| Message ID | 20221222221441.6980-3-quic_jesszhan@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Support for Solid Fill Planes | expand |
On 23/12/2022 00:14, Jessica Zhang wrote: > Loosen the requirements for atomic and legacy commit so that, in cases > where solid fill planes is enabled (and FB_ID is NULL), the commit can > still go through. > > In addition, add framebuffer NULL checks in other areas to account for > FB being NULL when solid fill is enabled. > > Changes in V2: > - Changed to checks for if solid_fill_blob is set (Dmitry) > - Abstracted (plane_state && !solid_fill_blob) checks to helper method > (Dmitry) > - Fixed indentation issue (Dmitry) > > Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> > --- > drivers/gpu/drm/drm_atomic.c | 69 ++++++++++++++++------------- > drivers/gpu/drm/drm_atomic_helper.c | 34 ++++++++------ > drivers/gpu/drm/drm_plane.c | 8 ++-- > include/drm/drm_atomic_helper.h | 6 ++- > include/drm/drm_plane.h | 12 +++++ > 5 files changed, 78 insertions(+), 51 deletions(-) > > diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c > index f197f59f6d99..b92d75bda7fd 100644 > --- a/drivers/gpu/drm/drm_atomic.c > +++ b/drivers/gpu/drm/drm_atomic.c > @@ -601,8 +601,10 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state, > uint32_t num_clips; > int ret; > > - /* either *both* CRTC and FB must be set, or neither */ > - if (crtc && !fb) { > + /* When solid_fill is disabled, > + * either *both* CRTC and FB must be set, or neither > + */ The cause and effect logic seems to be broken here. I'd expect something like: "When CRTC is set, at least one of fb and solid_fill should be set." Also it might be worth defining bool drm_plane_has_visible_data(struct drm_plane_state *state) { return state->fb || drm_plane_solid_fill_enabled(state); } Then you can use this function here and below, where you check both fb and solid_fill property. > + if (crtc && !fb && !new_plane_state->solid_fill_blob) { > drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] CRTC set but no FB\n", > plane->base.id, plane->name); > return -EINVAL; > @@ -626,14 +628,17 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state, > } > > /* Check whether this plane supports the fb pixel format. */ > - ret = drm_plane_check_pixel_format(plane, fb->format->format, > - fb->modifier); > - if (ret) { > - drm_dbg_atomic(plane->dev, > - "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n", > - plane->base.id, plane->name, > - &fb->format->format, fb->modifier); > - return ret; > + if (fb) { > + ret = drm_plane_check_pixel_format(plane, fb->format->format, > + fb->modifier); > + > + if (ret) { > + drm_dbg_atomic(plane->dev, > + "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n", > + plane->base.id, plane->name, > + &fb->format->format, fb->modifier); > + return ret; > + } I'd suggest merging twof if(fb) blocks and extracting them to a separate functions. > } > > /* Give drivers some help against integer overflows */ > @@ -649,28 +654,30 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state, > return -ERANGE; > } > > - fb_width = fb->width << 16; > - fb_height = fb->height << 16; > + if (fb) { > + fb_width = fb->width << 16; > + fb_height = fb->height << 16; > > - /* Make sure source coordinates are inside the fb. */ > - if (new_plane_state->src_w > fb_width || > - new_plane_state->src_x > fb_width - new_plane_state->src_w || > - new_plane_state->src_h > fb_height || > - new_plane_state->src_y > fb_height - new_plane_state->src_h) { > - drm_dbg_atomic(plane->dev, > - "[PLANE:%d:%s] invalid source coordinates " > - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n", > - plane->base.id, plane->name, > - new_plane_state->src_w >> 16, > - ((new_plane_state->src_w & 0xffff) * 15625) >> 10, > - new_plane_state->src_h >> 16, > - ((new_plane_state->src_h & 0xffff) * 15625) >> 10, > - new_plane_state->src_x >> 16, > - ((new_plane_state->src_x & 0xffff) * 15625) >> 10, > - new_plane_state->src_y >> 16, > - ((new_plane_state->src_y & 0xffff) * 15625) >> 10, > - fb->width, fb->height); > - return -ENOSPC; > + /* Make sure source coordinates are inside the fb. */ > + if (new_plane_state->src_w > fb_width || > + new_plane_state->src_x > fb_width - new_plane_state->src_w || > + new_plane_state->src_h > fb_height || > + new_plane_state->src_y > fb_height - new_plane_state->src_h) { > + drm_dbg_atomic(plane->dev, > + "[PLANE:%d:%s] invalid source coordinates " > + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n", > + plane->base.id, plane->name, > + new_plane_state->src_w >> 16, > + ((new_plane_state->src_w & 0xffff) * 15625) >> 10, > + new_plane_state->src_h >> 16, > + ((new_plane_state->src_h & 0xffff) * 15625) >> 10, > + new_plane_state->src_x >> 16, > + ((new_plane_state->src_x & 0xffff) * 15625) >> 10, > + new_plane_state->src_y >> 16, > + ((new_plane_state->src_y & 0xffff) * 15625) >> 10, > + fb->width, fb->height); > + return -ENOSPC; > + } > } > > clips = __drm_plane_get_damage_clips(new_plane_state); > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c > index 1a586b3c454b..b53897f882c1 100644 > --- a/drivers/gpu/drm/drm_atomic_helper.c > +++ b/drivers/gpu/drm/drm_atomic_helper.c > @@ -864,7 +864,7 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, > *src = drm_plane_state_src(plane_state); > *dst = drm_plane_state_dest(plane_state); > > - if (!fb) { > + if (!fb && !drm_plane_solid_fill_enabled(plane_state)) { > plane_state->visible = false; > return 0; > } > @@ -881,25 +881,31 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, > return -EINVAL; > } > > - drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation); > + if (fb) { > + drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation); > > - /* Check scaling */ > - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); > - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); > - if (hscale < 0 || vscale < 0) { > - drm_dbg_kms(plane_state->plane->dev, > - "Invalid scaling of plane\n"); > - drm_rect_debug_print("src: ", &plane_state->src, true); > - drm_rect_debug_print("dst: ", &plane_state->dst, false); > - return -ERANGE; > + /* Check scaling */ > + hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); > + vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); > + > + if (hscale < 0 || vscale < 0) { > + drm_dbg_kms(plane_state->plane->dev, > + "Invalid scaling of plane\n"); > + drm_rect_debug_print("src: ", &plane_state->src, true); > + drm_rect_debug_print("dst: ", &plane_state->dst, false); > + return -ERANGE; > + } > } > > if (crtc_state->enable) > drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2); > > - plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); > - > - drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation); > + if (drm_plane_solid_fill_enabled(plane_state)) { > + plane_state->visible = true; > + } else if (fb) { > + plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); > + drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation); > + } I'd invert the order here: if (fb) .... else if (drm_plane_solid_fill_enabled(...) .... > > if (!plane_state->visible) > /* > diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c > index 33357629a7f5..bdce2acbef6a 100644 > --- a/drivers/gpu/drm/drm_plane.c > +++ b/drivers/gpu/drm/drm_plane.c > @@ -856,8 +856,8 @@ static int __setplane_internal(struct drm_plane *plane, > > WARN_ON(drm_drv_uses_atomic_modeset(plane->dev)); > > - /* No fb means shut it down */ > - if (!fb) { > + /* No fb and no color fill means shut it down */ > + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) { > plane->old_fb = plane->fb; > ret = plane->funcs->disable_plane(plane, ctx); > if (!ret) { > @@ -908,8 +908,8 @@ static int __setplane_atomic(struct drm_plane *plane, > > WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev)); > > - /* No fb means shut it down */ > - if (!fb) > + /* No fb and no color fill means shut it down */ > + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) > return plane->funcs->disable_plane(plane, ctx); > > /* > diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h > index 33f982cd1a27..16a2a8edcc68 100644 > --- a/include/drm/drm_atomic_helper.h > +++ b/include/drm/drm_atomic_helper.h > @@ -230,8 +230,10 @@ drm_atomic_plane_disabling(struct drm_plane_state *old_plane_state, > * Anything else should be considered a bug in the atomic core, so we > * gently warn about it. > */ > - WARN_ON((new_plane_state->crtc == NULL && new_plane_state->fb != NULL) || > - (new_plane_state->crtc != NULL && new_plane_state->fb == NULL)); > + WARN_ON(!new_plane_state->solid_fill_blob && > + ((new_plane_state->crtc == NULL && new_plane_state->fb != NULL) || > + (new_plane_state->crtc != NULL && > + new_plane_state->fb == NULL))); Not quite. This means that if solid_fill_blob is set, then it doesn't matter whether crtc or fb is NULL. Also please fix the indentation of your changes. Original code was logical, your indent is not. > > return old_plane_state->crtc && !new_plane_state->crtc; > } > diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h > index be5ab5f7b477..a9e6a09a75f7 100644 > --- a/include/drm/drm_plane.h > +++ b/include/drm/drm_plane.h > @@ -977,6 +977,18 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev, > #define drm_for_each_plane(plane, dev) \ > list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) > > +/** > + * drm_plane_solid_fill_enabled - Check if solid fill is enabled on plane > + * @state: plane state > + * > + * Returns: > + * Whether the plane has been assigned a solid_fill_blob > + */ > +static inline bool drm_plane_solid_fill_enabled(struct drm_plane_state *state) > +{ > + return state && state->solid_fill_blob; > +} > + > bool drm_any_plane_has_format(struct drm_device *dev, > u32 format, u64 modifier); >
On 12/22/2022 7:08 PM, Dmitry Baryshkov wrote: > On 23/12/2022 00:14, Jessica Zhang wrote: >> Loosen the requirements for atomic and legacy commit so that, in cases >> where solid fill planes is enabled (and FB_ID is NULL), the commit can >> still go through. >> >> In addition, add framebuffer NULL checks in other areas to account for >> FB being NULL when solid fill is enabled. >> >> Changes in V2: >> - Changed to checks for if solid_fill_blob is set (Dmitry) >> - Abstracted (plane_state && !solid_fill_blob) checks to helper method >> (Dmitry) >> - Fixed indentation issue (Dmitry) >> >> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> >> --- >> drivers/gpu/drm/drm_atomic.c | 69 ++++++++++++++++------------- >> drivers/gpu/drm/drm_atomic_helper.c | 34 ++++++++------ >> drivers/gpu/drm/drm_plane.c | 8 ++-- >> include/drm/drm_atomic_helper.h | 6 ++- >> include/drm/drm_plane.h | 12 +++++ >> 5 files changed, 78 insertions(+), 51 deletions(-) >> >> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c >> index f197f59f6d99..b92d75bda7fd 100644 >> --- a/drivers/gpu/drm/drm_atomic.c >> +++ b/drivers/gpu/drm/drm_atomic.c >> @@ -601,8 +601,10 @@ static int drm_atomic_plane_check(const struct >> drm_plane_state *old_plane_state, >> uint32_t num_clips; >> int ret; >> - /* either *both* CRTC and FB must be set, or neither */ >> - if (crtc && !fb) { >> + /* When solid_fill is disabled, >> + * either *both* CRTC and FB must be set, or neither >> + */ > > The cause and effect logic seems to be broken here. I'd expect something > like: "When CRTC is set, at least one of fb and solid_fill should be set." > > Also it might be worth defining > bool drm_plane_has_visible_data(struct drm_plane_state *state) > { > return state->fb || drm_plane_solid_fill_enabled(state); > } > > Then you can use this function here and below, where you check both fb > and solid_fill property. Hi Dmitry, Sounds good, that makes more sense. > >> + if (crtc && !fb && !new_plane_state->solid_fill_blob) { >> drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] CRTC set but no >> FB\n", >> plane->base.id, plane->name); >> return -EINVAL; >> @@ -626,14 +628,17 @@ static int drm_atomic_plane_check(const struct >> drm_plane_state *old_plane_state, >> } >> /* Check whether this plane supports the fb pixel format. */ >> - ret = drm_plane_check_pixel_format(plane, fb->format->format, >> - fb->modifier); >> - if (ret) { >> - drm_dbg_atomic(plane->dev, >> - "[PLANE:%d:%s] invalid pixel format %p4cc, >> modifier 0x%llx\n", >> - plane->base.id, plane->name, >> - &fb->format->format, fb->modifier); >> - return ret; >> + if (fb) { >> + ret = drm_plane_check_pixel_format(plane, fb->format->format, >> + fb->modifier); >> + >> + if (ret) { >> + drm_dbg_atomic(plane->dev, >> + "[PLANE:%d:%s] invalid pixel format %p4cc, >> modifier 0x%llx\n", >> + plane->base.id, plane->name, >> + &fb->format->format, fb->modifier); >> + return ret; >> + } > > I'd suggest merging twof if(fb) blocks and extracting them to a separate > functions. Noted. > >> } >> /* Give drivers some help against integer overflows */ >> @@ -649,28 +654,30 @@ static int drm_atomic_plane_check(const struct >> drm_plane_state *old_plane_state, >> return -ERANGE; >> } >> - fb_width = fb->width << 16; >> - fb_height = fb->height << 16; >> + if (fb) { >> + fb_width = fb->width << 16; >> + fb_height = fb->height << 16; >> - /* Make sure source coordinates are inside the fb. */ >> - if (new_plane_state->src_w > fb_width || >> - new_plane_state->src_x > fb_width - new_plane_state->src_w || >> - new_plane_state->src_h > fb_height || >> - new_plane_state->src_y > fb_height - new_plane_state->src_h) { >> - drm_dbg_atomic(plane->dev, >> - "[PLANE:%d:%s] invalid source coordinates " >> - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n", >> - plane->base.id, plane->name, >> - new_plane_state->src_w >> 16, >> - ((new_plane_state->src_w & 0xffff) * 15625) >> 10, >> - new_plane_state->src_h >> 16, >> - ((new_plane_state->src_h & 0xffff) * 15625) >> 10, >> - new_plane_state->src_x >> 16, >> - ((new_plane_state->src_x & 0xffff) * 15625) >> 10, >> - new_plane_state->src_y >> 16, >> - ((new_plane_state->src_y & 0xffff) * 15625) >> 10, >> - fb->width, fb->height); >> - return -ENOSPC; >> + /* Make sure source coordinates are inside the fb. */ >> + if (new_plane_state->src_w > fb_width || >> + new_plane_state->src_x > fb_width - >> new_plane_state->src_w || >> + new_plane_state->src_h > fb_height || >> + new_plane_state->src_y > fb_height - >> new_plane_state->src_h) { >> + drm_dbg_atomic(plane->dev, >> + "[PLANE:%d:%s] invalid source coordinates " >> + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n", >> + plane->base.id, plane->name, >> + new_plane_state->src_w >> 16, >> + ((new_plane_state->src_w & 0xffff) * 15625) >> >> 10, >> + new_plane_state->src_h >> 16, >> + ((new_plane_state->src_h & 0xffff) * 15625) >> >> 10, >> + new_plane_state->src_x >> 16, >> + ((new_plane_state->src_x & 0xffff) * 15625) >> >> 10, >> + new_plane_state->src_y >> 16, >> + ((new_plane_state->src_y & 0xffff) * 15625) >> >> 10, >> + fb->width, fb->height); >> + return -ENOSPC; >> + } >> } >> clips = __drm_plane_get_damage_clips(new_plane_state); >> diff --git a/drivers/gpu/drm/drm_atomic_helper.c >> b/drivers/gpu/drm/drm_atomic_helper.c >> index 1a586b3c454b..b53897f882c1 100644 >> --- a/drivers/gpu/drm/drm_atomic_helper.c >> +++ b/drivers/gpu/drm/drm_atomic_helper.c >> @@ -864,7 +864,7 @@ int drm_atomic_helper_check_plane_state(struct >> drm_plane_state *plane_state, >> *src = drm_plane_state_src(plane_state); >> *dst = drm_plane_state_dest(plane_state); >> - if (!fb) { >> + if (!fb && !drm_plane_solid_fill_enabled(plane_state)) { >> plane_state->visible = false; >> return 0; >> } >> @@ -881,25 +881,31 @@ int drm_atomic_helper_check_plane_state(struct >> drm_plane_state *plane_state, >> return -EINVAL; >> } >> - drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation); >> + if (fb) { >> + drm_rect_rotate(src, fb->width << 16, fb->height << 16, >> rotation); >> - /* Check scaling */ >> - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); >> - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); >> - if (hscale < 0 || vscale < 0) { >> - drm_dbg_kms(plane_state->plane->dev, >> - "Invalid scaling of plane\n"); >> - drm_rect_debug_print("src: ", &plane_state->src, true); >> - drm_rect_debug_print("dst: ", &plane_state->dst, false); >> - return -ERANGE; >> + /* Check scaling */ >> + hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); >> + vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); >> + >> + if (hscale < 0 || vscale < 0) { >> + drm_dbg_kms(plane_state->plane->dev, >> + "Invalid scaling of plane\n"); >> + drm_rect_debug_print("src: ", &plane_state->src, true); >> + drm_rect_debug_print("dst: ", &plane_state->dst, false); >> + return -ERANGE; >> + } >> } >> if (crtc_state->enable) >> drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2); >> - plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); >> - >> - drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, >> rotation); >> + if (drm_plane_solid_fill_enabled(plane_state)) { >> + plane_state->visible = true; >> + } else if (fb) { >> + plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); >> + drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, >> rotation); >> + } > > I'd invert the order here: > > if (fb) > .... > else if (drm_plane_solid_fill_enabled(...) > .... > Noted. >> if (!plane_state->visible) >> /* >> diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c >> index 33357629a7f5..bdce2acbef6a 100644 >> --- a/drivers/gpu/drm/drm_plane.c >> +++ b/drivers/gpu/drm/drm_plane.c >> @@ -856,8 +856,8 @@ static int __setplane_internal(struct drm_plane >> *plane, >> WARN_ON(drm_drv_uses_atomic_modeset(plane->dev)); >> - /* No fb means shut it down */ >> - if (!fb) { >> + /* No fb and no color fill means shut it down */ >> + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) { >> plane->old_fb = plane->fb; >> ret = plane->funcs->disable_plane(plane, ctx); >> if (!ret) { >> @@ -908,8 +908,8 @@ static int __setplane_atomic(struct drm_plane *plane, >> WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev)); >> - /* No fb means shut it down */ >> - if (!fb) >> + /* No fb and no color fill means shut it down */ >> + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) >> return plane->funcs->disable_plane(plane, ctx); >> /* >> diff --git a/include/drm/drm_atomic_helper.h >> b/include/drm/drm_atomic_helper.h >> index 33f982cd1a27..16a2a8edcc68 100644 >> --- a/include/drm/drm_atomic_helper.h >> +++ b/include/drm/drm_atomic_helper.h >> @@ -230,8 +230,10 @@ drm_atomic_plane_disabling(struct drm_plane_state >> *old_plane_state, >> * Anything else should be considered a bug in the atomic core, >> so we >> * gently warn about it. >> */ >> - WARN_ON((new_plane_state->crtc == NULL && new_plane_state->fb != >> NULL) || >> - (new_plane_state->crtc != NULL && new_plane_state->fb == NULL)); >> + WARN_ON(!new_plane_state->solid_fill_blob && >> + ((new_plane_state->crtc == NULL && new_plane_state->fb != >> NULL) || >> + (new_plane_state->crtc != NULL && >> + new_plane_state->fb == NULL))); > > Not quite. This means that if solid_fill_blob is set, then it doesn't > matter whether crtc or fb is NULL. Good point -- will change the conditional to something similar to the one in drm_atomic_plane_check() > > Also please fix the indentation of your changes. Original code was > logical, your indent is not. Ah, I see what you mean. Should have aligned the parentheses instead of indenting more. Thanks, Jessica Zhang > >> return old_plane_state->crtc && !new_plane_state->crtc; >> } >> diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h >> index be5ab5f7b477..a9e6a09a75f7 100644 >> --- a/include/drm/drm_plane.h >> +++ b/include/drm/drm_plane.h >> @@ -977,6 +977,18 @@ static inline struct drm_plane >> *drm_plane_find(struct drm_device *dev, >> #define drm_for_each_plane(plane, dev) \ >> list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) >> +/** >> + * drm_plane_solid_fill_enabled - Check if solid fill is enabled on >> plane >> + * @state: plane state >> + * >> + * Returns: >> + * Whether the plane has been assigned a solid_fill_blob >> + */ >> +static inline bool drm_plane_solid_fill_enabled(struct >> drm_plane_state *state) >> +{ >> + return state && state->solid_fill_blob; >> +} >> + >> bool drm_any_plane_has_format(struct drm_device *dev, >> u32 format, u64 modifier); > > -- > With best wishes > Dmitry >
