diff mbox series

[2/5] arm64: dts: qcom: sm6125-seine: Provide regulators to HS USB2 PHY

Message ID 20221222203636.250190-3-marijn.suijten@somainline.org (mailing list archive)
State Accepted
Headers show
Series arm64: dts: qcom: sm6125-seine: Configure regulators and enable SD Card | expand

Commit Message

Marijn Suijten Dec. 22, 2022, 8:36 p.m. UTC
Document the use of l7, l10 and l15 in the High Speed Qualcomm USB2 PHY,
in order to keep the regulators voted on when USB is active.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 3 +++
 1 file changed, 3 insertions(+)

Comments

Konrad Dybcio Dec. 23, 2022, 11:58 a.m. UTC | #1
On 22.12.2022 21:36, Marijn Suijten wrote:
> Document the use of l7, l10 and l15 in the High Speed Qualcomm USB2 PHY,
> in order to keep the regulators voted on when USB is active.
> 
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> index 4f825c55692b..15b43cff210b 100644
> --- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
> @@ -147,6 +147,9 @@ &gpi_dma0 {
>  };
>  
>  &hsusb_phy1 {
> +	vdd-supply = <&pm6125_l7>;
> +	vdda-pll-supply = <&pm6125_l10>;
> +	vdda-phy-dpdm-supply = <&pm6125_l15>;
>  	status = "okay";
>  };
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 4f825c55692b..15b43cff210b 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -147,6 +147,9 @@  &gpi_dma0 {
 };
 
 &hsusb_phy1 {
+	vdd-supply = <&pm6125_l7>;
+	vdda-pll-supply = <&pm6125_l10>;
+	vdda-phy-dpdm-supply = <&pm6125_l15>;
 	status = "okay";
 };