| Message ID | 20221214171145.2913557-4-bmasney@redhat.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dts: qcom: sc8280xp: add i2c, spi, and rng nodes | expand |
On 14.12.2022 18:11, Brian Masney wrote: > In preparation for adding the missing SPI and I2C nodes to > sc8280xp.dtsi, it was decided to rename all of the existing qupX_ > uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead > and rename qup0_i2c4 to i2c4. Note that some nodes are moved in the > file by this patch to preserve the expected sort order in the file. > > Signed-off-by: Brian Masney <bmasney@redhat.com> > Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/ > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > This is a new patch that's introduced in v2. > > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 58 +++++++++---------- > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 58 +++++++++---------- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- > 3 files changed, 59 insertions(+), 59 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts > index 0de1bdb68e2c..c37a9d93a2a8 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts > @@ -228,6 +228,27 @@ vreg_l9d: ldo9 { > }; > }; > > +&i2c4 { > + clock-frequency = <400000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4_default>; > + > + status = "okay"; > + > + touchscreen@10 { > + compatible = "hid-over-i2c"; > + reg = <0x10>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts0_default>; > + }; > +}; > + > &i2c21 { > clock-frequency = <400000>; > > @@ -334,27 +355,6 @@ &qup0 { > status = "okay"; > }; > > -&qup0_i2c4 { > - clock-frequency = <400000>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&qup0_i2c4_default>; > - > - status = "okay"; > - > - touchscreen@10 { > - compatible = "hid-over-i2c"; > - reg = <0x10>; > - > - hid-descr-addr = <0x1>; > - interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&ts0_default>; > - }; > -}; > - > &qup1 { > status = "okay"; > }; > @@ -494,6 +494,14 @@ hastings_reg_en: hastings-reg-en-state { > &tlmm { > gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; > > + i2c4_default: i2c4-default-state { > + pins = "gpio171", "gpio172"; > + function = "qup4"; > + > + bias-disable; > + drive-strength = <16>; > + }; > + > i2c21_default: i2c21-default-state { > pins = "gpio81", "gpio82"; > function = "qup21"; > @@ -598,14 +606,6 @@ wake-n-pins { > }; > }; > > - qup0_i2c4_default: qup0-i2c4-default-state { > - pins = "gpio171", "gpio172"; > - function = "qup4"; > - > - bias-disable; > - drive-strength = <16>; > - }; > - > tpad_default: tpad-default-state { > int-n-pins { > pins = "gpio182"; > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > index d7af2040cbcb..ec06b6216408 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > @@ -282,6 +282,28 @@ vreg_l9d: ldo9 { > }; > }; > > +&i2c4 { > + clock-frequency = <400000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4_default>; > + > + status = "okay"; > + > + /* FIXME: verify */ > + touchscreen@10 { > + compatible = "hid-over-i2c"; > + reg = <0x10>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&ts0_default>; > + }; > +}; > + > &i2c21 { > clock-frequency = <400000>; > > @@ -554,28 +576,6 @@ &qup0 { > status = "okay"; > }; > > -&qup0_i2c4 { > - clock-frequency = <400000>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&qup0_i2c4_default>; > - > - status = "okay"; > - > - /* FIXME: verify */ > - touchscreen@10 { > - compatible = "hid-over-i2c"; > - reg = <0x10>; > - > - hid-descr-addr = <0x1>; > - interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&ts0_default>; > - }; > -}; > - > &qup1 { > status = "okay"; > }; > @@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state { > bias-disable; > }; > > + i2c4_default: i2c4-default-state { > + pins = "gpio171", "gpio172"; > + function = "qup4"; > + bias-disable; > + drive-strength = <16>; > + }; > + > i2c21_default: i2c21-default-state { > pins = "gpio81", "gpio82"; > function = "qup21"; > @@ -801,13 +808,6 @@ wake-n-pins { > }; > }; > > - qup0_i2c4_default: qup0-i2c4-default-state { > - pins = "gpio171", "gpio172"; > - function = "qup4"; > - bias-disable; > - drive-strength = <16>; > - }; > - > tpad_default: tpad-default-state { > int-n-pins { > pins = "gpio182"; > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 929365cff555..f1111cd7f679 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -858,7 +858,7 @@ qup0: geniqup@9c0000 { > > status = "disabled"; > > - qup0_i2c4: i2c@990000 { > + i2c4: i2c@990000 { > compatible = "qcom,geni-i2c"; > reg = <0 0x00990000 0 0x4000>; > clock-names = "se";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 0de1bdb68e2c..c37a9d93a2a8 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -228,6 +228,27 @@ vreg_l9d: ldo9 { }; }; +&i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_default>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + &i2c21 { clock-frequency = <400000>; @@ -334,27 +355,6 @@ &qup0 { status = "okay"; }; -&qup0_i2c4 { - clock-frequency = <400000>; - - pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>; - - status = "okay"; - - touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts0_default>; - }; -}; - &qup1 { status = "okay"; }; @@ -494,6 +494,14 @@ hastings_reg_en: hastings-reg-en-state { &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + + bias-disable; + drive-strength = <16>; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; @@ -598,14 +606,6 @@ wake-n-pins { }; }; - qup0_i2c4_default: qup0-i2c4-default-state { - pins = "gpio171", "gpio172"; - function = "qup4"; - - bias-disable; - drive-strength = <16>; - }; - tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index d7af2040cbcb..ec06b6216408 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -282,6 +282,28 @@ vreg_l9d: ldo9 { }; }; +&i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_default>; + + status = "okay"; + + /* FIXME: verify */ + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts0_default>; + }; +}; + &i2c21 { clock-frequency = <400000>; @@ -554,28 +576,6 @@ &qup0 { status = "okay"; }; -&qup0_i2c4 { - clock-frequency = <400000>; - - pinctrl-names = "default"; - pinctrl-0 = <&qup0_i2c4_default>; - - status = "okay"; - - /* FIXME: verify */ - touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&ts0_default>; - }; -}; - &qup1 { status = "okay"; }; @@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state { bias-disable; }; + i2c4_default: i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + bias-disable; + drive-strength = <16>; + }; + i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; @@ -801,13 +808,6 @@ wake-n-pins { }; }; - qup0_i2c4_default: qup0-i2c4-default-state { - pins = "gpio171", "gpio172"; - function = "qup4"; - bias-disable; - drive-strength = <16>; - }; - tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 929365cff555..f1111cd7f679 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -858,7 +858,7 @@ qup0: geniqup@9c0000 { status = "disabled"; - qup0_i2c4: i2c@990000 { + i2c4: i2c@990000 { compatible = "qcom,geni-i2c"; reg = <0 0x00990000 0 0x4000>; clock-names = "se";
In preparation for adding the missing SPI and I2C nodes to sc8280xp.dtsi, it was decided to rename all of the existing qupX_ uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead and rename qup0_i2c4 to i2c4. Note that some nodes are moved in the file by this patch to preserve the expected sort order in the file. Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/ --- This is a new patch that's introduced in v2. arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 58 +++++++++---------- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 58 +++++++++---------- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- 3 files changed, 59 insertions(+), 59 deletions(-)