diff mbox series

arm64: dts: qcom: sm6350: Fix up the ramoops node

Message ID 20221210102600.589028-1-konrad.dybcio@linaro.org (mailing list archive)
State Accepted
Commit 3b2ff50da499178cc418f4b319e279d1b52958ed
Headers show
Series arm64: dts: qcom: sm6350: Fix up the ramoops node | expand

Commit Message

Konrad Dybcio Dec. 10, 2022, 10:25 a.m. UTC
Fix up the ramoops node to make it match bindings and style:

- remove "removed-dma-pool"
- don't pad size to 8 hex digits
- change cc-size to ecc-size so that it's used
- increase ecc-size from to 16
- remove the zeroed ftrace-size

Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Comments

Bjorn Andersson Dec. 28, 2022, 4:36 a.m. UTC | #1
On Sat, 10 Dec 2022 11:25:59 +0100, Konrad Dybcio wrote:
> Fix up the ramoops node to make it match bindings and style:
> 
> - remove "removed-dma-pool"
> - don't pad size to 8 hex digits
> - change cc-size to ecc-size so that it's used
> - increase ecc-size from to 16
> - remove the zeroed ftrace-size
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: sm6350: Fix up the ramoops node
      commit: 3b2ff50da499178cc418f4b319e279d1b52958ed

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 567f4893c562..b8e03efc44a7 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -344,13 +344,12 @@  last_log_region: memory@ffbc0000 {
 		};
 
 		ramoops: ramoops@ffc00000 {
-			compatible = "removed-dma-pool", "ramoops";
-			reg = <0 0xffc00000 0 0x00100000>;
+			compatible = "ramoops";
+			reg = <0 0xffc00000 0 0x100000>;
 			record-size = <0x1000>;
 			console-size = <0x40000>;
-			ftrace-size = <0x0>;
 			msg-size = <0x20000 0x20000>;
-			cc-size = <0x0>;
+			ecc-size = <16>;
 			no-map;
 		};