_l9c_2p7"; > + regulator-min-microvolt = <2704000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + }; > + > + vreg_l10c_3p0: ldo10 { > + regulator-name = "vreg_l10c_3p0"; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_3p1: ldo11 { > + regulator-name = "vreg_l11c_3p1"; > + regulator-min-microvolt = <3104000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pm8009-rpmh-regulators { Node name: regulators-2 > + compatible = "qcom,pm8009-rpmh-regulators"; > + qcom,pmic-id = "f"; > + > + vdd-s1-supply = <&vph_pwr>; > + vdd-s2-supply = <&vreg_bob>; > + vdd-l2-supply = <&vreg_s8c_1p35>; > + vdd-l5-l6-supply = <&vreg_bob>; > + vdd-l7-supply = <&vreg_s4a_1p8>; > + > + vreg_s1f_1p2: smps1 { > + regulator-name = "vreg_s1f_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s2f_0p5: smps2 { > + regulator-name = "vreg_s2f_0p5"; > + regulator-min-microvolt = <512000>; > + regulator-max-microvolt = <1100000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1f_1p1: ldo1 { > + regulator-name = "vreg_l1f_1p1"; > + regulator-min-microvolt = <1104000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l2f_1p2: ldo2 { > + regulator-name = "vreg_l2f_1p2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3f_1p1: ldo3 { > + regulator-name = "vreg_l3f_1p1"; > + regulator-min-microvolt = <1056000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4f_1p1: ldo4 { > + regulator-name = "vreg_l4f_1p1"; > + regulator-min-microvolt = <1096000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5f_2p8: ldo5 { > + regulator-name = "vreg_l5f_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6f_2p8: ldo6 { > + regulator-name = "vreg_l6f_2p8"; > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <3000000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7f_1p8: ldo7 { > + regulator-name = "vreg_l7f_1p8"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&gpi_dma0 { > + status = "okay"; > +}; > + > +&gpi_dma1 { > + status = "okay"; > +}; > + > +&gpi_dma2 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > + clock-frequency = <1000000>; > + > + /* hid-over-i2c ptp @ 60 */ > +}; > + > +&i2c3 { > + status = "okay"; > + clock-frequency = <400000>; > + > + bq27541@55 { Node names should be generic. https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "ti,bq27541"; > + reg = <0x55>; > + }; > +}; Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index afe496a93f94..c002f78144b6 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -158,6 +158,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-lenovo-j716f.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8250-lenovo-j716f.dts b/arch/arm64/boot/dts/qcom/sm8250-lenovo-j716f.dts new file mode 100644 index 000000000000..c493721ef664 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-lenovo-j716f.dts @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, David Wronek <davidwronek@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/ { + model = "Lenovo Xiaoxin Pad Pro 2021"; + compatible = "lenovo,j716f", "qcom,sm8250"; + classis-type = "tablet"; + + qcom,msm-id = <0x164 0x20001>; + qcom,board-id = <0x2010008 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bootargs = "fw_devlink=permissive clk_ignore_unused pd_ignore_unused"; + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0 0x9c000000 0 0x2300000>; + width = <2560>; + height = <1600>; + stride = <(2560 * 4)>; + format = "a8r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p93: ldo3 { + regulator-name = "vreg_l3a_0p93"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p7: ldo7 { + regulator-name = "vreg_l7a_1p7"; + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_3p0: ldo13 { + regulator-name = "vreg_l13a_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_3p0: ldo16 { + regulator-name = "vreg_l16a_3p0"; + regulator-min-microvolt = <3024000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_2p5: ldo17 { + regulator-name = "vreg_l17a_2p5"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p8: ldo18 { + regulator-name = "vreg_l18a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* + * Remaining regulators that are not yet supported: + * OLEDB: 4925000-8100000 + * ab: 4600000-6100000 + * ibb: 800000-5400000 + */ + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p35>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p35: smps8 { + regulator-name = "vreg_s8c_1p4"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p2: ldo2 { + regulator-name = "vreg_l2c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-name = "vreg_l4c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l7c_2p9: ldo7 { + regulator-name = "vreg_l7c_2p9"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p7: ldo9 { + regulator-name = "vreg_l9c_2p7"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + }; + + vreg_l10c_3p0: ldo10 { + regulator-name = "vreg_l10c_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p1: ldo11 { + regulator-name = "vreg_l11c_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p35>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p1: ldo1 { + regulator-name = "vreg_l1f_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p2: ldo2 { + regulator-name = "vreg_l2f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p1: ldo3 { + regulator-name = "vreg_l3f_1p1"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4f_1p1: ldo4 { + regulator-name = "vreg_l4f_1p1"; + regulator-min-microvolt = <1096000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <1000000>; + + /* hid-over-i2c ptp @ 60 */ +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + + bq27541@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + /* onnn,redriver (DP out) @ 19 */ + /* Cirrus CS35L41 (Speaker 1) @ 40 */ + /* Cirrus CS35L41 (Speaker 2) @ 41 */ + /* Cirrus CS35L41 (Speaker 3) @ 42 */ + /* Cirrus CS35L41 (Speaker 4) @ 43 */ + /* hid-over-i2c keyboard @ 61 */ +}; + +&i2c13 { + status = "okay"; + clock-frequency = <400000>; + + /* goodix,gt738x (Touchscreen) @ 5d */ +}; + +&i2c15 { + status = "okay"; + clock-frequency = <400000>; + + /* Qcom SMB1390 @ 10 */ + /* HALO HL6111R Qi charger @ 25 */ + /* Everest-semi ES7210 4-ch ADC @ 40 */ + /* Qcom FSA4480 USB-C audio switch @ 43 */ + /* Richwave RTC6226 FM Radio Receiver @ 64 */ +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = <KEY_VOLUMEDOWN>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <40 4>; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l17a_2p5>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p8>; +};
Add the initial device tree for Lenovo Xiaoxin Pad Pro 2021 based on Qualcomm SM8250 with the following features: - SimpleFB - GPIO keys - Regulators - I2C - UFS - USB Signed-off-by: David Wronek <davidwronek@gmail.com> --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-lenovo-j716f.dts | 561 ++++++++++++++++++ 2 files changed, 562 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-lenovo-j716f.dts