diff mbox series

[v2,3/7] arm64: dts: qcom: sm8450-nagara: Add GPIO line names for PMIC GPIOs

Message ID 20221229103212.984324-3-konrad.dybcio@linaro.org (mailing list archive)
State Accepted
Commit 4c5ab70d11ba591e28d4b07e50847084141c2374
Headers show
Series [v2,1/7] arm64: dts: qcom: sm8450: add spmi node | expand

Commit Message

Konrad Dybcio Dec. 29, 2022, 10:32 a.m. UTC 
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX223&224 DTSIs to better document the hardware.

Diff between 223 and 224:
pm8350b
< 			  "CAM_PWR_LD_EN",
> 			  "NC",

pm8350c
<			  "RGBC_IR_PWR_EN",
> 			  "NC",

Which is due to different camera power wiring on 223 and lack of a
ToF sensor on 224.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 .../qcom/sm8450-sony-xperia-nagara-pdx223.dts | 23 ++++++++++++++++
 .../qcom/sm8450-sony-xperia-nagara-pdx224.dts | 23 ++++++++++++++++
 .../dts/qcom/sm8450-sony-xperia-nagara.dtsi   | 27 +++++++++++++++++++
 3 files changed, 73 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
index b83500316a81..561cd4f09ab7 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx223.dts
@@ -13,6 +13,29 @@  / {
 	compatible = "sony,pdx223", "qcom,sm8450";
 };
 
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "CAM_PWR_LD_EN",
+			  "NC",
+			  "FOCUS_N";
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "WLC_ID",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "RGBC_IR_PWR_EN",
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
+
 &tlmm {
 	gpio-line-names = "NC", /* GPIO_0 */
 			  "NC",
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
index 13c2fc4bccfc..fc9d74d0f227 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara-pdx224.dts
@@ -20,6 +20,29 @@  imx563_vdig_vreg: imx563-vdig-regulator {
 	};
 };
 
+&pm8350b_gpios {
+	gpio-line-names = "CAM_PWR_A_CS", /* GPIO_1 */
+			  "NC",
+			  "NC",
+			  "NC",
+			  "SNAPSHOT_N",
+			  "NC",
+			  "NC",
+			  "FOCUS_N";
+};
+
+&pm8350c_gpios {
+	gpio-line-names = "FL_STROBE_TRIG_WIDE", /* GPIO_1 */
+			  "FL_STROBE_TRIG_TELE",
+			  "WLC_ID",
+			  "WLC_TXPWR_EN",
+			  "NC",
+			  "NC", /* RGBCIR uses a PMIC vreg, so it's most likely NC. */
+			  "NC",
+			  "NC",
+			  "WIDEC_PWR_EN";
+};
+
 &tlmm {
 	gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */
 			  "TELE_SPI_MOSI", /* SONY says NC, but it only makes sense this way.. */
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index e29fb7adc780..8e128efcb128 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -551,6 +551,33 @@  &pcie0_phy {
 	status = "okay";
 };
 
+&pm8350_gpios {
+	gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
+			  "LCD_ID",
+			  "SDR_MMW_THERM",
+			  "RF_ID",
+			  "NC",
+			  "VOL_DOWN_N",
+			  "NC",
+			  "NC",
+			  "NC",
+			  "PM8350_OPTION"; /* GPIO_10 */
+};
+
+&pm8450_gpios {
+	gpio-line-names = "FP_LDO_EN", /* GPIO_1 */
+			  "",
+			  "",
+			  "";
+};
+
+&pmk8350_gpios {
+	gpio-line-names = "NC", /* GPIO_1 */
+			  "NC",
+			  "DISP_THERM",
+			  "PMK8350_OPTION";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn";
 	status = "okay";