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index f197f59f6d99..b92d75bda7fd 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -601,8 +601,10 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state, uint32_t num_clips; int ret; - /* either *both* CRTC and FB must be set, or neither */ - if (crtc && !fb) { + /* When solid_fill is disabled, + * either *both* CRTC and FB must be set, or neither + */ + if (crtc && !fb && !new_plane_state->solid_fill_blob) { drm_dbg_atomic(plane->dev, "[PLANE:%d:%s] CRTC set but no FB\n", plane->base.id, plane->name); return -EINVAL; @@ -626,14 +628,17 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state, } /* Check whether this plane supports the fb pixel format. */ - ret = drm_plane_check_pixel_format(plane, fb->format->format, - fb->modifier); - if (ret) { - drm_dbg_atomic(plane->dev, - "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n", - plane->base.id, plane->name, - &fb->format->format, fb->modifier); - return ret; + if (fb) { + ret = drm_plane_check_pixel_format(plane, fb->format->format, + fb->modifier); + + if (ret) { + drm_dbg_atomic(plane->dev, + "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n", + plane->base.id, plane->name, + &fb->format->format, fb->modifier); + return ret; + } } /* Give drivers some help against integer overflows */ @@ -649,28 +654,30 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state, return -ERANGE; } - fb_width = fb->width << 16; - fb_height = fb->height << 16; + if (fb) { + fb_width = fb->width << 16; + fb_height = fb->height << 16; - /* Make sure source coordinates are inside the fb. */ - if (new_plane_state->src_w > fb_width || - new_plane_state->src_x > fb_width - new_plane_state->src_w || - new_plane_state->src_h > fb_height || - new_plane_state->src_y > fb_height - new_plane_state->src_h) { - drm_dbg_atomic(plane->dev, - "[PLANE:%d:%s] invalid source coordinates " - "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n", - plane->base.id, plane->name, - new_plane_state->src_w >> 16, - ((new_plane_state->src_w & 0xffff) * 15625) >> 10, - new_plane_state->src_h >> 16, - ((new_plane_state->src_h & 0xffff) * 15625) >> 10, - new_plane_state->src_x >> 16, - ((new_plane_state->src_x & 0xffff) * 15625) >> 10, - new_plane_state->src_y >> 16, - ((new_plane_state->src_y & 0xffff) * 15625) >> 10, - fb->width, fb->height); - return -ENOSPC; + /* Make sure source coordinates are inside the fb. */ + if (new_plane_state->src_w > fb_width || + new_plane_state->src_x > fb_width - new_plane_state->src_w || + new_plane_state->src_h > fb_height || + new_plane_state->src_y > fb_height - new_plane_state->src_h) { + drm_dbg_atomic(plane->dev, + "[PLANE:%d:%s] invalid source coordinates " + "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n", + plane->base.id, plane->name, + new_plane_state->src_w >> 16, + ((new_plane_state->src_w & 0xffff) * 15625) >> 10, + new_plane_state->src_h >> 16, + ((new_plane_state->src_h & 0xffff) * 15625) >> 10, + new_plane_state->src_x >> 16, + ((new_plane_state->src_x & 0xffff) * 15625) >> 10, + new_plane_state->src_y >> 16, + ((new_plane_state->src_y & 0xffff) * 15625) >> 10, + fb->width, fb->height); + return -ENOSPC; + } } clips = __drm_plane_get_damage_clips(new_plane_state); diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 1a586b3c454b..b53897f882c1 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -864,7 +864,7 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, *src = drm_plane_state_src(plane_state); *dst = drm_plane_state_dest(plane_state); - if (!fb) { + if (!fb && !drm_plane_solid_fill_enabled(plane_state)) { plane_state->visible = false; return 0; } @@ -881,25 +881,31 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, return -EINVAL; } - drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation); + if (fb) { + drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation); - /* Check scaling */ - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); - if (hscale < 0 || vscale < 0) { - drm_dbg_kms(plane_state->plane->dev, - "Invalid scaling of plane\n"); - drm_rect_debug_print("src: ", &plane_state->src, true); - drm_rect_debug_print("dst: ", &plane_state->dst, false); - return -ERANGE; + /* Check scaling */ + hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); + vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); + + if (hscale < 0 || vscale < 0) { + drm_dbg_kms(plane_state->plane->dev, + "Invalid scaling of plane\n"); + drm_rect_debug_print("src: ", &plane_state->src, true); + drm_rect_debug_print("dst: ", &plane_state->dst, false); + return -ERANGE; + } } if (crtc_state->enable) drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2); - plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); - - drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation); + if (drm_plane_solid_fill_enabled(plane_state)) { + plane_state->visible = true; + } else if (fb) { + plane_state->visible = drm_rect_clip_scaled(src, dst, &clip); + drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation); + } if (!plane_state->visible) /* diff --git a/drivers/gpu/drm/drm_plane.c b/drivers/gpu/drm/drm_plane.c index 33357629a7f5..bdce2acbef6a 100644 --- a/drivers/gpu/drm/drm_plane.c +++ b/drivers/gpu/drm/drm_plane.c @@ -856,8 +856,8 @@ static int __setplane_internal(struct drm_plane *plane, WARN_ON(drm_drv_uses_atomic_modeset(plane->dev)); - /* No fb means shut it down */ - if (!fb) { + /* No fb and no color fill means shut it down */ + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) { plane->old_fb = plane->fb; ret = plane->funcs->disable_plane(plane, ctx); if (!ret) { @@ -908,8 +908,8 @@ static int __setplane_atomic(struct drm_plane *plane, WARN_ON(!drm_drv_uses_atomic_modeset(plane->dev)); - /* No fb means shut it down */ - if (!fb) + /* No fb and no color fill means shut it down */ + if (!fb && !drm_plane_solid_fill_enabled(plane->state)) return plane->funcs->disable_plane(plane, ctx); /* diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 33f982cd1a27..16a2a8edcc68 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -230,8 +230,10 @@ drm_atomic_plane_disabling(struct drm_plane_state *old_plane_state, * Anything else should be considered a bug in the atomic core, so we * gently warn about it. */ - WARN_ON((new_plane_state->crtc == NULL && new_plane_state->fb != NULL) || - (new_plane_state->crtc != NULL && new_plane_state->fb == NULL)); + WARN_ON(!new_plane_state->solid_fill_blob && + ((new_plane_state->crtc == NULL && new_plane_state->fb != NULL) || + (new_plane_state->crtc != NULL && + new_plane_state->fb == NULL))); return old_plane_state->crtc && !new_plane_state->crtc; } diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index be5ab5f7b477..a9e6a09a75f7 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -977,6 +977,18 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev, #define drm_for_each_plane(plane, dev) \ list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) +/** + * drm_plane_solid_fill_enabled - Check if solid fill is enabled on plane + * @state: plane state + * + * Returns: + * Whether the plane has been assigned a solid_fill_blob + */ +static inline bool drm_plane_solid_fill_enabled(struct drm_plane_state *state) +{ + return state && state->solid_fill_blob; +} + bool drm_any_plane_has_format(struct drm_device *dev, u32 format, u64 modifier);
Loosen the requirements for atomic and legacy commit so that, in cases where solid fill planes is enabled (and FB_ID is NULL), the commit can still go through. In addition, add framebuffer NULL checks in other areas to account for FB being NULL when solid fill is enabled. Changes in V2: - Changed to checks for if solid_fill_blob is set (Dmitry) - Abstracted (plane_state && !solid_fill_blob) checks to helper method (Dmitry) - Fixed indentation issue (Dmitry) Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> --- drivers/gpu/drm/drm_atomic.c | 69 ++++++++++++++++------------- drivers/gpu/drm/drm_atomic_helper.c | 34 ++++++++------ drivers/gpu/drm/drm_plane.c | 8 ++-- include/drm/drm_atomic_helper.h | 6 ++- include/drm/drm_plane.h | 12 +++++ 5 files changed, 78 insertions(+), 51 deletions(-)