diff mbox series

[2/2] arm64: dts: qcom: sm8350-sony-xperia-sagami: specify which LDO modes are allowed

Message ID 20221228112456.31348-2-krzysztof.kozlowski@linaro.org (mailing list archive)
State Accepted
Headers show
Series [1/2] arm64: dts: qcom: sm8350: add missing core_bi_pll_test_se GCC clock | expand

Commit Message

Krzysztof Kozlowski Dec. 28, 2022, 11:24 a.m. UTC 
This board uses RPMH, specifies "regulator-allow-set-load" for LDOs,
but doesn't specify any modes with "regulator-allowed-modes":

  sm8350-sony-xperia-sagami-pdx214.dtb: regulators-0: ldo5: 'regulator-allowed-modes' is a dependency of 'regulator-allow-set-load'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index 4862fd69413e..a403fabc8da7 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -171,6 +171,8 @@  pm8350_l5: ldo5 {
 			regulator-max-microvolt = <888000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		pm8350_l6: ldo6 {
@@ -179,6 +181,8 @@  pm8350_l6: ldo6 {
 			regulator-max-microvolt = <1208000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		pm8350_l7: ldo7 {
@@ -187,6 +191,8 @@  pm8350_l7: ldo7 {
 			regulator-max-microvolt = <3008000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		/* L8 - lcx.lvl (ARC) */
@@ -197,6 +203,8 @@  pm8350_l9: ldo9 {
 			regulator-max-microvolt = <1200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
 		};
 	};