diff mbox series

[v5,12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances

Message ID 20221207220012.16529-13-quic_bjorande@quicinc.com (mailing list archive)
State Superseded
Headers show
Series drm/msm: Add SC8280XP support | expand

Commit Message

Bjorn Andersson Dec. 7, 2022, 10 p.m. UTC 
From: Bjorn Andersson <bjorn.andersson@linaro.org>

The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.

Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v4:
- None

 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
 1 file changed, 241 insertions(+), 2 deletions(-)

Comments

Johan Hovold Dec. 9, 2022, 10:44 a.m. UTC | #1 
On Wed, Dec 07, 2022 at 02:00:12PM -0800, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
> 
> Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> DP PHYs and link them all together.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Changes since v4:
> - None
> 
>  arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 243 ++++++++++++++++++++++-
>  1 file changed, 241 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 6c29d7d757e0..d55c8c5304cc 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts

> +&mdss0_dp2 {
> +	status = "okay";

Please move 'status' last.

> +
> +	data-lanes = <0 1 2 3>;
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss0_dp2_phy_out: endpoint {
> +				remote-endpoint = <&edp0_connector_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss0_dp2_phy {
> +	status = "okay";

Same here.

> +
> +	vdda-phy-supply = <&vreg_l8g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss0_dp3 {
> +	status = "okay";

And here.

> +
> +	data-lanes = <0 1 2 3>;
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss0_dp3_phy_out: endpoint {
> +				remote-endpoint = <&edp1_connector_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss0_dp3_phy {
> +	status = "okay";

And here.

> +
> +	vdda-phy-supply = <&vreg_l8g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1 {
> +	status = "okay";
> +};
> +
> +&mdss1_dp0 {
> +	status = "okay";

And here.

> +
> +	data-lanes = <0 1 2 3>;
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss1_dp0_phy_out: endpoint {
> +				remote-endpoint = <&dp2_connector_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss1_dp0_phy {
> +	status = "okay";

Ditto.

> +
> +	vdda-phy-supply = <&vreg_l11g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp1 {
> +	status = "okay";

Ditto.

> +
> +	data-lanes = <0 1 2 3>;
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss1_dp1_phy_out: endpoint {
> +				remote-endpoint = <&dp3_connector_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss1_dp1_phy {
> +	status = "okay";

Ditto.

> +
> +	vdda-phy-supply = <&vreg_l11g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp2 {
> +	status = "okay";

Ditto.

> +
> +	data-lanes = <0 1 2 3>;
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss1_dp2_phy_out: endpoint {
> +				remote-endpoint = <&edp2_connector_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss1_dp2_phy {
> +	status = "okay";

Ditto.

> +
> +	vdda-phy-supply = <&vreg_l11g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};
> +
> +&mdss1_dp3 {
> +	status = "okay";

Ditto.

> +
> +	data-lanes = <0 1 2 3>;
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +			mdss1_dp3_phy_out: endpoint {
> +				remote-endpoint = <&edp3_connector_in>;
> +			};
> +		};
> +	};
> +};
> +
> +&mdss1_dp3_phy {
> +	status = "okay";

Ditto.

> +
> +	vdda-phy-supply = <&vreg_l11g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};
> +
>  &pcie2a {
>  	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
>  	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;

Johan
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 6c29d7d757e0..d55c8c5304cc 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@  aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_phy_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_phy_out>;
+			};
+		};
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp3_phy_out>;
+			};
+		};
+	};
+
+	edp2-connector {
+		compatible = "dp-connector";
+		label = "EDP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp3-connector {
+		compatible = "dp-connector";
+		label = "EDP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp3_phy_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -163,13 +247,168 @@  vreg_l7g: ldo7 {
 
 		vreg_l8g: ldo8 {
 			regulator-name = "vreg_l8g";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11g: ldo11 {
+			regulator-name = "vreg_l11g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 };
 
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp0_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp2_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp1_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp0_phy_out: endpoint {
+				remote-endpoint = <&dp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp1_phy_out: endpoint {
+				remote-endpoint = <&dp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp2_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp3_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
 &pcie2a {
 	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;